From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4C039201.3060509@domain.hid> Date: Mon, 31 May 2010 12:40:01 +0200 From: Albert Veli MIME-Version: 1.0 References: <4C036DF6.8020201@domain.hid> <4C0381BF.80002@domain.hid> In-Reply-To: <4C0381BF.80002@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Subject: Re: [Xenomai-help] 2.6.32 patch for arm? List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org Thanks for the answer! I will give it another try using the patch from fcse-2.6.32 and the ipipe stuff from 2.6.33 (or maybe 2.6.31). /Albert On 05/31/2010 11:30 AM, Gilles Chanteperdrix wrote: > Albert Veli wrote: > =20 >> Dear xenomai-help list, >> >> I am looking at the ipipe patch for a custom arm-board. The linux kern= el >> version is 2.6.32.x (currently 2.6.32.14). It was chosen because it is= >> defined to be a "long-term" stable release and we do not plan on >> changing the minor version very often. >> >> Now the problem is that ipipe patches for 2.6.32.x are only available >> for x86 and ppc. For arm I can only find 2.6.30.x, 2.6.31.x and 2.6.33= =2Ex >> but not 2.6.32.x. >> >> Are there any plans for creating an ipipe arm-patch for 2.6.32.x? I ha= ve >> tried to port the 2.6.33 patch back to 2.6.32 but it is a pretty >> intrusive patch and the chance for me to get it correctly done is >> somewhere between slim to none :-) >> =20 > Well, 2.6.34 is out, so the plan was rather to work on 2.6.34 than on > 2.6.32 if I have time to spend on this. However, the intrusive part of > the I-pipe patch is rather the FCSE patch, and this one exists for > 2.6.32, see branch fcse-2.6.32: > http://git.xenomai.org/?p=3Dipipe-gch.git;a=3Dsummary > > =20