All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yusuke Goda <yusuke.goda.sx@renesas.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH] drivers/mfd/sh_mobile_sdhi.c: uses optimized block
Date: Tue, 20 Jul 2010 06:32:44 +0000	[thread overview]
Message-ID: <4C45430C.4060501@renesas.com> (raw)
In-Reply-To: <4C3F0433.8010005@emtrion.de>

Hi Markus

I tried the test of this patch.
However, I was not able to apply a patch.
Is this patch a patch for which kernel(commit number)?

cheers,
Goda

Markus Pietrek wrote:
> On the SH7723, these settings improve PIO reads from 4MB/s to 13MB/s and writes from 1MB/s to 4.1MB/s
> 
> Signed-off-by: Markus Pietrek <markus.pietrek@emtrion.de>
> ---
>  drivers/mfd/sh_mobile_sdhi.c |    9 +++++++++
>  drivers/mmc/host/tmio_mmc.c  |   14 ++++++++++++++
>  include/linux/mfd/tmio.h     |    9 +++++++++
>  3 files changed, 32 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c
> index cd16459..0bd80a3 100644
> --- a/drivers/mfd/sh_mobile_sdhi.c
> +++ b/drivers/mfd/sh_mobile_sdhi.c
> @@ -107,6 +107,15 @@ static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
>         mmc_data->hclk = clk_get_rate(priv->clk);
>         mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
>         mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
> +
> +       /* values are taken from the firmware based sh_sdhi.c driver */
> +       mmc_data->max_hw_segs   = 32;
> +       mmc_data->max_phys_segs = 32;
> +       mmc_data->max_blk_count = 65535; /* actually it's 65536, but the value 65536 is handled differently and we want to keep the code simple */
> +       mmc_data->max_req_size  = 131072;
> +       mmc_data->max_seg_size  = mmc_data->max_req_size;
> +       mmc_data->max_blk_size  = mmc_data->max_blk_size;
> +
>         if (p) {
>                 mmc_data->flags = p->tmio_flags;
>                 mmc_data->ocr_mask = p->tmio_ocr_mask;
> diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
> index ee7d0a5..cdb3a6a 100644
> --- a/drivers/mmc/host/tmio_mmc.c
> +++ b/drivers/mmc/host/tmio_mmc.c
> @@ -847,6 +847,20 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev)
>         mmc->caps |= pdata->capabilities;
>         mmc->f_max = pdata->hclk;
>         mmc->f_min = mmc->f_max / 512;
> +
> +       if (pdata->max_hw_segs)
> +               mmc->max_hw_segs = pdata->max_hw_segs;
> +       if (pdata->max_phys_segs)
> +               mmc->max_phys_segs = pdata->max_phys_segs;
> +       if (pdata->max_seg_size)
> +               mmc->max_seg_size = pdata->max_seg_size;
> +       if (pdata->max_req_size)
> +               mmc->max_req_size = pdata->max_req_size;
> +       if (pdata->max_blk_size)
> +               mmc->max_blk_size = pdata->max_blk_size;
> +       if (pdata->max_blk_count)
> +               mmc->max_blk_count = pdata->max_blk_count;
> +
>         if (pdata->ocr_mask)
>                 mmc->ocr_avail = pdata->ocr_mask;
>         else
> diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
> index f07425b..4eb7358 100644
> --- a/include/linux/mfd/tmio.h
> +++ b/include/linux/mfd/tmio.h
> @@ -71,6 +71,15 @@ struct tmio_mmc_data {
>         unsigned long                   capabilities;
>         unsigned long                   flags;
>         u32                             ocr_mask;       /* available voltages */
> +
> +       /* overrides for "struct mmc_host" variables */
> +       unsigned int            max_seg_size;
> +       unsigned short          max_hw_segs;
> +       unsigned short          max_phys_segs;
> +       unsigned int            max_req_size;
> +       unsigned int            max_blk_size;
> +       unsigned int            max_blk_count;
> +
>         struct tmio_mmc_dma             *dma;
>         void (*set_pwr)(struct platform_device *host, int state);
>         void (*set_clk_div)(struct platform_device *host, int state);
> --
> 1.7.0.4
> 
> 
> _____________________________________
> 
> Amtsgericht Mannheim
> HRB 110 300
> Geschäftsführer: Dieter Baur, Ramona Maurer
> _____________________________________
> 
> Important Note:
> - This e-mail may contain trade secrets or privileged, undisclosed or otherwise confidential information.
> - If you have received this e-mail in error, you are hereby notified that any review, copying or distribution of it is strictly prohibited.
> - Please inform us immediately and destroy the original transmittal.
> 
> Thank you for your cooperation.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  reply	other threads:[~2010-07-20  6:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-15 12:50 [PATCH] drivers/mfd/sh_mobile_sdhi.c: uses optimized block transfer Markus Pietrek
2010-07-20  6:32 ` Yusuke Goda [this message]
2010-07-20  7:16 ` AW: [PATCH] drivers/mfd/sh_mobile_sdhi.c: uses optimized block Pietrek, Markus
2010-07-20  8:46 ` Yusuke Goda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C45430C.4060501@renesas.com \
    --to=yusuke.goda.sx@renesas.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.