From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marcus Osdoba Date: Wed, 25 Aug 2010 23:54:03 +0200 Subject: [Buildroot] uImage build error In-Reply-To: References: Message-ID: <4C7590FB.1000700@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Am 25.08.2010 23:41, schrieb Choi, David: > > Hi all, > > I am new to buildroot. The version that I use is v2010.05(stable version) > > As you see the attached, I almost the default value except mips(little > endian mode). > > My Linux version is 2.6.33.5(default version) and configuration is > tb0229_defconfig. > > Whenever I have tried to build uImage, I have gotten an error message > saying "make[1]: *** No rule to make target `uImage`. Stop. > > (Even though I have tried with v2010.08(rc1), I had the same error > message) > Hi, Make sure to run 2010.08(rc1) or higher (there were some patches in the past concerning kernel image building). Please activate the U-Boot bootloader. This should compile a mkimage which will be needed for creating an uImage. >make menuconfig (activate u-boot and/or kernel building if you want this) >make ( Are you trying to run make uImage after deflating? This is not the linux kernel. Buildroot is an independant project. Please read docu page first: http://buildroot.uclibc.org/downloads/buildroot.html ) Regards, Marcus -------------- next part -------------- An HTML attachment was scrubbed... URL: