From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from dd16922.kasserver.com ([85.13.137.202]:34612 "EHLO dd16922.kasserver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751036Ab0FHEZv (ORCPT ); Tue, 8 Jun 2010 00:25:51 -0400 Message-ID: <4C0DC655.8040204@helmutauer.de> Date: Tue, 08 Jun 2010 06:25:57 +0200 From: Helmut Auer MIME-Version: 1.0 To: Jarod Wilson CC: linux-media@vger.kernel.org Subject: Re: v4l-dvb - Is it still usable for a distribution ? References: <20100607112744.7B3B010FC20F@dd16922.kasserver.com> <4C0CF124.4010103@redhat.com> <4C0D63AF.7090203@helmutauer.de> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hello >> Is your imon driver fully compatible with the lirc_imon in the display part ? > > Yes, works perfectly fine with the exact same lcdproc setup here -- > both vfd and lcd tested. > fine - I will give it a try ! >> It would be very helpful to add a parameter for disabling the IR Part, I have many users which >> are using only the display part. > > Hm. I was going to suggest that if people aren't using the receiver, > there should be no need to disable IR, but I guess someone might want > to use an mce remote w/an mce receiver, and that would have > interesting results if they had one of the imon IR receivers > programmed for mce mode. > Thats what I meant :) > I'll keep it in mind for the next time I'm > poking at the imon code in depth. Maybe you can use the already available ir_protocol parameter. -- Helmut Auer, helmut@helmutauer.de