[U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other than kirkwood

[Ben Warren <biggerbadderben@gmail.com>]

  On 7/11/2010 10:45 PM, Prafulla Wadaskar wrote:
>
>
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de
>> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Albert Aribaud
>> Sent: Sunday, July 11, 2010 1:32 PM
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] [PATCH V3 2/5] mv_egiga: support SoCs other
>> than kirkwood
>>
>> Rename all references to kirkwood in mv_egiga symbols
>> throughout the whole codebase.
>>
>> Signed-off-by: Albert Aribaud<albert.aribaud@free.fr>
>> ---
>>   arch/arm/cpu/arm926ejs/kirkwood/cpu.c         |    4 +-
>>   arch/arm/include/asm/arch-kirkwood/kirkwood.h |    5 +
>>   drivers/net/Makefile                          |    2 +-
>>   drivers/net/mv_egiga.c                        |  322
>> +++++++++---------
>>   drivers/net/mv_egiga.h                        |  466
>> ++++++++++++------------
>>   include/configs/guruplug.h                    |    4 +-
>>   include/configs/km_arm.h                      |    4 +-
>>   include/configs/mv88f6281gtw_ge.h             |    4 +-
>>   include/configs/openrd_base.h                 |    4 +-
>>   include/configs/rd6281a.h                     |    4 +-
>>   include/configs/sheevaplug.h                  |    4 +-
>>   include/netdev.h                              |    2 +-
>>   12 files changed, 418 insertions(+), 407 deletions(-)
>>
>> diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
>> b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
>> index 6fc3902..786ffc6 100644
>> --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
>> +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
>> @@ -378,10 +378,10 @@ int arch_misc_init(void)
>>   }
>>   #endif /* CONFIG_ARCH_MISC_INIT */
>>
>> -#ifdef CONFIG_KIRKWOOD_EGIGA
>> +#ifdef CONFIG_MV_EGIGA
>>   int cpu_eth_init(bd_t *bis)
>>   {
>> -	kirkwood_egiga_initialize(bis);
>> +	mv_egiga_initialize(bis);
>>   	return 0;
>>   }
>>   #endif
>> diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
>> b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
>> index 2470efb..9200605 100644
>> --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
>> +++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
>> @@ -60,6 +60,11 @@
>>   #define KW_EGIGA0_BASE			(KW_REGISTER(0x72000))
>>   #define KW_EGIGA1_BASE			(KW_REGISTER(0x76000))
>>
>> +#if defined (CONFIG_MV_EGIGA)
> I think you don't need ifdef here
>
>> +#define MV_EGIGA0_BASE			KW_EGIGA0_BASE
>> +#define MV_EGIGA1_BASE			KW_EGIGA1_BASE
>> +#endif
>> +
>>   #if defined (CONFIG_KW88F6281)
>>   #include<asm/arch/kw88f6281.h>
>>   #elif defined (CONFIG_KW88F6192)
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 1599c26..04f8de0 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -52,7 +52,7 @@ COBJS-$(CONFIG_MACB) += macb.o
>>   COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
>>   COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
>>   COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
>> -COBJS-$(CONFIG_KIRKWOOD_EGIGA) += mv_egiga.o
>> +COBJS-$(CONFIG_MV_EGIGA) += mv_egiga.o
>>   COBJS-$(CONFIG_NATSEMI) += natsemi.o
>>   COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
>>   COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
>> diff --git a/drivers/net/mv_egiga.c b/drivers/net/mv_egiga.c
>> index b7ecc9d..4fecf1e 100644
>> --- a/drivers/net/mv_egiga.c
>> +++ b/drivers/net/mv_egiga.c
>> @@ -35,13 +35,17 @@
>>   #include<asm/errno.h>
>>   #include<asm/types.h>
>>   #include<asm/byteorder.h>
>> +
>> +#if defined (CONFIG_KIRKWOOD)
>>   #include<asm/arch/kirkwood.h>
>> +#endif
>> +
>>   #include "mv_egiga.h"
>>
>>   DECLARE_GLOBAL_DATA_PTR;
>>
>> -#define KIRKWOOD_PHY_ADR_REQUEST 0xee
>> -#define KWGBE_SMI_REG (((struct kwgbe_registers
>> *)KW_EGIGA0_BASE)->smi)
>> +#define MV_PHY_ADR_REQUEST 0xee
>> +#define MV_EGIGA_SMI_REG (((struct mv_egiga_registers
>> *)MV_EGIGA0_BASE)->smi)
>>
>>   /*
>>    * smi_reg_read - miiphy_read callback function.
>> @@ -51,16 +55,16 @@ DECLARE_GLOBAL_DATA_PTR;
>>   static int smi_reg_read(char *devname, u8 phy_adr, u8
>> reg_ofs, u16 * data)
>>   {
>>   	struct eth_device *dev = eth_get_dev_by_name(devname);
>> -	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
>> -	struct kwgbe_registers *regs = dkwgbe->regs;
>> +	struct mv_egiga_device *dmvegiga = to_mv_egiga(dev);
>> +	struct mv_egiga_registers *regs = dmvegiga->regs;
> I suggest to keep name as mvgbe here instead of mv_egiga, 3 additional chars, increases overall code size
huh?  The name is consistent with the rest of his work, and *if* the 
code really increases in size, I can't imagine that 3 chars really 
matters...
>>   	u32 smi_reg;
>>   	u32 timeout;
>>
>>   	/* Phyadr read request */
>> -	if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST&&
>> -			reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) {
>> +	if (phy_adr == MV_PHY_ADR_REQUEST&&
>> +			reg_ofs == MV_PHY_ADR_REQUEST) {
>>   		/* */
>> -		*data = (u16) (KWGBEREG_RD(regs->phyadr)&  PHYADR_MASK);
>> +		*data = (u16) (MV_EGIGA_REG_RD(regs->phyadr)&
> Same here, pls use MVGBEREG instead of MV_EGIGA_REG, 4 extra chars
Same comment as above.  Clarity is king.
> Pls just replace kw/KW by mv/MV to avoide indentation issues
>
> I think these are the only changes in this patch (i.e. find and replace), are there any other?
>
> Regards..
> Prafulla . .
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot