From: Juergen Gross <juergen.gross@ts.fujitsu.com>
To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
Keir Fraser <keir.fraser@eu.citrix.com>
Subject: Re: ACPI-Tables corrupted?
Date: Thu, 29 Jul 2010 08:19:56 +0200 [thread overview]
Message-ID: <4C511D8C.1010808@ts.fujitsu.com> (raw)
In-Reply-To: <20100728133648.GC4272@phenom.dumpdata.com>
[-- Attachment #1: Type: text/plain, Size: 3000 bytes --]
On 07/28/2010 03:36 PM, Konrad Rzeszutek Wilk wrote:
>> The really clean solution would be to virtualize the ACPI table for dom0 and
>> remove the DMAR entry in this version. This would require some major work, I
>> guess (clone at least the BIOS page containing the ACPI anchor and present
>> a modified version to dom0).
>
> Well, that is what it does right now. It zeros it out so that the DMAR
> entry is gone from the ACPI tables.
No. It changes the ORIGINAL ACPI table, not a copy of it.
>
> I am not really sure that having a DMAR accessible to Dom0 is good. You
> would have two entities trying to write to the DMAR's to control the
> IOMMU and the PCI devices. Does Xen enable the IOMMU? Do you see that in
> the serial log?
I don't want to let dom0 access DMAR. I want the crash kernel be able to
access it.
And I think Xen does enable the IOMMU:
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation supported.
(XEN) Intel VT-d Interrupt Remapping supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) x2APIC mode enabled.
>>
>>>
>>>>>> The crash kernel expects a valid DMAR entry, as following code in
>>>>>> enable_IR_x2apic() suggests:
>>>>>
>>>>> I don't know what that function does, nor how the error path below depends
>>>>> on DMAR. DMAR isn't mentioned in the below code.
>>>>
>>>> Sorry, here a larger fragment (source arch/x86/kernel/apic/apic.c):
>>>> /* IR is required if there is APIC ID> 255 even when running
>>>> * under KVM
>>>> */
>>>> if (max_physical_apicid> 255 || !kvm_para_available())
>>>> goto nox2apic;
>>>
>>> The if stmt is confusing. Also, what would happen if this kernel was booted
>>> on a system without VT-d (and hence no DMAR)? Presumably it *can* boot in a
>>> DMAR-less environment -- there must be something odd going on for it to end
>>> on this path for us.
>>
>> Yeah, that puzzled me, too.
>
> What is the crash? And do you see any indiciation that x2APIC is turned
> on? Do provide a serial log please.
Log is attached.
I did some more testing. The problem occurred on a Nehalem-EX system. I tried
the same on a Nehalem-EP system and all was okay. I suspect some further
problems in the ACPI tables of the EX system now. I'm not too familiar with
ACPI tables. Anything I can do for further analysis?
Juergen
--
Juergen Gross Principal Developer Operating Systems
TSP ES&S SWE OS6 Telephone: +49 (0) 89 3222 2967
Fujitsu Technology Solutions e-mail: juergen.gross@ts.fujitsu.com
Domagkstr. 28 Internet: ts.fujitsu.com
D-80807 Muenchen Company details: ts.fujitsu.com/imprint.html
[-- Attachment #2: crash.log --]
[-- Type: text/x-log, Size: 32574 bytes --]
(XEN) 'C' pressed -> triggering crashdump
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.12-0.7-default (geeko@buildhost) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP 2010-05-20 11:14:20 +0200
[ 0.000000] Command line: root=/dev/md11 swiotlb=128 reassigndev=all console=tty0 console=ttyS0,38400 xencons=ttyS0 elevator=deadline sysrq=1 reset_devices irqpoll maxcpus=1 kernelversion=2.6.32.12-0.7-xen noirqdebug memmap=exactmap memmap=640K@0K memmap=261484K@17024K elfcorehdr=278508K memmap=5992K#1968932K memmap=4624K#1974924K memmap=220K#1980024K memmap=80K#1980256K memmap=4K#1980352K memmap=136K#1980364K memmap=188K#1980632K memmap=3076K#1981080K memmap=2584K#1984348K memmap=2048K#1986932K memmap=1880K#1988980K memmap=88K#1990948K memmap=20K#1991092K memmap=32K#1991116K memmap=20K#1991156K memmap=4636K#1991180K memmap=32672K#1996252K memmap=1312K#2029884K memmap=224K#2031196K memmap=192K#2031420K
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000100 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000782c9000 (usable)
[ 0.000000] BIOS-e820: 00000000782c9000 - 00000000788a3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000788a3000 - 0000000078d27000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078d27000 - 0000000078d9e000 (reserved)
[ 0.000000] BIOS-e820: 0000000078d9e000 - 0000000078dd5000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078dd5000 - 0000000078dd8000 (reserved)
[ 0.000000] BIOS-e820: 0000000078dd8000 - 0000000078dec000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078dec000 - 0000000078df0000 (reserved)
[ 0.000000] BIOS-e820: 0000000078df0000 - 0000000078df1000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078df1000 - 0000000078df3000 (reserved)
[ 0.000000] BIOS-e820: 0000000078df3000 - 0000000078e15000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078e15000 - 0000000078e36000 (reserved)
[ 0.000000] BIOS-e820: 0000000078e36000 - 0000000078e65000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000078e65000 - 0000000078ea6000 (reserved)
[ 0.000000] BIOS-e820: 0000000078ea6000 - 00000000791a7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000791a7000 - 00000000791d7000 (reserved)
[ 0.000000] BIOS-e820: 00000000791d7000 - 000000007945d000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007945d000 - 000000007965d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007965d000 - 0000000079833000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000079833000 - 0000000079849000 (reserved)
[ 0.000000] BIOS-e820: 0000000079849000 - 000000007985f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007985f000 - 000000007986d000 (reserved)
[ 0.000000] BIOS-e820: 000000007986d000 - 0000000079872000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000079872000 - 0000000079873000 (reserved)
[ 0.000000] BIOS-e820: 0000000079873000 - 000000007987b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007987b000 - 000000007987d000 (reserved)
[ 0.000000] BIOS-e820: 000000007987d000 - 0000000079882000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000079882000 - 0000000079883000 (reserved)
[ 0.000000] BIOS-e820: 0000000079883000 - 0000000079d0a000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000079d0a000 - 0000000079d77000 (reserved)
[ 0.000000] BIOS-e820: 0000000079d77000 - 000000007bd5f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bd5f000 - 000000007be4f000 (reserved)
[ 0.000000] BIOS-e820: 000000007be4f000 - 000000007bf97000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bf97000 - 000000007bfcf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bfcf000 - 000000007bfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bfff000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec04000 - 00000000fec05000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000004080000000 (usable)
[ 0.000000] last_pfn = 0x4080000 max_arch_pfn = 0x400000000
[ 0.000000] user-defined physical RAM map:
[ 0.000000] user: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] user: 00000000010a0000 - 0000000010ffb000 (usable)
[ 0.000000] user: 00000000782c9000 - 0000000078d27000 (ACPI data)
[ 0.000000] user: 0000000078d9e000 - 0000000078dd5000 (ACPI data)
[ 0.000000] user: 0000000078dd8000 - 0000000078dec000 (ACPI data)
[ 0.000000] user: 0000000078df0000 - 0000000078df1000 (ACPI data)
[ 0.000000] user: 0000000078df3000 - 0000000078e15000 (ACPI data)
[ 0.000000] user: 0000000078e36000 - 0000000078e65000 (ACPI data)
[ 0.000000] user: 0000000078ea6000 - 00000000791a7000 (ACPI data)
[ 0.000000] user: 00000000791d7000 - 0000000079833000 (ACPI data)
[ 0.000000] user: 0000000079849000 - 000000007985f000 (ACPI data)
[ 0.000000] user: 000000007986d000 - 0000000079872000 (ACPI data)
[ 0.000000] user: 0000000079873000 - 000000007987b000 (ACPI data)
[ 0.000000] user: 000000007987d000 - 0000000079882000 (ACPI data)
[ 0.000000] user: 0000000079883000 - 0000000079d0a000 (ACPI data)
[ 0.000000] user: 0000000079d77000 - 000000007bd5f000 (ACPI data)
[ 0.000000] user: 000000007be4f000 - 000000007bfff000 (ACPI data)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x10ffb max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] x2apic enabled by BIOS, switching to x2apic ops
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable)
[ 0.000000] modified: 00000000010a0000 - 0000000010ffb000 (usable)
[ 0.000000] modified: 00000000782c9000 - 0000000078d27000 (ACPI data)
[ 0.000000] modified: 0000000078d9e000 - 0000000078dd5000 (ACPI data)
[ 0.000000] modified: 0000000078dd8000 - 0000000078dec000 (ACPI data)
[ 0.000000] modified: 0000000078df0000 - 0000000078df1000 (ACPI data)
[ 0.000000] modified: 0000000078df3000 - 0000000078e15000 (ACPI data)
[ 0.000000] modified: 0000000078e36000 - 0000000078e65000 (ACPI data)
[ 0.000000] modified: 0000000078ea6000 - 00000000791a7000 (ACPI data)
[ 0.000000] modified: 00000000791d7000 - 0000000079833000 (ACPI data)
[ 0.000000] modified: 0000000079849000 - 000000007985f000 (ACPI data)
[ 0.000000] modified: 000000007986d000 - 0000000079872000 (ACPI data)
[ 0.000000] modified: 0000000079873000 - 000000007987b000 (ACPI data)
[ 0.000000] modified: 000000007987d000 - 0000000079882000 (ACPI data)
[ 0.000000] modified: 0000000079883000 - 0000000079d0a000 (ACPI data)
[ 0.000000] modified: 0000000079d77000 - 000000007bd5f000 (ACPI data)
[ 0.000000] modified: 000000007be4f000 - 000000007bfff000 (ACPI data)
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010ffb000
[ 0.000000] RAMDISK: 10ab8000 - 10feea25
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 FSC )
[ 0.000000] ACPI: XSDT 000000007bffc120 000BC (v01 FSC PC 00000000 01000013)
[ 0.000000] ACPI: FACP 000000007bffb000 000F4 (v04 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 000000007bfdf000 1B243 (v02 FSC PC 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACS 000000007bf97000 00040
[ 0.000000] ACPI: APIC 000000007bfde000 003E4 (v02 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: MSCT 000000007bfdd000 00090 (v01 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 000000007bfdc000 0003C (v01 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: HPET 000000007bfdb000 00038 (v01 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SLIT 000000007bfda000 0003C (v01 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SRAT 000000007bfd9000 00930 (v02 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SPCR 000000007bfd8000 00050 (v01 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 000000007bfd7000 00040 (v01 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 000000007bf5a000 3CFA4 (v02 FSC PC 00004000 INTL 20090903)
[ 0.000000] ACPI: SSDT 000000007bfd6000 00024 (v02 FSC PC 00004000 INTL 20090903)
[ 0.000000] ACPI: PMCT 000000007bfd5000 00060 (v01 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: MIGT 000000007bfd4000 00040 (v01 FSC PC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: SLIC 000000007bfd3000 00176 (v01 FSC PC 00000002 01000013)
[ 0.000000] ACPI: HEST 000000007bfd2000 000A8 (v01 FSC PC 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 000000007bfd1000 00030 (v01 FSC PC 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 000000007bfd0000 00230 (v01 FSC PC 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 000000007bfcf000 00130 (v01 FSC PC 00000001 INTL 00000001)
[ 0.000000] ACPI: 000000007bf59000 00308 (v01 FSC PC 00000001 MSFT 0100000D)
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 64 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 96 -> Node 3
[ 0.000000] SRAT: PXM 2 -> APIC 66 -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 36 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 100 -> Node 3
[ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 70 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 38 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 102 -> Node 3
[ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 80 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 48 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 112 -> Node 3
[ 0.000000] SRAT: PXM 0 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 114 -> Node 3
[ 0.000000] SRAT: PXM 2 -> APIC 84 -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 22 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 86 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 54 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 118 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-80000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-880000000
[ 0.000000] SRAT: Node 0 PXM 0 880000000-1080000000
[ 0.000000] SRAT: Node 2 PXM 1 1080000000-1880000000
[ 0.000000] SRAT: Node 2 PXM 1 1880000000-2080000000
[ 0.000000] SRAT: Node 1 PXM 2 2080000000-2880000000
[ 0.000000] SRAT: Node 1 PXM 2 2880000000-3080000000
[ 0.000000] SRAT: Node 3 PXM 3 3080000000-3880000000
[ 0.000000] SRAT: Node 3 PXM 3 3880000000-4080000000
[ 0.000000] SRAT: Node 0 PXM 0 4100000000-6100000000
[ 0.000000] SRAT: hot plug zone found 4100000000 - 6100000000
[ 0.000000] SRAT: Node 0 PXM 0 6100000000-8100000000
[ 0.000000] SRAT: hot plug zone found 4100000000 - 8100000000
[ 0.000000] SRAT: Node 2 PXM 1 8100000000-a100000000
[ 0.000000] SRAT: hot plug zone found 8100000000 - a100000000
[ 0.000000] SRAT: Node 2 PXM 1 a100000000-c100000000
[ 0.000000] SRAT: hot plug zone found 8100000000 - c100000000
[ 0.000000] SRAT: Node 1 PXM 2 c100000000-e100000000
[ 0.000000] SRAT: hot plug zone found c100000000 - e100000000
[ 0.000000] SRAT: Node 1 PXM 2 e100000000-10100000000
[ 0.000000] SRAT: hot plug zone found c100000000 - 10100000000
[ 0.000000] SRAT: Node 3 PXM 3 10100000000-12100000000
[ 0.000000] SRAT: hot plug zone found 10100000000 - 12100000000
[ 0.000000] SRAT: Node 3 PXM 3 12100000000-14100000000
[ 0.000000] SRAT: hot plug zone found 10100000000 - 14100000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000010ffb000
[ 0.000000] NODE_DATA [0000000000009600 - 000000000003d5ff]
[ 0.000000] bootmap [000000000003e000 - 00000000000401ff] pages 3
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0010ffb000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0002000000 - 0002cd7778] TEXT DATA BSS ==> [0002000000 - 0002cd7778]
[ 0.000000] #3 [0010ab8000 - 0010feea25] RAMDISK ==> [0010ab8000 - 0010feea25]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0002cd8000 - 0002cd8521] BRK ==> [0002cd8000 - 0002cd8521]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] #7 [0000009000 - 000000903c] ACPI SLIT ==> [0000009000 - 000000903c]
[ 0.000000] #8 [0000009080 - 0000009600] MEMNODEMAP ==> [0000009080 - 0000009600]
[ 0.000000] found SMP MP-table at [ffff8800000fde00] fde00
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x000000a0
[ 0.000000] 0: 0x000010a0 -> 0x00010ffb
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Setting APIC routing to cluster x2apic.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x40] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x60] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x42] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x62] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x44] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x64] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x46] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x66] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x50] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x70] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x52] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x72] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x54] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x74] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x56] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x76] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x41] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x61] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x43] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x63] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x45] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x65] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x47] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x67] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x51] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x71] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x53] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x73] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x55] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x75] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x57] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x77] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec04000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec04000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000
[ 0.000000] SMP: Allowing 64 CPUs, 40 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000010a0000
[ 0.000000] Allocating PCI resources starting at 7bfff000 (gap: 7bfff000:84001000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:4096 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:4
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880002e00000 s82072 r8192 d24424 u131072
[ 0.000000] pcpu-alloc: s82072 r8192 d24424 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
[ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
[ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64574
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/md11 swiotlb=128 reassigndev=all console=tty0 console=ttyS0,38400 xencons=ttyS0 elevator=deadline sysrq=1 reset_devices irqpoll maxcpus=1 kernelversion=2.6.32.12-0.7-xen noirqdebug memmap=exactmap memmap=640K@0K memmap=261484K@17024K elfcorehdr=278508K memmap=5992K#1968932K memmap=4624K#1974924K memmap=220K#1980024K memmap=80K#1980256K memmap=4K#1980352K memmap=136K#1980364K memmap=188K#1980632K memmap=3076K#1981080K memmap=2584K#1984348K memmap=2048K#1986932K memmap=1880K#1988980K memmap=88K#1990948K memmap=20K#1991092K memmap=32K#1991116K memmap=20K#1991156K memmap=4636K#1991180K memmap=32672K#1996252K memmap=1312K#2029884K memmap=224K#2031196K memmap=192K#2031420K
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] IRQ lockup detection disabled
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 229800k/278508k available (3703k kernel code, 16404k absent, 32304k reserved, 5688k data, 964k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:33024 nr_irqs:1736
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 3932160 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Fast TSC calibration using PIT
[ 0.008000] Detected 2659.691 MHz processor.
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.38 BogoMIPS (lpj=10638764)
[ 0.035553] pid_max: default: 65536 minimum: 512
[ 0.051265] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
kdb_cmd[0]: defcmd archkdb "" "First line arch debugging"
kdb_cmd[8]: defcmd archkdbcpu "" "archkdb with only tasks on cpus"
kdb_cmd[15]: defcmd archkdbshort "" "archkdb with less detailed backtrace"
kdb_cmd[22]: defcmd archkdbcommon "" "Common arch debugging"
[ 0.156408] Security Framework initialized
[ 0.170050] AppArmor: AppArmor initialized
[ 0.183754] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.206965] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.229857] Mount-cache hash table entries: 256
[ 0.245241] Initializing cgroup subsys ns
[ 0.258574] Initializing cgroup subsys cpuacct
[ 0.273344] Initializing cgroup subsys memory
[ 0.287847] Initializing cgroup subsys devices
[ 0.302609] Initializing cgroup subsys freezer
[ 0.317370] Initializing cgroup subsys net_cls
[ 0.332226] CPU: Physical Processor ID: 0
[ 0.345557] CPU: Processor Core ID: 0
[ 0.357745] mce: CPU supports 22 MCE banks
[ 0.371390] CPU0: Thermal monitoring enabled (TM1)
[ 0.387306] using mwait in idle threads.
[ 0.400346] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.422717] ... version: 3
[ 0.436047] ... bit width: 48
[ 0.449660] ... generic registers: 4
[ 0.462986] ... value mask: 0000ffffffffffff
[ 0.480610] ... max period: 000000007fffffff
[ 0.498232] ... fixed-purpose events: 3
[ 0.511558] ... event mask: 000000070000000f
[ 0.529194] SMP alternatives: switching to UP code
[ 0.551422] ACPI: Core revision 20090903
[ 0.723874] Kernel panic - not syncing: x2apic: enabled by BIOS but kernel init failed.
[ 0.750460] Pid: 1, comm: swapper Not tainted 2.6.32.12-0.7-default #1
[ 0.772093] Call Trace:
[ 0.780289] [<ffffffff810061dc>] dump_trace+0x6c/0x2d0
[ 0.797640] [<ffffffff81394288>] dump_stack+0x69/0x71
[ 0.814698] [<ffffffff81394308>] panic+0x78/0x199
[ 0.830613] [<ffffffff8195014f>] enable_IR_x2apic+0x171/0x1b7
[ 0.849968] [<ffffffff8194de41>] native_smp_prepare_cpus+0x139/0x281
[ 0.871320] [<ffffffff81943837>] kernel_init+0xb8/0x1b2
[ 0.888949] [<ffffffff81003fba>] child_rip+0xa/0x20
[ 0.905419] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 0.931563] IP: [<ffffffff810600ba>] queue_work_on+0x2a/0x60
[ 0.950408] PGD 0
[ 0.957221] Oops: 0000 [#1] SMP
[ 0.968091] last sysfs file:
[ 0.977978] CPU 0
[ 0.984789] Modules linked in:
[ 0.995036] Supported: Yes
[ 1.004064] Pid: 1, comm: swapper Not tainted 2.6.32.12-0.7-default #1 PRIMERGY RX600 S5
[ 1.030918] RIP: 0010:[<ffffffff810600ba>] [<ffffffff810600ba>] queue_work_on+0x2a/0x60
[ 1.057852] RSP: 0018:ffff88000f449e00 EFLAGS: 00010246
[ 1.075472] RAX: ffffffff81852308 RBX: ffffffff81531f10 RCX: 0000000000000000
[ 1.099102] RDX: ffffffff81852300 RSI: 0000000000000000 RDI: 0000000000000000
[ 1.122732] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
[ 1.146364] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[ 1.169996] R13: 0000000000000246 R14: 0000000000013480 R15: 0000000000013480
[ 1.193627] FS: 0000000000000000(0000) GS:ffff880002e00000(0000) knlGS:0000000000000000
[ 1.220483] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 1.239533] CR2: 0000000000000020 CR3: 0000000002804000 CR4: 00000000000006f0
[ 1.263165] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.286798] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.310427] Process swapper (pid: 1, threadinfo ffff88000f448000, task ffff88000f446040)
[ 1.337284] Stack:
[ 1.344020] 0000000000013480 ffffffff81225dac ffff88000fe96580 ffffffff8139436d
[ 1.368165] <0> 0000000000000008 ffff88000f449e90 ffff88000f449e40 0000000000000282
[ 1.393965] <0> ffff88000fe96580 0000000000000082 000000000000001c ffff88000fe96580
[ 1.420463] Call Trace:
[ 1.428641] [<ffffffff81225dac>] splash_verbose+0x2c/0x40
[ 1.446835] [<ffffffff8139436d>] panic+0xdd/0x199
[ 1.464004] [<ffffffff8195014f>] enable_IR_x2apic+0x171/0x1b7
[ 1.483342] [<ffffffff8194de41>] native_smp_prepare_cpus+0x139/0x281
[ 1.504685] [<ffffffff81943837>] kernel_init+0xb8/0x1b2
[ 1.522306] [<ffffffff81003fba>] child_rip+0xa/0x20
[ 1.538779] Code: 00 48 83 ec 08 41 89 f8 3e 0f ba 2a 00 19 c0 31 c9 85 c0 74 0c 89 c8 48 83 c4 08 c3 0f 1f 44 00 00 48 8d 42 08 48 39 42 08 75 2f <8b> 7e 20 85 ff 44 0f 45 05 39 79 8c 00 48 8b 3e 48 89 d6 49 63
[ 1.605994] RIP [<ffffffff810600ba>] queue_work_on+0x2a/0x60
[ 1.625119] RSP <ffff88000f449e00>
[ 1.636723] CR2: 0000000000000020
[ 1.647771] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 1.663116] Kernel panic - not syncing: Attempted to kill init!
[ 1.682746] Pid: 1, comm: swapper Tainted: G D 2.6.32.12-0.7-default #1
[ 1.707601] Call Trace:
[ 1.715784] [<ffffffff810061dc>] dump_trace+0x6c/0x2d0
[ 1.733133] [<ffffffff81394288>] dump_stack+0x69/0x71
[ 1.750189] [<ffffffff81394308>] panic+0x78/0x199
[ 1.766106] [<ffffffff81050bf2>] forget_original_parent+0x332/0x340
[ 1.787171] [<ffffffff81050c10>] exit_notify+0x10/0x190
[ 1.804803] [<ffffffff81050f08>] do_exit+0x178/0x360
[ 1.821572] [<ffffffff813980a1>] oops_end+0xe1/0xf0
[ 1.838058] [<ffffffff8102d955>] __bad_area_nosemaphore+0x155/0x230
[ 1.859125] [<ffffffff813972ef>] page_fault+0x1f/0x30
[ 1.876187] [<ffffffff810600ba>] queue_work_on+0x2a/0x60
[ 1.894104] [<ffffffff81225dac>] splash_verbose+0x2c/0x40
[ 1.912306] [<ffffffff8139436d>] panic+0xdd/0x199
[ 1.928218] [<ffffffff8195014f>] enable_IR_x2apic+0x171/0x1b7
[ 1.947542] [<ffffffff8194de41>] native_smp_prepare_cpus+0x139/0x281
[ 1.968893] [<ffffffff81943837>] kernel_init+0xb8/0x1b2
[ 1.986524] [<ffffffff81003fba>] child_rip+0xa/0x20
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2010-07-29 6:19 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-28 9:38 ACPI-Tables corrupted? Juergen Gross
2010-07-28 10:03 ` Keir Fraser
2010-07-28 11:26 ` Juergen Gross
2010-07-28 11:39 ` Keir Fraser
2010-07-28 12:13 ` Juergen Gross
2010-07-28 12:45 ` Keir Fraser
2010-07-28 13:27 ` Juergen Gross
2010-07-28 13:36 ` Konrad Rzeszutek Wilk
2010-07-29 6:19 ` Juergen Gross [this message]
2010-07-29 6:39 ` Keir Fraser
2010-07-29 6:48 ` Juergen Gross
2010-07-29 6:48 ` Keir Fraser
2010-07-29 6:53 ` Juergen Gross
2010-08-06 13:39 ` Jan Beulich
2010-08-06 14:04 ` Keir Fraser
2010-07-29 6:31 ` Jiang, Yunhong
2010-07-29 6:40 ` Keir Fraser
2010-07-29 6:48 ` Keir Fraser
2010-07-29 7:37 ` Jiang, Yunhong
2010-07-29 9:04 ` Juergen Gross
2010-07-29 9:33 ` Keir Fraser
2010-07-29 10:24 ` Keir Fraser
2010-07-30 4:47 ` Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C511D8C.1010808@ts.fujitsu.com \
--to=juergen.gross@ts.fujitsu.com \
--cc=keir.fraser@eu.citrix.com \
--cc=konrad.wilk@oracle.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.