Hi Thiago,

On 08/24/2010 03:25 PM, Thiago Cangussu de Castro Gomes wrote:
> On Wed, Aug 18, 2010 at 7:31 PM, Denis Kenzior <denkenz@gmail.com> wrote:
>>>> For your particular case these patches from Kalle would be helpful:
>>>>
>>>> [PATCH 1/2] huawei: poll sim state
>>>> [PATCH 2/2] huawei: postpone post_sim until SIM is ready
>>>>
>>>> However, they weren't integrated upstream due to some concerns.  See the
>>>> entire thread for more details.
>>>
>>> I've applied the patches but unfortunately it didn't fixed the issue.
>>> Still can't connect when the modem is plugged after ofonod is started.
>>> I can send the logs if anyone thinks it's useful.
>>>
>>
>> Sorry to hear you're having trouble.  Kalle reported similar issues were
>> fixed with his patches on the E1552.  Sending the logs would probably be
>> helpful.
> 
> Here are (attached) the logs. I turned off connman. The two tests scenarios are:
> 
> Test A (connect-modem-after-fast.log)
> 
> - start ofono
> - plug the modem
> - call enable-modem just after inserting the modem
> 
> Test B (connect-modem-after-slow.log)
> 
> - start ofono
> - plug the modem
> - wait until the modem led switches from green to blue
> - call enable-modem after some seconds
> 
> The second scenario is what happens when connmand is running, and is
> the most common use case: someone plugs in the modem with the system
> running.

It seems you forgot to include the actual logs.

Regards,
-Denis