From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [140.186.70.92] (port=38565 helo=eggs.gnu.org) by lists.gnu.org with esmtp (Exim 4.43) id 1OkujL-0002kt-AL for qemu-devel@nongnu.org; Mon, 16 Aug 2010 04:07:48 -0400 Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.69) (envelope-from ) id 1OkujE-0001jv-BI for qemu-devel@nongnu.org; Mon, 16 Aug 2010 04:07:39 -0400 Received: from outernational.org ([83.151.25.142]:27625 helo=tarifa.mistrust.net) by eggs.gnu.org with esmtp (Exim 4.69) (envelope-from ) id 1OkujE-0001gb-6q for qemu-devel@nongnu.org; Mon, 16 Aug 2010 04:07:32 -0400 Message-ID: <4C68F1B6.508@mistrust.net> Date: Mon, 16 Aug 2010 10:07:18 +0200 From: Sebastian Schuetz MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Subject: [Qemu-devel] USB-Mass-Storage and OpenBSD 4.7 problem List-Id: qemu-devel.nongnu.org List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: qemu-devel@nongnu.org Hello list, I am trying to write to an usb image file using OpenBSD 4.7 as guest and a fresh "QEMU emulator version 0.12.90". While trying to access the device I got the following error messages: ~~~~~~~~snip~~~~~~~~~~~ umass0 at uhub0 port 1 configuration 1 interface 0 "QEMU 0.12.90 QEMU USB HARDDRIVE" rev 1.00/0.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: SCSI3 0/direct fixed sd0: 1024MB, 512 bytes/sec, 2097152 sec total umass0: Invalid CSW: sig 0x00000000 should be 0x53425355 umass0: Invalid CSW: sig 0x00000000 should be 0x53425355 # newfs /dev/rsd0a /dev/rsd0a: 1024.0MB in 2097088 sectors of 512 bytes 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each super-block backups (for fsck -b #) at: umass0: Invalid CSW: sig 0x00000000 should be 0x53425355 newfs: wtfs: write error on block 192: Input/output error # disklabel sd0 # /dev/rsd0c: type: SCSI disk: SCSI disk label: QEMU HARDDISK flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 255 sectors/cylinder: 16065 cylinders: 130 total sectors: 2097152 rpm: 3600 interleave: 1 boundstart: 0 boundend: 2097152 drivedata: 0 16 partitions: # size offset fstype [fsize bsize cpg] a: 2097089 63 4.2BSD 2048 16384 1 c: 2097152 0 unused # ~~~~~~~~~~~snip~~~~~~~~~~~~ Using some hardware USB-Stick (plugged into the host and forward it to the guest) works fine. Anyone have a clue about it? Please cc me in your replies because I am not subscribed to the list. Cheers, Sebastian