From: Chanwoo Choi <cw00.choi@samsung.com>
To: linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Cc: linux-samsung-soc <linux-samsung-soc@vger.kernel.org>,
alsa-devel@alsa-project.org, Kukjin Kim <kgene.kim@samsung.com>,
Ben Dooks <ben@simtec.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@slimlogic.co.uk>,
Kyungmin Park <kyungmin.park@samsung.com>,
Joonyoung Shim <jy0922.shim@samsung.com>
Subject: [PATCH 2/2] ARM: S5PV210: Add the GPIO lib
Date: Wed, 28 Jul 2010 12:04:45 +0900 [thread overview]
Message-ID: <4C4F9E4D.4090608@samsung.com> (raw)
This patch add the definition of GPIO to support WM8994 audio codec on
I2C bus.
Signed-off-by : Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by : Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5pv210/include/mach/gpio.h | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index d6461ba..33a9867 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -52,6 +52,8 @@
#define S5PV210_GPIO_MP01_NR (8)
#define S5PV210_GPIO_MP02_NR (4)
#define S5PV210_GPIO_MP03_NR (8)
+#define S5PV210_GPIO_MP04_NR (8)
+#define S5PV210_GPIO_MP05_NR (8)
/* GPIO bank numbers */
@@ -94,6 +96,8 @@ enum s5p_gpio_number {
S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+ S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+ S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
};
/* S5PV210 GPIO number definitions */
@@ -127,13 +131,15 @@ enum s5p_gpio_number {
#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr))
/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
+#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: S5PV210: Add the GPIO lib
Date: Wed, 28 Jul 2010 12:04:45 +0900 [thread overview]
Message-ID: <4C4F9E4D.4090608@samsung.com> (raw)
This patch add the definition of GPIO to support WM8994 audio codec on
I2C bus.
Signed-off-by : Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by : Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-s5pv210/include/mach/gpio.h | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index d6461ba..33a9867 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -52,6 +52,8 @@
#define S5PV210_GPIO_MP01_NR (8)
#define S5PV210_GPIO_MP02_NR (4)
#define S5PV210_GPIO_MP03_NR (8)
+#define S5PV210_GPIO_MP04_NR (8)
+#define S5PV210_GPIO_MP05_NR (8)
/* GPIO bank numbers */
@@ -94,6 +96,8 @@ enum s5p_gpio_number {
S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+ S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+ S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
};
/* S5PV210 GPIO number definitions */
@@ -127,13 +131,15 @@ enum s5p_gpio_number {
#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr))
/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
+#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
next reply other threads:[~2010-07-28 3:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-28 3:04 Chanwoo Choi [this message]
2010-07-28 3:04 ` [PATCH 2/2] ARM: S5PV210: Add the GPIO lib Chanwoo Choi
2010-07-28 8:09 ` Marek Szyprowski
2010-07-28 8:09 ` Marek Szyprowski
2010-07-28 8:54 ` Chanwoo Choi
2010-07-28 8:54 ` Chanwoo Choi
2010-07-29 17:40 ` Mark Brown
2010-07-29 17:40 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C4F9E4D.4090608@samsung.com \
--to=cw00.choi@samsung.com \
--cc=alsa-devel@alsa-project.org \
--cc=ben@simtec.co.uk \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=jy0922.shim@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.