[V3 3/7] mx51/iomux: fix some pad names and make some cleanups

[jason77.wang@gmail.com (jason)]

Amit Kucheria wrote:
> On 10 Jun 04, Jason Wang wrote:
>   
>> Fix some pad names according to the naming convention and make some
>> cleanups for vertical lineup.
>>
>> Signed-off-by: Jason Wang <jason77.wang@gmail.com>
>> ---
>>  arch/arm/plat-mxc/include/mach/iomux-mx51.h |  507 ++++++++++++--------------
>>  1 files changed, 234 insertions(+), 273 deletions(-)
>>
>> diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
>> index ab0f95d..df9ecdf 100644
>> --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
>> +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
>> @@ -57,278 +57,239 @@ typedef enum iomux_config {
>>  
>>  /*						PAD      MUX   ALT INPSE PATH PADCTRL */
>>  
>> -#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
>> -#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
>>     
> <snip> 
>
> Did you try compiling this? It fails to compile both babbage and 3ds boards.
>
> This breaks the babbage board because a pad name was changed here. (An
> underscore between GPIO and 1)
>
> arch/arm/mach-mx5/board-mx51_babbage.c:81: error:
> 'MX51_PAD_GPIO_1_7__GPIO1_7' undeclared here (not in a function)
> arch/arm/mach-mx5/board-mx51_babbage.c: In function 'initialize_otg_port':
>
> For 3ds, the errors are:
> arch/arm/mach-mx5/board-mx51_3ds.c:44: error: 'MX51_PAD_UART3_RXD__UART3_RXD'
> undeclared here (not in a function)
> arch/arm/mach-mx5/board-mx51_3ds.c:45: error: 'MX51_PAD_UART3_TXD__UART3_TXD'
> undeclared here (not in a function)
> arch/arm/mach-mx5/board-mx51_3ds.c:50: error: 'MX51_PAD_GPIO_1_6__GPIO1_6'
> undeclared here (not in a function)
>
> Perhaps you should wait till Sascha pulls in either of our patches to fixup
> the padnames first.
>
>   
Sorry, this is because just before i send V3, i make some changes for 
iomux-mx51.h in a hurry
and didn't make building test after change this part.
Take your advice.

Thanks,
Jason.
> Cheers,
> Amit
>