[U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support

[Heiko Schocher <hs@denx.de>]

Hello Ben,

Ben Gardiner wrote:
> Split the existing dram_init for da8xx when ARM reloc is enabled, like the
> changes to arch/arm/cpu/arm926ejs/orion5x/dram.c in
> 0f234d263b17ccf1b8fd776eb8c15b7cdb27a887 by Heiko Schocher <hs@denx.de>.
> 
> Without these changes gd->ram_size is '0' which leads to incorrect relocation
> when CONFIG_SYS_ARM_WITHOUT_RELOC is defined and the board does not boot.
> 
> We use get_ram_size to dynamically calculate the available RAM because it runs
> on different board version with different ram, as suggested by Heiko in private
> communication.
> 
> Tested on a da850evm with 128M of DDR2 installed; with both
> CONFIG_SYS_ARM_WITHOUT_RELOC defined and undefined.
> 
> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
> ---
> This patch is submitted for the arm-reloc-and-cache-support branch of 
> git://git.denx.de/u-boot-testing.git
> 
> V2:
>  * added Nori Sehkar to the to: list
>  * indicated for which branch of testing this patch is submitted.
> 
>  board/davinci/common/misc.c |   17 +++++++++++++++++
>  include/configs/da850evm.h  |    1 +
>  2 files changed, 18 insertions(+), 0 deletions(-)
> 
> diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
> index 25ca326..e8acefe 100644
> --- a/board/davinci/common/misc.c
> +++ b/board/davinci/common/misc.c
> @@ -33,6 +33,7 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
>  int dram_init(void)
>  {
>  	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> @@ -40,6 +41,22 @@ int dram_init(void)
>  
>  	return(0);
>  }
> +#else
> +int dram_init(void)
> +{
> +	/* dram_init must store complete ramsize in gd->ram_size */
> +	gd->ram_size = get_ram_size(
> +			(volatile void *)CONFIG_SYS_SDRAM_BASE,
> +			CONFIG_MAX_RAM_BANK_SIZE);
> +	return(0);
> +}
> +
> +void dram_init_banksize (void)
> +{
> +	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
> +	gd->bd->bi_dram[0].size = gd->ram_size;
> +}
> +#endif
>  
>  #ifdef CONFIG_DRIVER_TI_EMAC
>  
> diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
> index 016a21e..c929f6b 100644
> --- a/include/configs/da850evm.h
> +++ b/include/configs/da850evm.h
> @@ -47,6 +47,7 @@
>  #define CONFIG_SYS_GBL_DATA_SIZE	128 /* reserved for initial data */
>  #define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
>  #define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
> +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /*DDR2 Data region maximum size from SPRS586*/

Line to long, please fix.

>  /* memtest start addr */
>  #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany