All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthieu CASTET <matthieu.castet@parrot.com>
To: linux-mmc@vger.kernel.org
Subject: sdhci : reduce irq off latency
Date: Thu, 17 Jun 2010 11:07:15 +0200	[thread overview]
Message-ID: <4C19E5C3.2080700@parrot.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 610 bytes --]

sdhci code got tasklets (sdhci_tasklet_card and sdhci_tasklet_finish),
that does :
{
spin_lock_irqsave

if (cond) {
sdhci_reset
sdhci_reset
}

spin_unlock_irqrestore
}

sdhci_reset {
...
while (read_reg) {
if (timeout == 0)
    break;
timeout--;
mdelay(1);
}
...
}


The problem is that sdhci_reset [1] does busy pooling (with a 
granularity of 1 ms) on a register up to a timeout of 100 ms.

With the current code, we got irq off during 2*1ms. With the attached 
patch we reduce irq off to 30 us.

Note that worst case 100 ms irq off still exist.

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>


[-- Attachment #2: sdhci.diff --]
[-- Type: text/x-diff, Size: 2310 bytes --]

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c6d1bd8..03d6bde 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -157,18 +157,17 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
 		host->clock = 0;
 
 	/* Wait max 100 ms */
-	timeout = 100;
+	timeout = jiffies + msecs_to_jiffies(100);
 
 	/* hw clears the bit when it's done */
 	while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
-		if (timeout == 0) {
+		if (time_is_before_jiffies(timeout)) {
 			printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
 				mmc_hostname(host->mmc), (int)mask);
 			sdhci_dumpregs(host);
 			return;
 		}
-		timeout--;
-		mdelay(1);
+		cpu_relax();
 	}
 
 	if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
@@ -882,7 +881,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	WARN_ON(host->cmd);
 
 	/* Wait max 10 ms */
-	timeout = 10;
+	timeout = jiffies + msecs_to_jiffies(10);
 
 	mask = SDHCI_CMD_INHIBIT;
 	if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
@@ -894,7 +893,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		mask &= ~SDHCI_DATA_INHIBIT;
 
 	while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
-		if (timeout == 0) {
+		if (time_is_before_jiffies(timeout)) {
 			printk(KERN_ERR "%s: Controller never released "
 				"inhibit bit(s).\n", mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
@@ -902,8 +901,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 			tasklet_schedule(&host->finish_tasklet);
 			return;
 		}
-		timeout--;
-		mdelay(1);
+		cpu_relax();
 	}
 
 	mod_timer(&host->timer, jiffies + 10 * HZ);
@@ -1007,17 +1005,16 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 
 	/* Wait max 20 ms */
-	timeout = 20;
+	timeout = jiffies + msecs_to_jiffies(20)
 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
 		& SDHCI_CLOCK_INT_STABLE)) {
-		if (timeout == 0) {
+		if (time_is_before_jiffies(timeout)) {
 			printk(KERN_ERR "%s: Internal clock never "
 				"stabilised.\n", mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
 			return;
 		}
-		timeout--;
-		mdelay(1);
+		cpu_relax();
 	}
 
 	clk |= SDHCI_CLOCK_CARD_EN;

             reply	other threads:[~2010-06-17  9:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-06-17  9:07 Matthieu CASTET [this message]
2010-06-18  0:16 ` sdhci : reduce irq off latency Kyungmin Park
2010-06-18  7:57   ` Matthieu CASTET
2010-06-18  8:26     ` Kyungmin Park
2010-08-28  2:23 ` Chris Ball
2010-08-30  9:40   ` Matthieu CASTET

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C19E5C3.2080700@parrot.com \
    --to=matthieu.castet@parrot.com \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.