From: martin.ereth@arcor.de (Martin Ereth)
To: linux-arm-kernel@lists.infradead.org
Subject: strange characters on serial port when booting kernel on at91sam9263 board
Date: Sun, 30 May 2010 17:16:42 +0200 [thread overview]
Message-ID: <4C02815A.8090402@arcor.de> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I have a board which is based on the AT91SAM9263-EK but with a little
but annoying difference: SDRAM is smaller.
Thus I cannot use prebuilt images. I've compiled AT91Bootstrap-1.15
which directly loads the linux kernel (2.6.34).
I've tried a linux kernel built with buildroot and one compiled on my
own using the toolchain of buildroot. Both are in uncompressed uImage
format.
When watching the serial port I get the output shown here [1]. After the
last line, part [2] shows up. That looks like a wrong speed of the
serial port. But I've tried all known speeds (using cu) but no good
characters are showing up. :(
The serial port is configured for 115200 baud. I am starting linux with
console=ttyS0,115200.
I think this is a problem with the kernel, maybe a wrong frequency or
baud rate?
What can I try to get the kernel running on this board?
Is it better to compile the kernel on my own? What patches are recommended?
Do I need to change the SDRAM size somewhere in the kernel sources or is
this detected automatically?
Thanks a lot in advance,
Martin
[1] (please do not feel disturbed by some debugging output)
RomBOOT
>Start AT91Bootstrap...
init SDRAM
init sdramc_hw
sdramc_hw ok
SDRAM ok
======= load image header from nandflash =======
init nandflash_hw
nandflash_hw init ok
nandflash_cfg_8bits_dbw_init ok
======= load image from nandflash =======
init nandflash_hw
nandflash_hw init ok
nandflash_cfg_8bits_dbw_init ok
======= jump to entry point =======
Uncompressing Linux... done, booting the kernel.
[2]
?*S???N???A?
?1?Y?HWK???x*??A?
???V?,1?q?*P/?????Y$?a?#
???e?1
(and so on)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAkwCgVkACgkQE5UqXaCvB8LyPgCgkjIUi3cMCOTzxqFey+OqKtE5
qq4AoLFu5OHbima0ipQNuj6PZ7qOH8Fq
=vfNO
-----END PGP SIGNATURE-----
reply other threads:[~2010-05-30 15:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C02815A.8090402@arcor.de \
--to=martin.ereth@arcor.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.