From: Tim <Timbo2001@web.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] Problem openWRT "backfire" and "kmod-batman-adv"
Date: Sat, 21 Aug 2010 10:09:20 +0200 [thread overview]
Message-ID: <4C6F89B0.2040506@web.de> (raw)
In-Reply-To: <mailman.33.1282337388.934.b.a.t.m.a.n@lists.open-mesh.org>
Hi everybody,
> Ok, could you please try the attached patch? Just add it to the other patches
> (you can omit 03-... after a successful test. But it may reveal interesting
> information if that wasn't the actual problem). Don't forget to cleanup your
> openwrt build environment.
>
> Best regards,
> Sven
>
the patch seems to work. Just did some basic testing and was able to
build up a network, even with the devices running older versions.
I will continue testing within the next few days, but now I need to
focus on creating a presentation for Wednesday.
I also added the output of dmesg:
root@OpenWrt:/# dmesg
Linux version 2.6.32.16 (tim@atze) (gcc version 4.3.3 (GCC) ) #1 Fri Aug
20 20:56:09 CEST 2010
CPU revision is: 00029008 (Broadcom BCM3302)
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243)
ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243)
ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243)
ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 4 => 4
ssb: set_irq: core 0x0816, irq 5 => 2
ssb: set_irq: core 0x0812, irq 2 => 5
ssb: after irq reconfiguration
ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I
ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0817, irq : 2(S) 3 4 5 6* D I
ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
ssb: core 0x0812, irq : 2(S) 3 4 5* 6 D I
ssb: core 0x081c, irq : 2(S) 3 4 5 6 D I*
ssb: Sonics Silicon Backplane found at address 0x18000000
Serial init done.
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00001000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00001000
On node 0 totalpages: 4096
free_area_init_node: node 0, pgdat 802a5b50, node_mem_map 802eb000
Normal zone: 32 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 4064 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2
noinitrd console=ttyS0,115200
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
Memory: 13236k/16384k available (2231k kernel code, 3148k reserved, 476k
data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 199.16 BogoMIPS (lpj=398336)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 25
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
CFI mfr 0x000000c2
CFI id 0x000022a8
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.1.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x400000 at 0x1fc00000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x000000000000-0x000000040000 : "cfe"
0x000000040000-0x0000003f0000 : "linux"
0x000000122c00-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary
or be smaller than an erase block -- forcing read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=2A0000, len=150000
0x0000002a0000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "nvram"
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:25:9c:3c:46:04
BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
diag: Detected 'Linksys WRT54G/GS/GL'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found a 5325! It's a 5350.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering forwarding state
Compat-wireless backport release: compat-wireless-2010-07-13-4-g04898a5
Backport based on wireless-2.6.git v2.6.35-rc6-48432-gdce358e
cfg80211: Calling CRDA to update world regulatory domain
b43-phy0: Broadcom 5352 WLAN found (core revision 9)
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (208 buckets, 832 max)
batman-adv-dbg: go through if_list
batman-adv-dbg: final min_mtu is 1500
batman-adv-dbg: got event 5 for net_dev 80845c00
batman-adv-dbg: will add net_device 80845c00 to if_list
batman-adv-dbg: got batman_if (null) for net_dev 80845c00
batman-adv-dbg: got event 1 for net_dev 80845c00
batman-adv-dbg: got batman_if (null) for net_dev 80845c00
batman-adv-dbg: got event 5 for net_dev 8086f000
batman-adv-dbg: will add net_device 8086f000 to if_list
batman-adv-dbg: added net_device 8086f000 to if_list as 8042b900
batman-adv-dbg: got batman_if 8042b900 for net_dev 8086f000
batman-adv-dbg: got event 1 for net_dev 8086f000
batman-adv-dbg: got batman_if 8042b900 for net_dev 8086f000
batman-adv-dbg: hardif_activate_interface(8054eec0, 8042b900)
batman-adv-dbg: got event 5 for net_dev 80f0d800
batman-adv-dbg: will add net_device 80f0d800 to if_list
batman-adv-dbg: added net_device 80f0d800 to if_list as 8042b880
batman-adv-dbg: got batman_if 8042b880 for net_dev 80f0d800
batman-adv-dbg: got event 1 for net_dev 80f0d800
batman-adv-dbg: got batman_if 8042b880 for net_dev 80f0d800
batman-adv-dbg: hardif_activate_interface(8054eec0, 8042b880)
batman-adv-dbg: got event 5 for net_dev 808e9000
batman-adv-dbg: will add net_device 808e9000 to if_list
batman-adv-dbg: added net_device 808e9000 to if_list as 8042b800
batman-adv-dbg: got batman_if 8042b800 for net_dev 808e9000
batman-adv-dbg: got event 1 for net_dev 808e9000
batman-adv-dbg: got batman_if 8042b800 for net_dev 808e9000
batman-adv-dbg: hardif_activate_interface(8054eec0, 8042b800)
batman-adv-dbg: got event 5 for net_dev 80d03000
batman-adv-dbg: will add net_device 80d03000 to if_list
batman-adv-dbg: added net_device 80d03000 to if_list as 8042b780
batman-adv-dbg: got batman_if 8042b780 for net_dev 80d03000
batman-adv-dbg: got event 1 for net_dev 80d03000
batman-adv-dbg: got batman_if 8042b780 for net_dev 80d03000
batman-adv-dbg: hardif_activate_interface(8054eec0, 8042b780)
batman-adv-dbg: got event 5 for net_dev 80c74800
batman-adv-dbg: will add net_device 80c74800 to if_list
batman-adv-dbg: added net_device 80c74800 to if_list as 8042b700
batman-adv-dbg: got batman_if 8042b700 for net_dev 80c74800
batman-adv-dbg: got event 5 for net_dev 8054ec00
batman-adv-dbg: will add net_device 8054ec00 to if_list
batman-adv-dbg: got batman_if (null) for net_dev 8054ec00
batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded
batman-adv-dbg: got event 13 for net_dev 8054ec00
batman-adv-dbg: got batman_if (null) for net_dev 8054ec00
batman-adv-dbg: got event 1 for net_dev 8054ec00
batman-adv-dbg: got batman_if (null) for net_dev 8054ec00
device bat0 entered promiscuous mode
br-lan: port 2(bat0) entering forwarding state
batman-adv-dbg: got event 6 for net_dev 80c74800
batman-adv-dbg: got batman_if 8042b700 for net_dev 80c74800
batman-adv-dbg: hardif_remove_interface(8042b700)
batman-adv-dbg: will remove batman_if 8042b700
batman-adv-dbg: putted netdev 80c74800 of batman_if 8042b700
batman-adv-dbg: removed batman_if 8042b700
batman-adv-dbg: got event 5 for net_dev 80c74800
batman-adv-dbg: will add net_device 80c74800 to if_list
batman-adv-dbg: added net_device 80c74800 to if_list as 8042be80
batman-adv-dbg: got batman_if 8042be80 for net_dev 80c74800
batman-adv-dbg: got event 8 for net_dev 80c74800
batman-adv-dbg: got batman_if 8042be80 for net_dev 80c74800
batman-adv-dbg: got event 13 for net_dev 80c74800
batman-adv-dbg: got batman_if 8042be80 for net_dev 80c74800
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
batman-adv-dbg: got event 1 for net_dev 80c74800
batman-adv-dbg: got batman_if 8042be80 for net_dev 80c74800
batman-adv-dbg: hardif_activate_interface(8054eec0, 8042be80)
batman-adv-dbg: got event 7 for net_dev 80c74800
batman-adv-dbg: got batman_if 8042be80 for net_dev 80c74800
wlan0: Creating new IBSS network, BSSID 02:12:34:56:78:9a
batman-adv:Adding interface: wlan0
batman-adv:Interface activated: wlan0
batman-adv-dbg: update_min_mtu for softdevice 8054ec00
batman-adv-dbg: go through if_list
batman-adv-dbg: check batman_if 8042b900
batman-adv-dbg: batman_if 8042b900 has status 0
batman-adv-dbg: batman_if 8042b900 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b880
batman-adv-dbg: batman_if 8042b880 has status 0
batman-adv-dbg: batman_if 8042b880 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b800
batman-adv-dbg: batman_if 8042b800 has status 0
batman-adv-dbg: batman_if 8042b800 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b780
batman-adv-dbg: batman_if 8042b780 has status 0
batman-adv-dbg: batman_if 8042b780 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042be80
batman-adv-dbg: batman_if 8042be80 has status 4
batman-adv-dbg: compare batman_if 8042be80 with net_dev 80c74800
batman-adv-dbg: compare batman_if 8042be80 with 1524 against 1500
batman-adv-dbg: batman_if 8042be80 round got min_mtu 1500
batman-adv-dbg: final min_mtu is 1500
batman-adv-dbg: found min_mtu 1500
batman-adv-dbg: update_min_mtu for softdevice 8054ec00
batman-adv-dbg: go through if_list
batman-adv-dbg: check batman_if 8042b900
batman-adv-dbg: batman_if 8042b900 has status 0
batman-adv-dbg: batman_if 8042b900 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b880
batman-adv-dbg: batman_if 8042b880 has status 0
batman-adv-dbg: batman_if 8042b880 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b800
batman-adv-dbg: batman_if 8042b800 has status 0
batman-adv-dbg: batman_if 8042b800 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042b780
batman-adv-dbg: batman_if 8042b780 has status 0
batman-adv-dbg: batman_if 8042b780 round got min_mtu 1500
batman-adv-dbg: check batman_if 8042be80
batman-adv-dbg: batman_if 8042be80 has status 4
batman-adv-dbg: compare batman_if 8042be80 with net_dev 80c74800
batman-adv-dbg: compare batman_if 8042be80 with 1524 against 1500
batman-adv-dbg: batman_if 8042be80 round got min_mtu 1500
batman-adv-dbg: final min_mtu is 1500
batman-adv-dbg: found min_mtu 1500
root@OpenWrt:/#
Greetings,
Tim
next parent reply other threads:[~2010-08-21 8:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <mailman.33.1282337388.934.b.a.t.m.a.n@lists.open-mesh.org>
2010-08-21 8:09 ` Tim [this message]
2010-08-21 8:15 ` [B.A.T.M.A.N.] Problem openWRT "backfire" and "kmod-batman-adv" Sven Eckelmann
2010-08-18 6:42 Tim
[not found] ` <201008201211.51847.sven.eckelmann@gmx.de>
[not found] ` <4C6E8B79.7040801@web.de>
2010-08-20 14:44 ` Sven Eckelmann
2010-08-20 15:38 ` Sven Eckelmann
[not found] ` <4C6F5950.8070204@bb.banban.jp>
2010-08-21 6:19 ` Sven Eckelmann
-- strict thread matches above, loose matches on Subject: below --
2010-08-17 9:20 Tim
2010-08-17 9:27 ` Sven Eckelmann
2010-08-17 9:45 ` Tim
2010-08-17 9:51 ` Sven Eckelmann
2010-08-12 18:04 Tim Glaremin
2010-08-13 3:24 ` Sven Eckelmann
2010-08-14 17:26 ` Marek Lindner
2010-08-16 16:51 ` Marek Lindner
2010-08-12 10:14 Tim Glaremin
2010-08-12 10:30 ` Marek Lindner
2010-08-12 10:32 ` Sven Eckelmann
[not found] <mailman.1.1281002401.15834.b.a.t.m.a.n@lists.open-mesh.org>
2010-08-11 10:47 ` Tim
2010-08-11 11:14 ` Marek Lindner
2010-08-11 11:20 ` Sven Eckelmann
2010-08-11 14:23 ` Tim
2010-08-11 14:52 ` Sven Eckelmann
2010-08-04 9:21 Tim
2010-08-04 9:34 ` Sven Eckelmann
2010-08-04 22:03 ` Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C6F89B0.2040506@web.de \
--to=timbo2001@web.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.