From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Fischer Date: Tue, 15 Jun 2010 19:52:10 +0000 Subject: Re: [lm-sensors] Getting sensor information from HP ProLiant DL360 Message-Id: <4C17D9EA.7030303@fischer.name> List-Id: References: <4C178641.2050903@fischer.name> In-Reply-To: <4C178641.2050903@fischer.name> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hi, On 15.06.2010 18:59, Juerg Haefliger wrote: > For HP servers, use the hplog tool that is part of the hp-health > package which you can get from hp.com. Great tip, wasn't aware of that! After some try and error I came across http://downloads.linux.hp.com/SDR/getting_started.html , downloaded http://downloads.linux.hp.com/SDR/downloads/bootstrap.sh (had to install lbs-version to get it running), it installed the additional sources.list files and I was able to install the packages hp-health and hp-snmp-agents. thank you very much! - Markus _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors