From: Tom Ammon <tom.ammon-wbocuHtxKic@public.gmane.org>
To: Hal Rosenstock <hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: basic questions about partitions
Date: Mon, 12 Jul 2010 13:28:40 -0600 [thread overview]
Message-ID: <4C3B6CE8.7080800@utah.edu> (raw)
In-Reply-To: <AANLkTikmGjn3zXsAFyH3MUEk41Tt2Iz8oJYcb0b0ocUC-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
Okay, how about this.
With ethernet and a linux server, I can set up up aliases (virtual IP
addresses) and assign multiple IPs to a single NIC. Can this be done
with an HCA and IPoIB? For example, could I configure ib0:1 to be
192.168.0.1/24 and ib0:2 to be 10.0.0.1/24?
I have tried this on a RHEL5 box and it doesn't seem to want to accept
it, but I don't know if there is another piece somewhere that I need to
configure.
Tom
On 7/12/2010 1:06 PM, Hal Rosenstock wrote:
> On Mon, Jul 12, 2010 at 3:03 PM, Hal Rosenstock
> <hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> Hi Tom,
>>
>> On 7/12/10, Tom Ammon<tom.ammon-wbocuHtxKic@public.gmane.org> wrote:
>>> Hi,
>>>
>>> I have some basic questions about IB partitions.
>>>
>>> Can an HCA port belong to more than 1 partition at a time?
>> Yes.
>>
>>> How do you configure partitions with opensm? From reading the opensmd
>>> man page, it looks like you just create a file called
>>> /etc/osm-partitions.conf, with port GUIDs and such, but is this current?
>> The default location depends on how OpenSM is configured/built.
> I missed this the first time around:
>
> and yes, the syntax indicated is current.
>
> -- Hal
>
>>> I ask because according to the man page the opensm configuration file is
>>> in /etc/opensm/ . Can you tell opensm where to look for the partitions file?
>> Yes, with either the -P option on the command line or
>> partition_config_file line in the options file.
>>
>> -- Hal
>>
>>> Thanks,
>>>
>>> Tom
>>>
>>> --
>>> Tom Ammon
>>> Network Engineer
>>> Office: 801.587.0976
>>> Mobile: 801.674.9273
>>>
>>> Center for High Performance Computing
>>> University of Utah
>>> http://www.chpc.utah.edu
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
>>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
--
Tom Ammon
Network Engineer
Office: 801.587.0976
Mobile: 801.674.9273
Center for High Performance Computing
University of Utah
http://www.chpc.utah.edu
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-07-12 19:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-12 18:33 basic questions about partitions Tom Ammon
[not found] ` <4C3B5FEA.1020904-wbocuHtxKic@public.gmane.org>
2010-07-12 18:53 ` Mike Heinz
2010-07-12 19:03 ` Hal Rosenstock
[not found] ` <AANLkTil-bN-x31UkuPh38HWy5hhctp2x3rlZKyCCzoha-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-12 19:06 ` Hal Rosenstock
[not found] ` <AANLkTikmGjn3zXsAFyH3MUEk41Tt2Iz8oJYcb0b0ocUC-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-12 19:28 ` Tom Ammon [this message]
[not found] ` <4C3B6CE8.7080800-wbocuHtxKic@public.gmane.org>
2010-07-12 19:53 ` Hal Rosenstock
[not found] ` <AANLkTilajOitn1UidBCWeI7njymfwOTx9rl6bHo5Rv4G-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-13 16:50 ` Tom Ammon
[not found] ` <4C3C9970.2060100-wbocuHtxKic@public.gmane.org>
2010-07-13 17:44 ` Hal Rosenstock
[not found] ` <AANLkTinqEhNWWqevmvzl8rdNtvqprc3lgWC5-8jYYq70-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-13 19:44 ` Tom Ammon
[not found] ` <4C3CC210.2000803-wbocuHtxKic@public.gmane.org>
2010-07-13 21:46 ` Hal Rosenstock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C3B6CE8.7080800@utah.edu \
--to=tom.ammon-wbocuhtxkic@public.gmane.org \
--cc=hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.