From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4C51AE7E.3000306@domain.hid> Date: Thu, 29 Jul 2010 18:38:22 +0200 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <4C4F7930.90408@domain.hid> <4C4F7AF8.8090500@domain.hid> <4C4F949F.9090200@domain.hid> <4C4FDFD2.4010405@domain.hid> <4C50D87B.2010008@domain.hid> <4C512F32.3030903@domain.hid> <4C51AC2B.20000@domain.hid> In-Reply-To: <4C51AC2B.20000@domain.hid> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Xenomai xeno-test hangs on 2.6.31 on BeagleBoard, same works on 2.6.33 List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Bob Feretich Cc: xenomai@xenomai.org Bob Feretich wrote: > Then what is the recommended set of test to run to determine if > Xenomai is fully and properly installed? We validate Xenomai by running the latency test while running a script called "dohell" in order to apply some load on the board, which requires installing a few things on the board (LTP, netcat, the dohell script). I described the procedure in the following mail: https://mail.gna.org/public/xenomai-help/2010-07/msg00184.html To have some basic validation, you may run the tests from the testsuite one by one. I am currently working on a replacement for xeno-test, which would enable us to automate the procedure. -- Gilles.