From: Zachary Amsden <zamsden@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org, Avi Kivity <avi@redhat.com>
Subject: Re: KVM timekeeping and TSC virtualization
Date: Tue, 24 Aug 2010 18:04:57 -1000 [thread overview]
Message-ID: <4C749669.9050204@redhat.com> (raw)
In-Reply-To: <20100824221301.GA12173@amt.cnet>
On 08/24/2010 12:13 PM, Marcelo Tosatti wrote:
> On Thu, Aug 19, 2010 at 10:07:14PM -1000, Zachary Amsden wrote:
>
>> This patch set implements full TSC virtualization, with both
>> trapping and passthrough modes, and intelligent mode switching.
>> As a result, TSC will never go backwards, we are stable against
>> guest re-calibration attempts, VM reset, and migration. For guests
>> which require it, the TSC khz can even be preserved on migration
>> to a new host.
>>
>> The TSC will never be trapped on UP systems unless the host TSC
>> actually runs faster than the guest; other conditions, including
>> bad hardware and changing speeds are accomodated by using catchup
>> mode to keep the guest passthrough TSC in line with the host clock.
>>
>> What is still needed on top of this is a way to force TSC
>> trapping, or disable it entirely, for benchmarking purposes.
>> I refrained from adding that last bit because it wasn't clear
>> whether the best thing to do is a global 'force TSC trapping' /
>> 'force TSC passthrough' / 'intelligent choice', or if this control
>> should be on a per-VM level, via an ioctl(), module parameter,
>> or sysfs.
>>
>> John and Thomas I have cc'd on this because it may be relevant to
>> their interests and I always appreciate feedback, especially on
>> a change set as large and complex as this.
>>
>> Enjoy. This time, there are no howler monkeys. I've included
>> all the feedback I got from previous rounds of this and more.
>>
> Applied 1-19, thanks.
>
>
Great, thanks. I'll wait for more feedback on the rest and rebase.
prev parent reply other threads:[~2010-08-25 4:05 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-20 8:07 KVM timekeeping and TSC virtualization Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 01/35] Drop vm_init_tsc Zachary Amsden
2010-08-20 16:54 ` Glauber Costa
2010-08-20 8:07 ` [KVM timekeeping 02/35] Convert TSC writes to TSC offset writes Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 03/35] Move TSC offset writes to common code Zachary Amsden
2010-08-20 17:06 ` Glauber Costa
2010-08-24 0:51 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 04/35] Fix SVM VMCB reset Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 05/35] Move TSC reset out of vmcb_init Zachary Amsden
2010-08-20 17:08 ` Glauber Costa
2010-08-24 0:52 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 06/35] TSC reset compensation Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 07/35] Make cpu_tsc_khz updates use local CPU Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 08/35] Warn about unstable TSC Zachary Amsden
2010-08-20 17:28 ` Glauber Costa
2010-08-24 0:56 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 09/35] Unify TSC logic Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 10/35] Fix deep C-state TSC desynchronization Zachary Amsden
2010-08-20 17:30 ` Glauber Costa
2010-09-14 9:10 ` Jan Kiszka
2010-09-14 9:27 ` Avi Kivity
2010-09-14 10:40 ` Jan Kiszka
2010-09-14 10:47 ` Avi Kivity
2010-09-14 19:32 ` Zachary Amsden
2010-09-14 22:26 ` Jan Kiszka
2010-09-14 23:40 ` Zachary Amsden
2010-09-15 5:34 ` Jan Kiszka
2010-09-15 7:55 ` Avi Kivity
2010-09-15 8:04 ` Jan Kiszka
2010-09-15 12:29 ` Glauber Costa
2010-09-15 4:07 ` Zachary Amsden
2010-09-15 8:09 ` Jan Kiszka
2010-09-15 12:32 ` Glauber Costa
2010-09-15 18:27 ` Jan Kiszka
2010-09-17 22:09 ` Zachary Amsden
2010-09-17 22:31 ` Zachary Amsden
2010-09-18 23:53 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 11/35] Add helper functions for time computation Zachary Amsden
2010-08-20 17:34 ` Glauber Costa
2010-08-24 0:58 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 12/35] Robust TSC compensation Zachary Amsden
2010-08-20 17:40 ` Glauber Costa
2010-08-24 1:01 ` Zachary Amsden
2010-08-24 21:33 ` Daniel Verkamp
2010-08-20 8:07 ` [KVM timekeeping 13/35] Perform hardware_enable in CPU_STARTING callback Zachary Amsden
2010-08-27 16:32 ` Jan Kiszka
2010-08-27 23:43 ` Zachary Amsden
2010-08-30 9:10 ` Jan Kiszka
2010-08-20 8:07 ` [KVM timekeeping 14/35] Add clock sync request to hardware enable Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 15/35] Move scale_delta into common header Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 16/35] Fix a possible backwards warp of kvmclock Zachary Amsden
2011-09-02 18:34 ` Philipp Hahn
2011-09-05 14:06 ` [BUG, PATCH-2.6.32] " Philipp Hahn
2011-09-12 11:32 ` Marcelo Tosatti
2010-08-20 8:07 ` [KVM timekeeping 17/35] Implement getnsboottime kernel API Zachary Amsden
2010-08-20 18:39 ` john stultz
2010-08-20 23:37 ` Zachary Amsden
2010-08-21 0:02 ` john stultz
2010-08-21 0:52 ` Zachary Amsden
2010-08-21 1:04 ` john stultz
2010-08-21 1:22 ` Zachary Amsden
2010-08-27 18:05 ` Jan Kiszka
2010-08-27 23:48 ` Zachary Amsden
2010-08-30 18:07 ` Jan Kiszka
2010-08-20 8:07 ` [KVM timekeeping 18/35] Use getnsboottime in KVM Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 19/35] Add timekeeping documentation Zachary Amsden
2010-08-20 17:50 ` Glauber Costa
2010-08-20 8:07 ` [KVM timekeeping 20/35] Make math work for other scales Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 21/35] Track max tsc_khz Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 22/35] Track tsc last write in vcpu Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 23/35] Set initial TSC rate conversion factors Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 24/35] Timer request function renaming Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 25/35] Add clock catchup mode Zachary Amsden
2010-08-25 17:27 ` Marcelo Tosatti
2010-08-25 20:48 ` Zachary Amsden
2010-08-25 22:01 ` Marcelo Tosatti
2010-08-25 23:38 ` Glauber Costa
2010-08-26 0:17 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 26/35] Catchup slower TSC to guest rate Zachary Amsden
2010-09-07 3:44 ` Dong, Eddie
2010-09-07 3:44 ` Dong, Eddie
2010-09-07 22:14 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 27/35] Add TSC trapping Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 28/35] Unstable TSC write compensation Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 29/35] TSC overrun protection Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 30/35] IOCTL for setting TSC rate Zachary Amsden
2010-08-20 17:56 ` Glauber Costa
2010-08-21 16:11 ` Arnd Bergmann
2010-08-20 8:07 ` [KVM timekeeping 31/35] Exit conditions for TSC trapping Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 32/35] Entry " Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 33/35] Indicate reliable TSC in kvmclock Zachary Amsden
2010-08-20 17:45 ` Glauber Costa
2010-08-24 1:14 ` Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 34/35] Remove dead code Zachary Amsden
2010-08-20 8:07 ` [KVM timekeeping 35/35] Add some debug stuff Zachary Amsden
2010-08-20 13:26 ` KVM timekeeping and TSC virtualization David S. Ahern
2010-08-20 23:24 ` Zachary Amsden
2010-08-22 1:32 ` David S. Ahern
2010-08-24 1:44 ` Zachary Amsden
2010-08-24 3:04 ` David S. Ahern
2010-08-24 5:47 ` Zachary Amsden
2010-08-24 13:32 ` David S. Ahern
2010-08-24 23:01 ` Zachary Amsden
2010-08-25 16:55 ` Marcelo Tosatti
2010-08-25 20:32 ` Zachary Amsden
2010-08-24 22:13 ` Marcelo Tosatti
2010-08-25 4:04 ` Zachary Amsden [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C749669.9050204@redhat.com \
--to=zamsden@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.