From mboxrd@z Thu Jan 1 00:00:00 1970 From: grinberg@compulab.co.il (Igor Grinberg) Date: Thu, 22 Jul 2010 08:41:57 +0300 Subject: [PATCH 0/3] Enable pxa310 usb otg port host mode In-Reply-To: References: <1279199446-30526-1-git-send-email-grinberg@compulab.co.il> Message-ID: <4C47DA25.3040202@compulab.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org > > On Thu, Jul 15, 2010 at 3:10 PM, Igor Grinberg wrote: > >> This patch series introduces the U2D Controller and >> Host driver for PXA3xx and enables cm-x300 usb host port2. >> >> This patch series depends on >> "Generic ULPI driver extention" patch series, >> which is currently sent for review to >> linux-usb at vger.kernel.org mailing list >> >> Igor Grinberg (3): >> [ARM] pxa3xx: Add U2D controller and driver >> [ARM] usb/host/ohci-pxa27x: enable OHCI over U2DC >> [ARM] pxa/cm-x300: enable USB host port2 >> >> arch/arm/mach-pxa/Kconfig | 4 + >> arch/arm/mach-pxa/Makefile | 2 +- >> arch/arm/mach-pxa/cm-x300.c | 77 ++++++ >> arch/arm/mach-pxa/devices.c | 28 ++ >> arch/arm/mach-pxa/devices.h | 1 + >> arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h | 35 +++ >> arch/arm/mach-pxa/pxa3xx-u2d.c | 392 +++++++++++++++++++++++++++ >> > Will pxa3xx-ulpi.c be a better name here? I do like pxa3xx-u2d.c to be > the driver name for the U2D controller, and be placed in drivers/usb/ > Well, the intend was to make a start for the U2D driver, so there will be facilities for comunicating with the controller. I can separate the U2D stuff from the pxa310 specific ulpi, is this what you mean? > Otherwise looks OK to me. > > >> arch/arm/mach-pxa/pxa3xx.c | 2 +- >> drivers/usb/host/ohci-pxa27x.c | 7 + >> 9 files changed, 546 insertions(+), 2 deletions(-) >> create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h >> create mode 100644 arch/arm/mach-pxa/pxa3xx-u2d.c >> >> >> > -- Regards, Igor.