All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Yongjun <yjwei@cn.fujitsu.com>
To: Paolo Bonzini <pbonzini@redhat.com>, Avi Kivity <avi@redhat.com>
Cc: kvm@vger.kernel.org
Subject: [PATCHv3] KVM: x86 emulator: fix BitOp instruction emulation
Date: Thu, 05 Aug 2010 14:07:21 +0800	[thread overview]
Message-ID: <4C5A5519.9090400@cn.fujitsu.com> (raw)
In-Reply-To: <4C5935CD.7010005@redhat.com>

If bit offset operands is a negative number, BitOp instruction
will return wrong value. This patch fix it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
---
 arch/x86/kvm/emulate.c |   45 ++++++++++++++++++++++++++++++---------------
 1 files changed, 30 insertions(+), 15 deletions(-)

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index d197b46..8763708 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -724,6 +724,33 @@ done:
 	return rc;
 }
 
+static void fetch_bit_operand(struct decode_cache *c)
+{
+	unsigned long mask, byte_offset;
+
+	if (c->dst.type != OP_MEM || c->src.type != OP_REG) {
+		/* Only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		return;
+	}
+
+	if (c->src.bytes == 2)
+		c->src.val = (s16)c->src.val;
+	else if (c->src.bytes == 4)
+		c->src.val = (s32)c->src.val;
+
+	mask = ~(c->dst.bytes * 8 - 1);
+
+	if ((long)c->src.val > 0) {
+		c->dst.addr.mem = c->dst.addr.mem + (c->src.val & mask) / 8;
+		c->src.val &= (c->dst.bytes << 3) - 1;
+	} else {
+		byte_offset = c->dst.bytes + ((-c->src.val - 1) & mask) / 8;
+		c->dst.addr.mem -= byte_offset;
+		c->src.val += byte_offset << 3;
+	}
+}
+
 static int read_emulated(struct x86_emulate_ctxt *ctxt,
 			 struct x86_emulate_ops *ops,
 			 unsigned long addr, void *dest, unsigned size)
@@ -2261,7 +2288,7 @@ static struct opcode twobyte_table[256] = {
 	    D(DstReg | SrcMem16 | ModRM | Mov),
 	/* 0xB8 - 0xBF */
 	N, N,
-	G(0, group8), D(DstMem | SrcReg | ModRM | BitOp | Lock),
+	G(BitOp, group8), D(DstMem | SrcReg | ModRM | BitOp | Lock),
 	N, N, D(ByteOp | DstReg | SrcMem | ModRM | Mov),
 	    D(DstReg | SrcMem16 | ModRM | Mov),
 	/* 0xC0 - 0xCF */
@@ -2587,12 +2614,8 @@ done_prefixes:
 			c->dst.bytes = 8;
 		else
 			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		if (c->dst.type == OP_MEM && (c->d & BitOp)) {
-			unsigned long mask = ~(c->dst.bytes * 8 - 1);
-
-			c->dst.addr.mem = c->dst.addr.mem +
-						   (c->src.val & mask) / 8;
-		}
+		if (c->d & BitOp)
+			fetch_bit_operand(c);
 		c->dst.orig_val = c->dst.val;
 		break;
 	case DstAcc:
@@ -3303,8 +3326,6 @@ twobyte_insn:
 	case 0xa3:
 	      bt:		/* bt */
 		c->dst.type = OP_NONE;
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0xa4: /* shld imm8, r, r/m */
@@ -3321,8 +3342,6 @@ twobyte_insn:
 		break;
 	case 0xab:
 	      bts:		/* bts */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0xac: /* shrd imm8, r, r/m */
@@ -3350,8 +3369,6 @@ twobyte_insn:
 		break;
 	case 0xb3:
 	      btr:		/* btr */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0xb6 ... 0xb7:	/* movzx */
@@ -3373,8 +3390,6 @@ twobyte_insn:
 		break;
 	case 0xbb:
 	      btc:		/* btc */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0xbe ... 0xbf:	/* movsx */
-- 
1.7.0.4



  reply	other threads:[~2010-08-05  6:09 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-04  8:27 [PATCH] KVM: x86 emulator: fix group 8 instruction decoding Wei Yongjun
2010-08-04  9:01 ` [PATCH] KVM: x86 emulator: cleanup for BitOp instruction emulation Wei Yongjun
2010-08-04  9:26   ` Paolo Bonzini
2010-08-04  9:36     ` Wei Yongjun
2010-08-04  9:37     ` [PATCHv2] " Wei Yongjun
2010-08-04  9:45       ` Paolo Bonzini
2010-08-04  9:41 ` [PATCH] KVM: x86 emulator: fix group 8 instruction decoding Paolo Bonzini
2010-08-05  6:07   ` Wei Yongjun [this message]
2010-08-05  9:05 ` Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C5A5519.9090400@cn.fujitsu.com \
    --to=yjwei@cn.fujitsu.com \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.