From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: Re: PM branch updated to v2.6.35, SRF dropped Date: Wed, 4 Aug 2010 18:25:05 -0500 Message-ID: <4C59F6D1.8050804@ti.com> References: <8739uu9em0.fsf@deeprootsystems.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:49444 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759458Ab0HDXZH (ORCPT ); Wed, 4 Aug 2010 19:25:07 -0400 In-Reply-To: <8739uu9em0.fsf@deeprootsystems.com> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Kevin Hilman Cc: "linux-omap@vger.kernel.org" Kevin Hilman had written, on 08/04/2010 05:50 PM, the following: [...] > I've only tested the new PM branch on a couple boards to avoid any > further delay getting this version out, update, so hopefully others will > help test. > > I've tested RET on idle & suspend, OFF in idle & suspend on: > > 3430/omap3evm: works > > 3630/Zoom3: works > - Known problem: console hangs on UART wakeup when wakeups are enabled using > echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup > but I haven't debugged this further. Just sharing results from SDP testing omap3_pm_defconfig + earlyprintk: SDP3430 (with denx.com u-boot, nor boot): does not boot to shell full Bootlog: http://pastebin.mozilla.org/761964 SDP3630 (with TI u-boot, xloader, mmc boot): ret works, uart wakeup fails for off mode (I am guessing this is similar to Kevin's results) full Bootlog: http://pastebin.mozilla.org/761966 OMAP4 Blaze (with TI u-boot, xloader, mmc boot): does not boot, hell lot of crashes - note, need to explicitly enable MACH_OMAP4430_SDP in .config full Bootlog: http://pastebin.mozilla.org/761968 [...] -- Regards, Nishanth Menon