From: Felix Radensky <felix@embedded-sol.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] TOT u-boot makes P1020RDB unbootable
Date: Mon, 21 Jun 2010 13:19:23 +0300 [thread overview]
Message-ID: <4C1F3CAB.5080500@embedded-sol.com> (raw)
Hi,
I've tried to flash TOT u-boot complied with ELDK 4.2 for P1020_config into
my P1020RDB RevD and bricked it. The same u-boot boots fine on P2020RDB
revC.
I don't have BDI3000 at the moment to debug the problem. It would be
great to fix it
before the release.
Below is u-boot output from P1020RDB running with u-boot-2009.11 from
FSL BSP
U-Boot 2009.11-00001-g4458602-dirty (Feb 27 2010 - 11:13:42)
CPU0: P1020E, Version: 1.0, (0x80ec0010)
Core: E500, Version: 5.0, (0x80212050)
Clock Configuration:
CPU0:800 MHz, CPU1:800 MHz,
CCB:400 MHz,
DDR:333.333 MHz (666.667 MT/s data rate) (Asynchronous), LBC:25 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
Board: P1020RDB RevD
I2C: ready
SPI: ready
DRAM: Configuring DDR for 666.667 MT/s data rate
DDR: 512 MB
NOR Flash Bank : Primary
SD/MMC : 4-bit Mode
eSPI : Enabled
FLASH: 16 MB
L2: 256 KB enabled
NAND: 32 MiB
MMC: FSL_ESDHC: 0
EEPROM: Read failed.
eTSEC2 is in sgmii mode.
PCIE2 connected to Slot 1 as Root Complex (base addr ffe09000)
PCIE2 on bus 00 - 01
PCIE1 connected to Slot 2 as Root Complex (base addr ffe0a000)
PCIE1 on bus 02 - 02
In: serial
Out: serial
Err: serial
Net: uploading VSC7385 microcode from ef000000
eTSEC1: No support for PHY id ffffffff; assuming generic
eTSEC1, eTSEC2, eTSEC3
Thanks.
Felix.
next reply other threads:[~2010-06-21 10:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-21 10:19 Felix Radensky [this message]
2010-06-21 10:35 ` [U-Boot] TOT u-boot makes P1020RDB unbootable Aggrwal Poonam-B10812
2010-06-21 10:54 ` Wolfgang Denk
2010-06-22 5:21 ` Aggrwal Poonam-B10812
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C1F3CAB.5080500@embedded-sol.com \
--to=felix@embedded-sol.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.