From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <4C2DDE19.4050901@domain.hid>
Date: Fri, 02 Jul 2010 14:39:53 +0200
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <22150A2C94CC924695BE248F94CD11F2CD0F@EXDB4.ug.kth.se>	<4C2A518F.8030302@domain.hid>	<22150A2C94CC924695BE248F94CD11F2CDC2@domain.hid>	<4C2B0043.1070108@domain.hid>	<AANLkTikdRdEXJd97HKlWzUmon8bu94n-ATNozWyOmTOu@domain.hid>	<22150A2C94CC924695BE248F94CD11F2D063@domain.hid>	<AANLkTinqA_l4Jersd-1EfCMecqal2ZkSepe5DhtQAEJ3@domain.hid>	<4C2D9FF0.3030502@domain.hid>
	<AANLkTimVmtZIfQUWqmUhV2wygzMETn6sfBAy-ggnSpeS@mail.gmail.com>
In-Reply-To: <AANLkTimVmtZIfQUWqmUhV2wygzMETn6sfBAy-ggnSpeS@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable
Subject: Re: [Xenomai-help] Xenomai and Gumstix Overo
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: =?UTF-8?B?RmVsaXBlIEJyYW5kw6NvIENhdmFsY2FudGk=?= <cavalkaf@domain.hid>
Cc: "xenomai@xenomai.org" <xenomai@xenomai.org>

Felipe Brand=C3=A3o Cavalcanti wrote:
> 2010/7/2 Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org
> <mailto:gilles.chanteperdrix@xenomai.org>>
>=20
>     Felipe Brand=C3=A3o Cavalcanti wrote:
>     > Sorry for the late reply.
>     >
>     > Anyway, I did enable Xenomai in the kernel itself, so no modules
>     > involved - can't modprobe anything.
>     >
>     > As for the vanilla kernel, I've tried for a while to get it worki=
ng
>     > right on my board, but no luck. I am not sure if it has support t=
o all
>     > the peripherals, or if there is something that I am doing wrong (=
used
>     > the defconfig, no modifications).
>     >
>     > I've edited the bitbake files for the kernel, but what I usually =
do is
>     > to run the unpack script, replace the flush.c file, and keep the
>     process
>     > going. The defconfig is pretty much standard, except that I've en=
abled
>     > several debugging options and got rid of a few troublesome pieces=
 of
>     > code (power management, CPU Freq. scaling, etc...). As for the ed=
its,
>     > they seem very similar to yours, but I didn't look at them very
>     carefully.
>     >
>     > Fredrik, did you managed to get a kernel compiled at all?
>=20
>     What about the EABI?
>=20
>=20
> EABI is disabled in both the kernel-space and the user-space portion.
> Will try with it later, just to be sure.

Are you sure your toolchain is not an EABI toolchain? Most recent
toolchains are.

--=20
					    Gilles.