From: yaiba.kurogane-khu2bkKidpXVItvQsEIGlw@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [nouveau-drm] failed to set mode on crtc
Date: Tue, 03 Aug 2010 00:19:15 +0200 [thread overview]
Message-ID: <4C574463.3080201@interia.pl> (raw)
Hi. I have a problem with current kernel 2.6.35 and nouveau module
compiled from git (today).From xorg.0.log I got information that no
output was found.And here is some nasty kernel logs:
...
Aug 2 21:53:02 zilog kernel: Linux agpgart interface v0.103
Aug 2 21:53:02 zilog kernel: [drm] Initialized drm 1.1.0 20060810
Aug 2 21:53:02 zilog kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16
(level, low) -> IRQ 16
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Detected an
NV10 generation card (0x017100a3)
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Attempting to
load BIOS image from PRAMIN
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: ... appears to
be valid
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: BMP BIOS found
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: BMP version 5.20
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Bios version
04.17.00.18
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Found Display
Configuration Block version 1.4
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: No useful
information in BIOS output table; adding all possible outputs
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Loading NV17
power sequencing microcode
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 0 at offset 0xC4D2
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 1 at offset 0xC77E
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 2 at offset 0xC5BC
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 3 at offset 0xCC81
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS
init table 4 at offset 0xC719
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Detected 64MiB
VRAM
Aug 2 21:53:02 zilog kernel: [TTM] Zone kernel: Available graphics
memory: 320512 kiB.
Aug 2 21:53:02 zilog kernel: [TTM] Initializing pool allocator.
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: 64 MiB GART
(aperture)
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Saving VGA fonts
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Allocating
FIFO number 0
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0:
nouveau_channel_alloc: initialised FIFO 0
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Setting dpms
mode 3 on vga encoder (output 0)
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: Setting dpms
mode 3 on tmds encoder (output 1)
Aug 2 21:53:02 zilog kernel: [drm] nouveau 0000:01:00.0: allocated
1280x1024 fb: 0x48000, bo e6e43c00
Aug 2 21:53:02 zilog kernel: [drm:drm_crtc_helper_set_config] *ERROR*
failed to set mode on crtc e72b1000
Aug 2 21:53:02 zilog kernel: fbcon_init: detected unhandled fb_set_par
error, error code -22
Aug 2 21:53:02 zilog kernel: [drm:drm_crtc_helper_set_config] *ERROR*
failed to set mode on crtc e72b1000
Aug 2 21:53:02 zilog kernel: Console: switching to colour frame buffer
device 160x64
Aug 2 21:53:02 zilog kernel: [drm:drm_crtc_helper_set_config] *ERROR*
failed to set mode on crtc e72b1000
Aug 2 21:53:02 zilog kernel: fb0: nouveaufb frame buffer device
Aug 2 21:53:02 zilog kernel: drm: registered panic notifier
Aug 2 21:53:02 zilog kernel: Slow work thread pool: Starting up
Aug 2 21:53:02 zilog kernel: Slow work thread pool: Ready
Aug 2 21:53:02 zilog kernel: [drm] Initialized nouveau 0.0.16 20090420
for 0000:01:00.0 on minor 0
...
What is going on?
----------------------------------------------------------------------
Rozpocznij z nami zabawe ... czekamy na Ciebie w saloonie.
Sprawdz >> http://linkint.pl/f27ba
next reply other threads:[~2010-08-02 22:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-02 22:19 yaiba.kurogane-khu2bkKidpXVItvQsEIGlw [this message]
[not found] ` <4C574463.3080201-khu2bkKidpXVItvQsEIGlw@public.gmane.org>
2010-08-04 19:04 ` [nouveau-drm] failed to set mode on crtc Francisco Jerez
-- strict thread matches above, loose matches on Subject: below --
2010-08-05 18:56 yaiba.kurogane-khu2bkKidpXVItvQsEIGlw
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C574463.3080201@interia.pl \
--to=yaiba.kurogane-khu2bkkidpxvitvqseiglw@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.