All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
To: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, "Basak,
	Partha" <p-basak2-l0cyMroinI0@public.gmane.org>,
	Felipe Balbi
	<felipe.balbi-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>,
	Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
	Kevin Hilman
	<khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>
Subject: Re: [PATCH 8/8 ]usb : musb:Using runtime pm apis for musb.
Date: Wed, 11 Aug 2010 15:35:29 +0400	[thread overview]
Message-ID: <4C628B01.2010009@mvista.com> (raw)
In-Reply-To: <4C5D8150.4020009-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>

Hello.

I wrote:

>> Calling runtime pm APIs pm_runtime_put_sync() and 
>> pm_runtime_get_sync() for enabling/disabling the clocks,sysconfig 
>> settings.

>> used omap_hwmod_enable_wakeup & omap_hwmod_disable_wakeup apis to 
>> set/clear
>> the wakeup enable bit.
>> Also need to put the USB in force standby and force idle mode when usb 
>> not used
>> and set it back to smart idle and smart stndby after wakeup.
>> these cases are handled using the oh flags.
>> For omap3430 auto idle bit has to be disabled because of the errata.So 
>> using HWMOD_NO_OCP_AUTOIDLE flag for OMAP3430.

>> Signed-off-by: Hema HK <hemahk-l0cyMroinI0@public.gmane.org>
>> Signed-off-by: Basak, Partha <p-basak2-l0cyMroinI0@public.gmane.org>

>> Cc: Felipe Balbi <felipe.balbi-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org>
>> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
>> Cc: Kevin Hilman <khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>

[...]

>> Index: linux-omap-pm/include/linux/usb/musb.h
>> ===================================================================
>> --- linux-omap-pm.orig/include/linux/usb/musb.h    2010-08-06 
>> 10:44:06.000000000 -0400
>> +++ linux-omap-pm/include/linux/usb/musb.h    2010-08-06 
>> 10:44:42.946115274 -0400
>> @@ -10,6 +10,9 @@
>>  #ifndef __LINUX_USB_MUSB_H
>>  #define __LINUX_USB_MUSB_H
>>  
>> +#include <linux/platform_device.h>

>    You could just use incomplete declaration of 'struct platfrom_device' 
> instead of this #include.

>> +#include <plat/omap_hwmod.h>

    Did you think about the other platfroms where this file doesn't exist? How 
are they supposed to compile?!
    I think this #include needs to be wrapped in #ifdef as well...

>> +
>>  /* The USB role is defined by the connector used on the board, so 
>> long as
>>   * standards are being followed.  (Developer boards sometimes won't.)
>>   */
>> @@ -129,6 +132,21 @@
>>  
>>      /* check usb device active state*/
>>      int        (*is_usb_active)(struct device *dev);
>> +
>> +    /* omap hwmod data structure     */
>> +    struct    omap_hwmod *oh;

>    This should be wrapped into #ifdef, don't you think?

>> +    /* enable clocks and set sysconfig register*/
>> +    int        (*device_enable)(struct platform_device *pdev);
>> +
>> +    /* Disable clock and reset the sysconfig register settings*/
>> +    int        (*device_idle)(struct platform_device *pdev);
>> +
>> +    /* set the enable wakeup bit of sysconfig register */
>> +    int        (*enable_wakeup)(struct omap_device *od);
>> +
>> +    /* Clear the enable wakeup bit  of sysconfig register */
>> +    int        (*disable_wakeup)(struct omap_device *od);

>    This should be wrapped too, I think...

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2010-08-11 11:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-06 17:29 [PATCH 8/8 ]usb : musb:Using runtime pm apis for musb Hema HK
     [not found] ` <1281115749-1601-1-git-send-email-hemahk-l0cyMroinI0@public.gmane.org>
2010-08-07 15:52   ` Sergei Shtylyov
     [not found]     ` <4C5D8150.4020009-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2010-08-11 11:35       ` Sergei Shtylyov [this message]
     [not found]         ` <4C628B01.2010009-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>
2010-08-16 12:11           ` Kalliguddi, Hema
2010-08-09 14:07   ` Cousson, Benoit
2010-08-10  5:07     ` Kalliguddi, Hema

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C628B01.2010009@mvista.com \
    --to=sshtylyov-igf4poytycdqt0dzr+alfa@public.gmane.org \
    --cc=felipe.balbi-xNZwKgViW5gAvxtiuMwx3w@public.gmane.org \
    --cc=hemahk-l0cyMroinI0@public.gmane.org \
    --cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
    --cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=p-basak2-l0cyMroinI0@public.gmane.org \
    --cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.