All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike McCormack <mikem@ring3k.org>
To: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org
Subject: [PATCH] sky2: Code style fixes
Date: Thu, 29 Jul 2010 22:34:52 +0900	[thread overview]
Message-ID: <4C51837C.4020505@ring3k.org> (raw)

Fix selected style problems reported by checkpatch.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
---
 drivers/net/sky2.c |   24 ++++++++++++------------
 1 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 8b85c02..8723e3d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -79,7 +79,7 @@
 
 #define SKY2_EEPROM_MAGIC	0x9955aabb
 
-#define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
+#define RING_NEXT(x, s)	(((x)+1) & ((s)-1))
 
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
@@ -172,7 +172,7 @@ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
 		udelay(10);
 	}
 
-	dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
+	dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
 	return -ETIMEDOUT;
 
 io_error:
@@ -1078,7 +1078,7 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 	return le;
 }
 
-static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
+static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
 {
 	unsigned size;
 
@@ -1089,7 +1089,7 @@ static unsigned sky2_get_rx_threshold(struct sky2_port* sky2)
 	return (size - 8) / sizeof(u32);
 }
 
-static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
+static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
 {
 	struct rx_ring_info *re;
 	unsigned size;
@@ -1113,7 +1113,7 @@ static unsigned sky2_get_rx_data_size(struct sky2_port* sky2)
 }
 
 /* Build description to hardware for one receive segment */
-static void sky2_rx_add(struct sky2_port *sky2,  u8 op,
+static void sky2_rx_add(struct sky2_port *sky2, u8 op,
 			dma_addr_t map, unsigned len)
 {
 	struct sky2_rx_le *le;
@@ -3019,7 +3019,7 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 	hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
 	hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
 
-	switch(hw->chip_id) {
+	switch (hw->chip_id) {
 	case CHIP_ID_YUKON_XL:
 		hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
 		if (hw->chip_rev < CHIP_REV_YU_XL_A2)
@@ -3690,7 +3690,7 @@ static int sky2_set_mac_address(struct net_device *dev, void *p)
 	return 0;
 }
 
-static void inline sky2_add_filter(u8 filter[8], const u8 *addr)
+static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
 {
 	u32 bit;
 
@@ -3916,7 +3916,7 @@ static int sky2_set_coalesce(struct net_device *dev,
 		return -EINVAL;
 	if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
 		return -EINVAL;
-	if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
+	if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
 		return -EINVAL;
 
 	if (ecmd->tx_coalesce_usecs == 0)
@@ -4381,7 +4381,7 @@ static int sky2_debug_show(struct seq_file *seq, void *v)
 			seq_printf(seq, "%u:", idx);
 		sop = 0;
 
-		switch(le->opcode & ~HW_OWNER) {
+		switch (le->opcode & ~HW_OWNER) {
 		case OP_ADDR64:
 			seq_printf(seq, " %#x:", a);
 			break;
@@ -4450,7 +4450,7 @@ static int sky2_device_event(struct notifier_block *unused,
 	if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
 		return NOTIFY_DONE;
 
-	switch(event) {
+	switch (event) {
 	case NETDEV_CHANGENAME:
 		if (sky2->debugfs) {
 			sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
@@ -4645,7 +4645,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 	struct pci_dev *pdev = hw->pdev;
 	int err;
 
-	init_waitqueue_head (&hw->msi_wait);
+	init_waitqueue_head(&hw->msi_wait);
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
 
@@ -4762,7 +4762,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	 * this driver uses software swapping.
 	 */
 	reg &= ~PCI_REV_DESC;
-	err = pci_write_config_dword(pdev,PCI_DEV_REG2, reg);
+	err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
 	if (err) {
 		dev_err(&pdev->dev, "PCI write config failed\n");
 		goto err_out_free_regions;
-- 
1.5.6.5


             reply	other threads:[~2010-07-29 13:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-29 13:34 Mike McCormack [this message]
2010-07-29 17:27 ` [PATCH] sky2: Code style fixes Stephen Hemminger
2010-07-31  6:59   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C51837C.4020505@ring3k.org \
    --to=mikem@ring3k.org \
    --cc=netdev@vger.kernel.org \
    --cc=shemminger@vyatta.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.