From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4C4E8A64.1000701@domain.hid> Date: Tue, 27 Jul 2010 09:27:32 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <1279046702.31665.65.camel@domain.hid> <4C3CB655.1020801@domain.hid> <1279048661.31665.81.camel@domain.hid> <1280149567.1856.15.camel@domain.hid> <4C4D9131.7080504@domain.hid> <1280153187.1856.25.camel@domain.hid> <4C4D97AC.2030609@domain.hid> <1280154697.1856.29.camel@domain.hid> <4C4D9E04.6060407@domain.hid> <1280156219.1856.32.camel@domain.hid> <4C4DA340.4030400@domain.hid> <1280187666.1963.34.camel@domain.hid> In-Reply-To: <1280187666.1963.34.camel@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Kernel compilation procedures for imx51 List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: flavio.alves@domain.hid Cc: xenomai@xenomai.org Flavio Alves wrote: > Hello, > > I finally could get the linux-imx from the Freescale's git site. > > As you mentioned in the readme, when the patch is applied to the kernel, > I found errors during the patch. There should not be errors, there should be only one reject. But, it was found errors on the patch, > the remaining operations of the scripts/prepare-kernel.sh script are > stopped. > > Should I continue anyway? Does this patch execution problem does not > cause any other problem during the kernel build? You have to apply the patch by hand, then run the prepare-kernel.sh script. -- Gilles.