All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Mayer (Mayer Electronics) <Florian.Mayer@mayer-electronics.de>
To: ofono@ofono.org
Subject: ppp0 interface is not configured
Date: Tue, 17 Aug 2010 18:38:33 +0200	[thread overview]
Message-ID: <4C6ABB09.9000307@mayer-electronics.de> (raw)

[-- Attachment #1: Type: text/plain, Size: 2633 bytes --]

Hello all,

we currently test the PPP dialup with a Huawei EM770W modem. We can 
connect with create-context and activate context but the ppp device is 
not configured. connman says that the device is not connected. We use 
connman 0.55 and ofono 0.26.
What did we do wrong? The kernel is 2.6.35~pre5 from Meego 1.1 devel.

Regards
Florian Mayer
Mayer Electronics

# /usr/lib/ofono/test/list-modems
[ /huawei0 ]
    Features = sms gprs cbs net sim
    Powered = 1
    Interfaces = org.ofono.SmsManager org.ofono.DataConnectionManager 
org.ofono.CellBroadcast org.ofono.NetworkRegistration 
org.ofono.SupplementaryServices org.ofono.SimManager
    Online = 1
    Model = EM770W
    Manufacturer = huawei
    Serial = xyz
    Revision = 11.126.10.81.00
    [ org.ofono.SmsManager ]
        UseDeliveryReports = 0
        Bearer = cs-preferred
        ServiceCenterAddress = +491710760000
    [ org.ofono.DataConnectionManager ]
        Powered = 1
        Attached = 1
        PrimaryContexts = /huawei0/primarycontext1
        RoamingAllowed = 1
    [ org.ofono.CellBroadcast ]
        Topics =
        Powered = 1
    [ org.ofono.NetworkRegistration ]
        Status = registered
        Strength = 70
        Name = T-Mobile D
        Operators = /huawei0/operator/26201
        LocationAreaCode = 34591
        Mode = auto
        MobileCountryCode = 262
        CellId = 5950877
        MobileNetworkCode = 01
    [ org.ofono.SupplementaryServices ]
        State = idle
    [ org.ofono.SimManager ]
        SubscriberNumbers =
        LockedPins =
        SubscriberIdentity = xyz
        Present = 1
        PinRequired = none

# /usr/lib/ofono/test/list-contexts
[ /huawei0 ]
    [ /huawei0/primarycontext1 ]
        Username =
        Protocol = ip
        Name = 3G Connection
        Settings = { Interface=ppp0 Netmask=255.255.255.255 
Method=static DomainNameServers=193.254.160.1,10.74.83.22, 
Address=88.128.36.75 }
        Active = 1
        AccessPointName = internet.t-d1.de
        Password =
        Type = internet

# /usr/lib/connman/test/list-networks
....
[ /org/moblin/connman/device/262012020178698 ]
    [ /org/moblin/connman/device/262012020178698/primarycontext1 ]
        Device = /org/moblin/connman/device/262012020178698
        Strength = 70
        Connected = 0
        Name = T-Mobile D

# /usr/lib/connman/test/list-devices
....
[ /org/moblin/connman/device/262012020178698 ]
    Networks = /org/moblin/connman/device/262012020178698/primarycontext1
    Type = cellular
    Name = Cellular
    Powered = 1




             reply	other threads:[~2010-08-17 16:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-17 16:38 Florian Mayer [this message]
2010-08-17 16:45 ` ppp0 interface is not configured Marcel Holtmann
2010-08-17 17:24   ` Florian Mayer
2010-08-17 17:33     ` Marcel Holtmann
  -- strict thread matches above, loose matches on Subject: below --
2010-08-17 16:41 Florian Mayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C6ABB09.9000307@mayer-electronics.de \
    --to=florian.mayer@mayer-electronics.de \
    --cc=ofono@ofono.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.