From: "Michael Büsch" <mb@bu3sch.de>
To: b43-dev@lists.infradead.org
Subject: [PATCH] b43-fwcutter: add firmware 508.1084
Date: Sun, 04 Jul 2010 15:07:11 +0200 [thread overview]
Message-ID: <4C30877F.3030808@bu3sch.de> (raw)
In-Reply-To: <1278248157-23394-1-git-send-email-hauke@hauke-m.de> (sfid-20100704_145615_766041_36FBC613)
On 07/04/2010 02:55 PM, Hauke Mehrtens wrote:
> Signed-off-by: Hauke Mehrtens<hauke@hauke-m.de>
> ---
Could you write a _few_ more lines on where this firmware is from, how
you generated the table and why one would want to use this firmware
instead of some other version?
> fwcutter/fwcutter_list.h | 73 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 73 insertions(+), 0 deletions(-)
>
> diff --git a/fwcutter/fwcutter_list.h b/fwcutter/fwcutter_list.h
> index 5175bbd..2edf799 100644
> --- a/fwcutter/fwcutter_list.h
> +++ b/fwcutter/fwcutter_list.h
> @@ -340,6 +340,70 @@ static struct extract _bb8537e3204a1ea5903fe3e66b5e2763[] =
> EXTRACT_LIST_END
> };
>
> +static struct extract _339895eadf0ef3cebe337d060ce9b30c[] =
> +{
> + /* ucode major version at offset 0xa5c00 */
> + /* ucode minor version at offset 0xa5c04 */
> + /* { .name = "ucode4", .offset = 0xB6B68, .type = EXT_UCODE_1, .length = 0x4E80 }, */
> + /* { .name = "pcm4", .offset = 0x124AEC, .type = EXT_PCM, .length = 0x520 }, */
> + /* { .name = "b0g0initvals4", .offset = 0xA5C08, .type = EXT_IV, .length = 0xE70 }, */
> + /* { .name = "a0g0bsinitvals4", .offset = 0xA7930, .type = EXT_IV, .length = 0x30 }, */
> + /* { .name = "b0g0bsinitvals4", .offset = 0xA6A80, .type = EXT_IV, .length = 0x30 }, */
> + /* { .name = "a0g0initvals4", .offset = 0xA6AB8, .type = EXT_IV, .length = 0xE70 }, */
> + { .name = "ucode19", .offset = 0x1114BC, .type = EXT_UCODE_3, .length = 0x9998 },
> + { .name = "lp0initvals14", .offset = 0xAFAC8, .type = EXT_IV, .length = 0xB20 },
> + { .name = "ucode16_lp", .offset = 0xE46F4, .type = EXT_UCODE_3, .length = 0x9D90 },
> + { .name = "ucode16_sslpn", .offset = 0xEE488, .type = EXT_UCODE_3, .length = 0x8936 },
> + { .name = "lp0bsinitvals14", .offset = 0xB05F0, .type = EXT_IV, .length = 0x118 },
> + { .name = "b0g0initvals9", .offset = 0xA9AF8, .type = EXT_IV, .length = 0xAE0 },
> + { .name = "sslpn2bsinitvals17", .offset = 0xB4DE8, .type = EXT_IV, .length = 0x118 },
> + { .name = "a0g1bsinitvals9", .offset = 0xABDF0, .type = EXT_IV, .length = 0x118 },
> + { .name = "b0g0bsinitvals13", .offset = 0xAED00, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode16_sslpn_nobt", .offset = 0xF6DC4, .type = EXT_UCODE_3, .length = 0x7413 },
> + { .name = "b0g0bsinitvals5", .offset = 0xA8378, .type = EXT_IV, .length = 0x118 },
> + { .name = "sslpn2initvals17", .offset = 0xB4120, .type = EXT_IV, .length = 0xCC0 },
> + { .name = "b0g0initvals13", .offset = 0xAE178, .type = EXT_IV, .length = 0xB80 },
> + { .name = "ucode17", .offset = 0x107C50, .type = EXT_UCODE_3, .length = 0x9868 },
> + { .name = "sslpn1bsinitvals20", .offset = 0xB6A48, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode14", .offset = 0xD5964, .type = EXT_UCODE_2, .length = 0x64A0 },
> + { .name = "a0g0initvals5", .offset = 0xA8498, .type = EXT_IV, .length = 0xA08 },
> + { .name = "lp0bsinitvals16", .offset = 0xB4000, .type = EXT_IV, .length = 0x118 },
> + { .name = "a0g1bsinitvals5", .offset = 0xA99D8, .type = EXT_IV, .length = 0x118 },
> + { .name = "n0bsinitvals11", .offset = 0xACA90, .type = EXT_IV, .length = 0x118 },
> + { .name = "n0absinitvals11", .offset = 0xACBB0, .type = EXT_IV, .length = 0x118 },
> + { .name = "a0g1bsinitvals13", .offset = 0xAF9A8, .type = EXT_IV, .length = 0x118 },
> + { .name = "pcm5", .offset = 0x125010, .type = EXT_PCM, .length = 0x520 },
> + { .name = "ucode9", .offset = 0xC1100, .type = EXT_UCODE_2, .length = 0x6268 },
> + { .name = "a0g0bsinitvals9", .offset = 0xABCD0, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode20", .offset = 0x11AE58, .type = EXT_UCODE_3, .length = 0x9C90 },
> + { .name = "a0g1initvals5", .offset = 0xA8EA8, .type = EXT_IV, .length = 0xA08 },
> + { .name = "n0bsinitvals16", .offset = 0xB22D0, .type = EXT_IV, .length = 0x118 },
> + { .name = "lp0initvals15", .offset = 0xB0710, .type = EXT_IV, .length = 0xD20 },
> + { .name = "b0g0initvals5", .offset = 0xA7968, .type = EXT_IV, .length = 0xA08 },
> + { .name = "sslpn0initvals16", .offset = 0xB23F0, .type = EXT_IV, .length = 0xD70 },
> + { .name = "a0g1initvals13", .offset = 0xAEE20, .type = EXT_IV, .length = 0xB80 },
> + { .name = "sslpn2initvals19", .offset = 0xB4F08, .type = EXT_IV, .length = 0xCB0 },
> + { .name = "a0g1initvals9", .offset = 0xAB1E8, .type = EXT_IV, .length = 0xAE0 },
> + { .name = "ucode5", .offset = 0xBB9EC, .type = EXT_UCODE_2, .length = 0x5710 },
> + { .name = "lp0bsinitvals13", .offset = 0xAE058, .type = EXT_IV, .length = 0x118 },
> + { .name = "n0initvals16", .offset = 0xB1558, .type = EXT_IV, .length = 0xD70 },
> + { .name = "b0g0bsinitvals9", .offset = 0xAA5E0, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode11", .offset = 0xC736C, .type = EXT_UCODE_2, .length = 0x74A8 },
> + { .name = "lp0initvals16", .offset = 0xB3288, .type = EXT_IV, .length = 0xD70 },
> + { .name = "ucode16_mimo", .offset = 0xFE1DC, .type = EXT_UCODE_3, .length = 0x9A70 },
> + { .name = "a0g0initvals9", .offset = 0xAA700, .type = EXT_IV, .length = 0xAE0 },
> + { .name = "lp0initvals13", .offset = 0xACCD0, .type = EXT_IV, .length = 0x1380 },
> + { .name = "a0g0bsinitvals5", .offset = 0xA98B8, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode13", .offset = 0xCE818, .type = EXT_UCODE_2, .length = 0x7148 },
> + { .name = "sslpn2bsinitvals19", .offset = 0xB5BC0, .type = EXT_IV, .length = 0x118 },
> + { .name = "ucode15", .offset = 0xDBE08, .type = EXT_UCODE_3, .length = 0x88E8 },
> + { .name = "lp0bsinitvals15", .offset = 0xB1438, .type = EXT_IV, .length = 0x118 },
> + { .name = "n0initvals11", .offset = 0xABF10, .type = EXT_IV, .length = 0xB78 },
> + { .name = "sslpn0bsinitvals16", .offset = 0xB3168, .type = EXT_IV, .length = 0x118 },
> + { .name = "sslpn1initvals20", .offset = 0xB5CE0, .type = EXT_IV, .length = 0xD60 },
> + EXTRACT_LIST_END
> +};
> +
> /*
> * Links change, so let's not put them into the README.
> * I still put them here so we know where the file was obtained.
> @@ -419,4 +483,13 @@ static const struct file files[] =
> .flags = FW_FLAG_LE | FW_FLAG_V4,
> .extract = _bb8537e3204a1ea5903fe3e66b5e2763,
> },
> + {
> + /* http://mirror2.openwrt.org/sources/broadcom-wl-5.10.56.27.0.tar.bz2 */
> + .name = "wl_prebuilt.o",
> + .id = "FW16",
> + .ucode_version = "508.1084",
> + .md5 = "339895eadf0ef3cebe337d060ce9b30c",
> + .flags = FW_FLAG_LE | FW_FLAG_V4,
> + .extract = _339895eadf0ef3cebe337d060ce9b30c,
> + },
> };
--
Greetings Michael.
prev parent reply other threads:[~2010-07-04 13:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-04 12:55 [PATCH] b43-fwcutter: add firmware 508.1084 Hauke Mehrtens
2010-07-04 13:07 ` Michael Büsch [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C30877F.3030808@bu3sch.de \
--to=mb@bu3sch.de \
--cc=b43-dev@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.