From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4C0381BF.80002@domain.hid> Date: Mon, 31 May 2010 11:30:39 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4C036DF6.8020201@domain.hid> In-Reply-To: <4C036DF6.8020201@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] 2.6.32 patch for arm? List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Albert Veli Cc: xenomai@xenomai.org Albert Veli wrote: > Dear xenomai-help list, > > I am looking at the ipipe patch for a custom arm-board. The linux kernel > version is 2.6.32.x (currently 2.6.32.14). It was chosen because it is > defined to be a "long-term" stable release and we do not plan on > changing the minor version very often. > > Now the problem is that ipipe patches for 2.6.32.x are only available > for x86 and ppc. For arm I can only find 2.6.30.x, 2.6.31.x and 2.6.33.x > but not 2.6.32.x. > > Are there any plans for creating an ipipe arm-patch for 2.6.32.x? I have > tried to port the 2.6.33 patch back to 2.6.32 but it is a pretty > intrusive patch and the chance for me to get it correctly done is > somewhere between slim to none :-) Well, 2.6.34 is out, so the plan was rather to work on 2.6.34 than on 2.6.32 if I have time to spend on this. However, the intrusive part of the I-pipe patch is rather the FCSE patch, and this one exists for 2.6.32, see branch fcse-2.6.32: http://git.xenomai.org/?p=ipipe-gch.git;a=summary -- Gilles.