From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maurus Cuelenaere Subject: Re: [PATCH 1/6] USB: s3c_hsotg: Add support for external USB clock Date: Tue, 01 Jun 2010 23:40:50 +0200 Message-ID: <4C057E62.2030808@gmail.com> References: <1274762213-3404-1-git-send-email-ben-linux@fluff.org> <1274762213-3404-2-git-send-email-ben-linux@fluff.org> <20100601204142.GC2435@kroah.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from ey-out-2122.google.com ([74.125.78.26]:4462 "EHLO ey-out-2122.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754812Ab0FAVky (ORCPT ); Tue, 1 Jun 2010 17:40:54 -0400 In-Reply-To: <20100601204142.GC2435@kroah.com> Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: Greg KH Cc: Ben Dooks , linux-samsung-soc@vger.kernel.org, linux-usb@vger.kernel.org Op 01-06-10 22:41, Greg KH schreef: > On Tue, May 25, 2010 at 05:36:48AM +0100, Ben Dooks wrote: > >> From: Maurus Cuelenaere >> >> The PLL that drives the USB clock supports 3 input clocks: 12, 24 and 48Mhz. >> This patch adds support to the USB driver for setting the correct register bit >> according to the given clock. >> >> This depends on the following patch: >> [PATCH] ARM: S3C64XX: Add USB external clock definition >> > Care to take this through the arm tree then? > > thanks, > > greg k-h > If I'm not mistaken, this patch is already in Ben's tree (the USB_GADGET_DUALSPEED one too) -- Maurus Cuelenaere