From: Wei Yongjun <yjwei@cn.fujitsu.com>
To: Avi Kivity <avi@redhat.com>, kvm@vger.kernel.org
Subject: [PATCH 2/4] KVM: x86 emulator: disable writeback when decode dest operand
Date: Wed, 04 Aug 2010 15:38:18 +0800 [thread overview]
Message-ID: <4C5918EA.7020905@cn.fujitsu.com> (raw)
In-Reply-To: <4C591895.5040505@cn.fujitsu.com>
This patch change to disable writeback when decode dest
operand if the dest type is ImplicitOps or not specified.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
---
arch/x86/kvm/emulate.c | 23 ++++++-----------------
1 files changed, 6 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 4624b11..31c33f4 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2569,9 +2569,6 @@ done_prefixes:
/* Decode and fetch the destination operand: register or memory. */
switch (c->d & DstMask) {
- case ImplicitOps:
- /* Special instructions do their own operand decoding. */
- return 0;
case DstReg:
decode_register_operand(&c->dst, c,
c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
@@ -2606,6 +2603,11 @@ done_prefixes:
c->regs[VCPU_REGS_RDI]);
c->dst.val = 0;
break;
+ case ImplicitOps:
+ /* Special instructions do their own operand decoding. */
+ default:
+ c->dst.type = OP_NONE; /* Disable writeback. */
+ return 0;
}
done:
@@ -3040,7 +3042,6 @@ special_insn:
case 0xf5: /* cmc */
/* complement carry flag from eflags reg */
ctxt->eflags ^= EFLG_CF;
- c->dst.type = OP_NONE; /* Disable writeback. */
break;
case 0xf6 ... 0xf7: /* Grp3 */
if (!emulate_grp3(ctxt, ops))
@@ -3048,16 +3049,13 @@ special_insn:
break;
case 0xf8: /* clc */
ctxt->eflags &= ~EFLG_CF;
- c->dst.type = OP_NONE; /* Disable writeback. */
break;
case 0xfa: /* cli */
if (emulator_bad_iopl(ctxt, ops)) {
emulate_gp(ctxt, 0);
goto done;
- } else {
+ } else
ctxt->eflags &= ~X86_EFLAGS_IF;
- c->dst.type = OP_NONE; /* Disable writeback. */
- }
break;
case 0xfb: /* sti */
if (emulator_bad_iopl(ctxt, ops)) {
@@ -3066,16 +3064,13 @@ special_insn:
} else {
ctxt->interruptibility = KVM_X86_SHADOW_INT_STI;
ctxt->eflags |= X86_EFLAGS_IF;
- c->dst.type = OP_NONE; /* Disable writeback. */
}
break;
case 0xfc: /* cld */
ctxt->eflags &= ~EFLG_DF;
- c->dst.type = OP_NONE; /* Disable writeback. */
break;
case 0xfd: /* std */
ctxt->eflags |= EFLG_DF;
- c->dst.type = OP_NONE; /* Disable writeback. */
break;
case 0xfe: /* Grp4 */
grp45:
@@ -3212,16 +3207,13 @@ twobyte_insn:
break;
case 0x06:
emulate_clts(ctxt->vcpu);
- c->dst.type = OP_NONE;
break;
case 0x09: /* wbinvd */
kvm_emulate_wbinvd(ctxt->vcpu);
- c->dst.type = OP_NONE;
break;
case 0x08: /* invd */
case 0x0d: /* GrpP (prefetch) */
case 0x18: /* Grp16 (prefetch/nop) */
- c->dst.type = OP_NONE;
break;
case 0x20: /* mov cr, reg */
switch (c->modrm_reg) {
@@ -3274,7 +3266,6 @@ twobyte_insn:
goto done;
}
rc = X86EMUL_CONTINUE;
- c->dst.type = OP_NONE;
break;
case 0x32:
/* rdmsr */
@@ -3286,7 +3277,6 @@ twobyte_insn:
c->regs[VCPU_REGS_RDX] = msr_data >> 32;
}
rc = X86EMUL_CONTINUE;
- c->dst.type = OP_NONE;
break;
case 0x34: /* sysenter */
rc = emulate_sysenter(ctxt, ops);
@@ -3310,7 +3300,6 @@ twobyte_insn:
case 0x80 ... 0x8f: /* jnz rel, etc*/
if (test_cc(c->b, ctxt->eflags))
jmp_rel(c, c->src.val);
- c->dst.type = OP_NONE;
break;
case 0xa0: /* push fs */
emulate_push_sreg(ctxt, ops, VCPU_SREG_FS);
--
1.7.0.4
next prev parent reply other threads:[~2010-08-04 7:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-04 7:36 [PATCH 1/4] KVM: x86 emulator: use SrcAcc to simplify stos decoding Wei Yongjun
2010-08-04 7:38 ` Wei Yongjun [this message]
2010-08-04 7:38 ` [PATCH 3/4] KVM: x86 emulator: using SrcOne for instruction d0/d1 decoding Wei Yongjun
2010-08-05 9:38 ` Avi Kivity
2010-08-04 7:40 ` [PATCH 4/4] KVM: x86 emulator: remove dup code of in/out instruction Wei Yongjun
2010-08-05 9:37 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C5918EA.7020905@cn.fujitsu.com \
--to=yjwei@cn.fujitsu.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.