From: Philip Prindeville <philipp_subx@redfish-solutions.com>
To: linux-wireless@vger.kernel.org
Subject: Re: Ath5k breaking in ath5k_pci_suspend_compat going on 2 weeks
Date: Sun, 11 Jul 2010 11:53:47 -0600 [thread overview]
Message-ID: <4C3A052B.4040602@redfish-solutions.com> (raw)
In-Reply-To: <4C395F03.40200@redfish-solutions.com>
The latest revision that I could build was 2010-06-02, and that panics
the box:
ompat-wireless backport release: compat-wireles-20100526-1-g9a89e44
Backport based on linux-next.git next-20100526
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath5k 0000:00:11.0: registered as 'phy0'
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<00000000>]
*pde = 00000000
Oops: 0000 [#1] PREEMPT
Modules linked in: ath5k(+) mac80211 ath cfg80211 rfkill_backport compat dahdi s
ha512_generic sha256_generic deflate zlib_deflate arc4 ecb sha1_generic blowfish
des_generic cbc cryptosoft cryptodev(P) ocf(P) geodewdt geode_rng geode_aes cry
pto_blkcipher via_rhine rtc cs5535_gpio
Pid: 1438, comm: modprobe Tainted: P (2.6.27.48-astlinux #1)
EIP: 0060:[<00000000>] EFLAGS: 00010286 CPU: 0
EIP is at 0x0
EAX: cea68000 EBX: cf9b3490 ECX: 00000000 EDX: 00000000
ESI: cea68154 EDI: cea83be0 EBP: cea68000 ESP: cea87cec
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process modprobe (pid: 1438, ti=cea86000 task=cf994460 task.ti=cea86000)
Stack: c0259ceb cf9b3400 cea87cf4 cea87cf4 00000000 00000000 00000000 00000000
00000000 00000000 00000000 000005dc cea68000 cea83be0 ffffffff 00000010
c025a0e2 00000000 00000000 ffffffff 00000000 c034e8cc ffffffff 00000000
Call Trace:
[<c0259ceb>] rtnl_fill_ifinfo+0x2a8/0x45e
[<c025a0e2>] rtmsg_ifinfo+0x40/0xa7
[<c025a17e>] rtnetlink_event+0x35/0x38
[<c02aa0ab>] notifier_call_chain+0x2a/0x47
[<c012716e>] raw_notifier_call_chain+0x9/0xc
[<c0252ee8>] register_netdevice+0x228/0x25d
[<d09449d3>] ieee80211_if_add+0x60e/0x704 [mac80211]
[<c015fff4>] alloc_inode+0xda/0x150
[<c01b8bd8>] debugfs_mknod+0x10d/0x119
[<c0115cfb>] printk+0x14/0x18
[<d09453eb>] ieee80211_init_rate_ctrl_alg+0x18b/0x1b4 [mac80211]
[<d093992a>] ieee80211_register_hw+0x28c/0x320 [mac80211]
[<d08c6742>] ath5k_pci_probe+0xb03/0xde2 [ath5k]
[<c01da23c>] pci_device_probe+0x36/0x55
[<c01f7f8b>] driver_probe_device+0x9c/0x112
[<c01f8038>] __driver_attach+0x37/0x55
[<c01f7911>] bus_for_each_dev+0x31/0x52
[<c01f7e3f>] driver_attach+0x11/0x13
[<c01f8001>] __driver_attach+0x0/0x55
[<c01f7c5d>] bus_add_driver+0x91/0x194
[<d086e000>] init_ath5k_pci+0x0/0x2f [ath5k]
[<c01f8239>] driver_register+0x6d/0xc2
[<d086e000>] init_ath5k_pci+0x0/0x2f [ath5k]
[<c01da2fe>] __pci_register_driver+0x35/0x60
[<d086e01a>] init_ath5k_pci+0x1a/0x2f [ath5k]
[<c0101037>] _stext+0x37/0xfb
[<c013068d>] sys_init_module+0x87/0x176
[<c01037e6>] syscall_call+0x7/0xb
=======================
Code: Bad EIP value.
EIP: [<00000000>] 0x0 SS:ESP 0068:cea87cec
---[ end trace d08207f47ddcaa64 ]---
/etc/runlevels/default/S02wifi: line 11: 1438 Segmentation fault modprobe
$i
Configuring WiFi cards...
On 7/11/10 12:04 AM, Philip Prindeville wrote:
> I take it back... it seems to go back at least to 2010-06-12.
>
>
> On 7/10/10 8:05 PM, Philip Prindeville wrote:
>> This still seems to be broken, a couple of weeks later:
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/attach.o
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.o
>>
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.c:243:
>> error: 'ath5k_pci_suspend_compat' undeclared here (not in a function)
>> /home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.c:244:
>> error: 'ath5k_pci_resume_compat' undeclared here (not in a function)
>> make[6]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k/base.o]
>> Error 1
>> make[5]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath/ath5k]
>> Error 2
>> make[4]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless/ath]
>> Error 2
>> make[3]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-06-26/drivers/net/wireless]
>> Error 2
>>
>>
>> and from today's tarball:
>>
>>
>> CC [M]
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.o
>>
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.c:243:
>> error: 'ath5k_pci_suspend_compat' undeclared here (not in a function)
>> /home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.c:244:
>> error: 'ath5k_pci_resume_compat' undeclared here (not in a function)
>> make[6]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k/base.o]
>> Error 1
>> make[5]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath/ath5k]
>> Error 2
>> make[4]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless/ath]
>> Error 2
>> make[3]: ***
>> [/home/philipp/kernel/build_i586/compat-wireless-2010-07-10/drivers/net/wireless]
>> Error 2
>>
>>
>> Can someone please have a look and fix their regression?
>>
>> Thanks,
>>
>> -Philip
>
next prev parent reply other threads:[~2010-07-11 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-11 2:05 Ath5k breaking in ath5k_pci_suspend_compat going on 2 weeks Philip Prindeville
2010-07-11 6:04 ` Philip Prindeville
2010-07-11 17:53 ` Philip Prindeville [this message]
2010-07-12 13:43 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3A052B.4040602@redfish-solutions.com \
--to=philipp_subx@redfish-solutions.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.