From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4C35DAE2.3050504@domain.hid> Date: Thu, 08 Jul 2010 16:04:18 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1278577080.S.5424.32919.F.H.TkdpbGxlcyBDaGFudGVwZXJkcml4AFJlOiBbWGVub21haS1oZWxwXSBUZXN0aW5nIFJUTmV0IGluIFhlbm8_.f4-234-246.old.1278596771.3702@domain.hid> In-Reply-To: <1278577080.S.5424.32919.F.H.TkdpbGxlcyBDaGFudGVwZXJkcml4AFJlOiBbWGVub21haS1oZWxwXSBUZXN0aW5nIFJUTmV0IGluIFhlbm8_.f4-234-246.old.1278596771.3702@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Testing RTNet in Xenomai List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: prakash srinivasan Cc: xenomai@xenomai.org prakash srinivasan wrote: > >>To install Xenomai, please follow the installation instructions. You >> >>will find them in the README.INSTALL file in Xenomai sources >> >>distribution, or online: >> >>http://www.xenomai.org/documentation/xenomai-2.5/README.INSTALL > > Dear Gilles, > Thanks for the info. I justed followed the document, > http://download.intel.com/design/intarch/papers/322386.pdf Coz I am also > testing in the same ARCH. I followed the steps. Everything was fine > without any issues and tested the xenomai-2.4.6 as they mentioned in the > doc. > But I have doubt that there is no modules created after it was installed > successfully in /usr/xenomai/. I just like to know whether xenomai > installation will create any "modules" folder in /usr/xenomai/ or not?. You ask me a question. I answer you: "read README.INSTALL". You tell me: "I did not read README.INSTALL", then proceed to ask your question again. Are you kidding me? -- Gilles.