All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian King <brking@linux.vnet.ibm.com>
To: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@suse.de>,
	linux-scsi <linux-scsi@vger.kernel.org>
Subject: Re: [PATCH 1/1] ipr: add endian swap enablement for 64 bit adapters
Date: Fri, 04 Jun 2010 13:35:48 -0500	[thread overview]
Message-ID: <4C094784.5000304@linux.vnet.ibm.com> (raw)
In-Reply-To: <4C09375A.4050304@linux.vnet.ibm.com>

Acked-by: Brian King <brking@linux.vnet.ibm.com>

On 06/04/2010 12:26 PM, Wayne Boyer wrote:
> A change in the hardware design of the chip for the new adapters changes the
> default endianness of MMIO operations.  This patch adds a register definition
> which when written to with a predefined value will change the endianness
> back to what the driver expects.
> 
> This patch also fixes two problems found during testing.
> 
> First, the first reserved field in the ipr_hostrcb64_fabirc_desc structure only
> reserved one byte.  The correct amount to reserve is 2 bytes.
> 
> Second, the reserved field of the ipr_hostrcb64_error structure only reserved
> 2 bytes.  The correct amount to reserve is 16 bytes.
> 
> Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
> ---
> 
>  drivers/scsi/ipr.c |   19 +++++++++++++++++--
>  drivers/scsi/ipr.h |    9 +++++++--
>  2 files changed, 24 insertions(+), 4 deletions(-)
> 
> Index: b/drivers/scsi/ipr.c
> ===================================================================
> --- a/drivers/scsi/ipr.c	2010-06-03 15:31:59.000000000 -0700
> +++ b/drivers/scsi/ipr.c	2010-06-03 15:48:52.000000000 -0700
> @@ -167,7 +167,8 @@ static const struct ipr_chip_cfg_t ipr_c
>  			.clr_uproc_interrupt_reg32 = 0x0002C,
>  			.init_feedback_reg = 0x0005C,
>  			.dump_addr_reg = 0x00064,
> -			.dump_data_reg = 0x00068
> +			.dump_data_reg = 0x00068,
> +			.endian_swap_reg = 0x00084
>  		}
>  	},
>  };
> @@ -7205,6 +7206,12 @@ static int ipr_reset_enable_ioa(struct i
>  	ipr_init_ioa_mem(ioa_cfg);
> 
>  	ioa_cfg->allow_interrupts = 1;
> +	if (ioa_cfg->sis64) {
> +		/* Set the adapter to the correct endian mode. */
> +		writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
> +		int_reg = readl(ioa_cfg->regs.endian_swap_reg);
> +	}
> +
>  	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
> 
>  	if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
> @@ -7362,6 +7369,7 @@ static void ipr_get_unit_check_buffer(st
>  static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
>  {
>  	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
> +	volatile u32 int_reg;
>  	int rc;
> 
>  	ENTER;
> @@ -7380,6 +7388,12 @@ static int ipr_reset_restore_cfg_space(s
> 
>  	ipr_fail_all_ops(ioa_cfg);
> 
> +	if (ioa_cfg->sis64) {
> +		/* Set the adapter to the correct endian mode. */
> +		writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
> +		int_reg = readl(ioa_cfg->regs.endian_swap_reg);
> +	}
> +
>  	if (ioa_cfg->ioa_unit_checked) {
>  		ioa_cfg->ioa_unit_checked = 0;
>  		ipr_get_unit_check_buffer(ioa_cfg);
> @@ -7544,7 +7558,7 @@ static int ipr_reset_wait_to_start_bist(
>  }
> 
>  /**
> - * ipr_reset_alert_part2 - Alert the adapter of a pending reset
> + * ipr_reset_alert - Alert the adapter of a pending reset
>   * @ipr_cmd:	ipr command struct
>   *
>   * Description: This function alerts the adapter that it will be reset.
> @@ -8315,6 +8329,7 @@ static void __devinit ipr_init_ioa_cfg(s
>  		t->init_feedback_reg = base + p->init_feedback_reg;
>  		t->dump_addr_reg = base + p->dump_addr_reg;
>  		t->dump_data_reg = base + p->dump_data_reg;
> +		t->endian_swap_reg = base + p->endian_swap_reg;
>  	}
>  }
> 
> Index: b/drivers/scsi/ipr.h
> ===================================================================
> --- a/drivers/scsi/ipr.h	2010-06-03 15:41:13.000000000 -0700
> +++ b/drivers/scsi/ipr.h	2010-06-03 15:48:52.000000000 -0700
> @@ -996,7 +996,7 @@ struct ipr_hostrcb64_fabric_desc {
>  	__be16 length;
>  	u8 descriptor_id;
> 
> -	u8 reserved;
> +	u8 reserved[2];
>  	u8 path_state;
> 
>  	u8 reserved2[2];
> @@ -1054,7 +1054,7 @@ struct ipr_hostrcb64_error {
>  	__be64 fd_lun;
>  	u8 fd_res_path[8];
>  	__be64 time_stamp;
> -	u8 reserved[2];
> +	u8 reserved[16];
>  	union {
>  		struct ipr_hostrcb_type_ff_error type_ff_error;
>  		struct ipr_hostrcb_type_12_error type_12_error;
> @@ -1254,6 +1254,9 @@ struct ipr_interrupt_offsets {
> 
>  	unsigned long dump_addr_reg;
>  	unsigned long dump_data_reg;
> +
> +#define IPR_ENDIAN_SWAP_KEY		0x000C0C00
> +	unsigned long endian_swap_reg;
>  };
> 
>  struct ipr_interrupts {
> @@ -1279,6 +1282,8 @@ struct ipr_interrupts {
> 
>  	void __iomem *dump_addr_reg;
>  	void __iomem *dump_data_reg;
> +
> +	void __iomem *endian_swap_reg;
>  };
> 
>  struct ipr_chip_cfg_t {
> 


-- 
Brian King
Linux on Power Virtualization
IBM Linux Technology Center



      reply	other threads:[~2010-06-04 18:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20100604155641.160590652@linux.vnet.ibm.com>
2010-06-04 17:26 ` [PATCH 1/1] ipr: add endian swap enablement for 64 bit adapters Wayne Boyer
2010-06-04 18:35   ` Brian King [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C094784.5000304@linux.vnet.ibm.com \
    --to=brking@linux.vnet.ibm.com \
    --cc=James.Bottomley@suse.de \
    --cc=linux-scsi@vger.kernel.org \
    --cc=wayneb@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.