All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hamza Ferrag <hferraggreat@gmail.com>
To: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21)
Date: Thu, 15 Jul 2010 13:17:20 +0200	[thread overview]
Message-ID: <4C3EEE40.4010407@gmail.com> (raw)
In-Reply-To: <4C3CB704.1040908@ginder.xs4all.nl>

Hi Hans,

Thanks for your quick feedback.

Any other suggestions guys ? .


Thanks in advance.

Hamza Ferrag.


On 13/07/2010 20:57, Hans Houwaard wrote:
> I don't really know why, but it happens sometimes on my machine with the
> same card as well. When I have problems, I power off the computer and
> then restart it again. The card will not properly load or function
> untill I do. There is probably some hardware lock that needs to be reset
> by powering off the card.
>
> The loading of the firmware sometimes takes a couple of seconds in my
> machine, it's not very fast. Besides check if the card, which is on a
> PCI-1x slot, doesn't share an IRQ with the onboard soundcard. That will
> seriously effect the performance of both the card and the sound.
>
> Good luck,
>
> Hans
>
> Op 13-07-10 20:28, Hamza Ferrag schreef:
>> Hi all,
>>
>> I am trying to install a 'Tevii S470' card from TeVii technology as
>> described here http://linuxtv.org/wiki/index.php/TeVii_S470.
>>
>> My configuration is :
>>
>> - intel x86 platform
>> - Kernel 2.6.27-21
>> - tevii_ds3000.tar.gz (firmware archive from
>> http://tevii.com/tevii_ds3000.tar.gz ),
>> - s2-liplianin mercurial sources ( from
>> http://mercurial.intuxication.org/hg/s2-liplianin)last changes at
>> 05/29/2010,
>>
>> All work fine i.e drivers/firmware installation after madprobe a right
>> modules.
>>
>> # lsmod
>> Module Size Used by Not tainted
>> cx23885 82416 0
>> tveeprom 9348 1 cx23885
>> btcx_risc 1928 1 cx23885
>> cx2341x 7748 1 cx23885
>> ir_common 23936 1 cx23885
>> videobuf_dma_sg 5060 1 cx23885
>> ir_core 3596 2 cx23885,ir_common
>> v4l2_common 8896 2 cx23885,cx2341x
>> videodev 25376 2 cx23885,v4l2_common
>> videobuf_dvb 2820 1 cx23885
>> videobuf_core 8388 3 cx23885,videobuf_dma_sg,videobuf_dvb
>> lnbp21 1024 0
>> dvb_core 54832 2 cx23885,videobuf_dvb
>> ds3000 9668 1
>>
>>
>> # dmesg
>> Linux video capture interface: v2.00
>> cx23885 driver version 0.0.2 loaded
>> CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470
>> [card=15,autodetected]
>> cx23885_dvb_register() allocating 1 frontend(s)
>> cx23885[0]: cx23885 based dvb card
>> DS3000 chip version: 0.192 attached.
>> DVB: registering new adapter (cx23885[0])
>> DVB: registering adapter 0 frontend 0 (Montage Technology
>> DS3000/TS2020)...
>> cx23885_dev_checkrevision() Hardware revision = 0xb0
>> cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 11, latency: 0,
>> mmio: 0xdf800000
>> cx23885 0000:03:00.0: setting latency timer to 64
>> tun: Universal TUN/TAP device driver, 1.6
>>
>>
>>
>> A problem appear when tunning card using szap-s2 :
>>
>> # szap-s2 szap-s2 -c /root/channels.conf -x -M 5 -C 89 -l 9750 -S 1 MyCh
>>
>> reading channels from file '/root/channels.conf'
>> zapping to 1 'MyCh':
>> delivery DVB-S2, modulation 8PSK
>> sat 0, frequency 8420 MHz V, symbolrate 29400000, coderate 8/9,rolloff
>> 0.35
>> vpid 0x0286, apid 0x1fff, sid 0x0000
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> ds3000_firmware_ondemand: Waiting for firmware upload
>> (dvb-fe-ds3000.fw)...
>> firmware: requesting dvb-fe-ds3000.fw
>> ds3000_firmware_ondemand: Waiting for firmware upload(2)...
>> ds3000_firmware_ondemand: No firmware uploaded (timeout or file not
>> found?)
>> ds3000_tune: Unable initialise the firmware
>>
>> Apparently it can't locate a firmware file, yet :
>>
>> # ls -l /lib/firmware/
>> -rwxr-xr-x 1 root root 8192 May 3 07:09 dvb-fe-ds3000.fw
>>
>>
>> Any ideas why this happens?
>>
>> Thanks and best regards,
>>
>> Hamza Ferrag
>>
>>
>> _______________________________________________
>> linux-dvb users mailing list
>> For V4L/DVB development, please use instead linux-media@vger.kernel.org
>> linux-dvb@linuxtv.org
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>


      parent reply	other threads:[~2010-07-15 11:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-13 18:28 [linux-dvb] TeVii S470 Tunning Issue (Kernel 2.6.27-21) Hamza Ferrag
2010-07-13 18:57 ` Hans Houwaard
2010-07-14 12:34   ` ferrag hamza
2010-07-14 12:36     ` ferrag hamza
2010-09-03  8:42       ` TeVii S470 periodically fails to tune/lock - needs poweroff O&M Ugarcina
2010-09-03  8:46         ` [linux-dvb] TeVii S470 periodically fails to tune/lock - needspoweroff Karsten Siebert
2010-09-08  2:03           ` OM Ugarcina
2010-07-15 11:17   ` Hamza Ferrag [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C3EEE40.4010407@gmail.com \
    --to=hferraggreat@gmail.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.