[PATCH] imx: move gpio init after to irq init

[eric@eukrea.com (Eric Bénard)]

Hi,

Le 13/07/2010 15:02, Jason Wang a ?crit :
> The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init
> and irq_init sequence. Usually we will call set_irq_chained_handler
> in gpio_init functions, this should be called after the irq_init
> called, otherwise the chained irq can't get propoer irq_chip and this
> irq will remain masked even we called set_irq_chained_handler.
>
> Signed-off-by: Jason Wang<jason77.wang@gmail.com>
> ---
>   arch/arm/mach-imx/mm-imx1.c  |    2 +-
>   arch/arm/mach-imx/mm-imx21.c |    2 +-
>   arch/arm/mach-imx/mm-imx27.c |    2 +-
>   arch/arm/mach-mx25/mm.c      |    2 +-
>   arch/arm/mach-mx3/mm.c       |    2 +-
>   arch/arm/mach-mx5/mm.c       |    2 +-
>   6 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
> index 117ebf6..9be92b9 100644
> --- a/arch/arm/mach-imx/mm-imx1.c
> +++ b/arch/arm/mach-imx/mm-imx1.c
> @@ -45,6 +45,6 @@ int imx1_register_gpios(void);
>
>   void __init mx1_init_irq(void)
>   {
> -	imx1_register_gpios();
>   	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
> +	imx1_register_gpios();
>   }
> diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
> index 68aa5d2..12faeea 100644
> --- a/arch/arm/mach-imx/mm-imx21.c
> +++ b/arch/arm/mach-imx/mm-imx21.c
> @@ -81,6 +81,6 @@ int imx21_register_gpios(void);
>
>   void __init mx21_init_irq(void)
>   {
> -	imx21_register_gpios();
>   	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
> +	imx21_register_gpios();
>   }
> diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
> index bcedce9..a246229 100644
> --- a/arch/arm/mach-imx/mm-imx27.c
> +++ b/arch/arm/mach-imx/mm-imx27.c
> @@ -81,6 +81,6 @@ int imx27_register_gpios(void);
>
>   void __init mx27_init_irq(void)
>   {
> -	imx27_register_gpios();
>   	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
> +	imx27_register_gpios();
>   }
> diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
> index 593e145..bb67711 100644
> --- a/arch/arm/mach-mx25/mm.c
> +++ b/arch/arm/mach-mx25/mm.c
> @@ -69,7 +69,7 @@ int imx25_register_gpios(void);
>
>   void __init mx25_init_irq(void)
>   {
> -	imx25_register_gpios();
>   	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
> +	imx25_register_gpios();
>   }
>
> diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
> index a378fba..20e48c0 100644
> --- a/arch/arm/mach-mx3/mm.c
> +++ b/arch/arm/mach-mx3/mm.c
> @@ -97,8 +97,8 @@ int imx3x_register_gpios(void);
>
>   void __init mx31_init_irq(void)
>   {
> -	imx3x_register_gpios();
>   	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
> +	imx3x_register_gpios();
>   }
>
>   void __init mx35_init_irq(void)
> diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
> index 2f79722..bc3f30d 100644
> --- a/arch/arm/mach-mx5/mm.c
> +++ b/arch/arm/mach-mx5/mm.c
> @@ -81,6 +81,6 @@ void __init mx51_init_irq(void)
>   	if (!tzic_virt)
>   		panic("unable to map TZIC interrupt controller\n");
>
> -	imx51_register_gpios();
>   	tzic_init_irq(tzic_virt);
> +	imx51_register_gpios();
>   }
Tested-by: Eric B?nard <eric@eukrea.com>

on i.MX51 : this patch seems necessary to get gpio IRQ working.

Eric