Dear Keir Fraser, The error message on the BSOD is "Page fault in nonpaged area". Please refer to the kernel debugging messages/log acquired through the Xen serial console below. __ __ _ _ ___ _ \ \/ /___ _ __ | || | / _ \ / | \ // _ \ '_ \ | || |_| | | || | / \ __/ | | | |__ _| |_| || | /_/\_\___|_| |_| |_|(_)___(_)_| (XEN) Xen version 4.0.1 (root@(none)) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) Wed Aug 25 19:04:53 SGT 2010 (XEN) Latest ChangeSet: Wed Aug 25 09:23:31 2010 +0100 21326:07ac5459b250 (XEN) Console output is synchronous. (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: dom0_mem=1024M iommu=1 loglvl=all guest_loglvl=all sync_console console_to_ring com1=115200,8n1 console=com1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 3 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009ec00 (usable) (XEN) 000000000009ec00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000007d67e000 (usable) (XEN) 000000007d67e000 - 000000007d702000 (ACPI NVS) (XEN) 000000007d702000 - 000000007d82a000 (reserved) (XEN) 000000007d82a000 - 000000007d83e000 (ACPI NVS) (XEN) 000000007d83e000 - 000000007d943000 (reserved) (XEN) 000000007d943000 - 000000007d94b000 (ACPI data) (XEN) 000000007d94b000 - 000000007d966000 (ACPI NVS) (XEN) 000000007d966000 - 000000007d988000 (reserved) (XEN) 000000007d988000 - 000000007d98e000 (ACPI NVS) (XEN) 000000007d98e000 - 000000007db00000 (usable) (XEN) 000000007dc00000 - 0000000080000000 (reserved) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000001fc000000 (usable) (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL) (XEN) ACPI: XSDT 7D949E18, 005C (r1 INTEL DQ45CB 5D MSFT 10013) (XEN) ACPI: FACP 7D948D98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013) (XEN) ACPI: DSDT 7D943018, 4B53 (r1 INTEL DQ45CB 5D INTL 20051117) (XEN) ACPI: FACS 7D951F40, 0040 (XEN) ACPI: APIC 7D948F18, 006C (r2 INTEL DQ45CB 5D MSFT 10013) (XEN) ACPI: MCFG 7D953E18, 003C (r1 INTEL DQ45CB 5D MSFT 97) (XEN) ACPI: ASF! 7D952D18, 00A0 (r32 INTEL DQ45CB 5D TFSM F4240) (XEN) ACPI: SPCR 7D953D98, 0050 (r1 INTEL DQ45CB 5D AMI. 3) (XEN) ACPI: TCPA 7D953D18, 0032 (r2 INTEL DQ45CB 5D MSFT 1000013) (XEN) ACPI: DMAR 7D701D98, 0110 (r1 INTEL DQ45CB 5D INTL 1) (XEN) System RAM: 6039MB (6184504kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000001fc000000 (XEN) Domain heap initialised (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] (XEN) ACPI: 32/64X FACS address mismatch in FADT - 7d94cf40/000000007d951f40, using 32 (XEN) ACPI: wakeup_vec[7d94cf4c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: Not using MMCONFIG. (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2800.177 MHz processor. (XEN) Initing memory sharing. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control not supported. (XEN) Intel VT-d DMA Passthrough not supported. (XEN) Intel VT-d Queued Invalidation not supported. (XEN) Intel VT-d Interrupt Remapping not supported. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer appears to have unexpectedly wrapped 10 or more times. (XEN) Platform timer is 3.579MHz ACPI PM Timer ÿ(XEN) Allocated console ring of 16 KiB. (XEN) Brought up 2 CPUs (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x18d0000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000001f0000000->00000001f4000000 (245760 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff818d0000 (XEN) Init. ramdisk: ffffffff818d0000->ffffffff82043c00 (XEN) Phys-Mach map: ffffffff82044000->ffffffff82244000 (XEN) Start info: ffffffff82244000->ffffffff822444b4 (XEN) Page tables: ffffffff82245000->ffffffff8225a000 (XEN) Boot stack: ffffffff8225a000->ffffffff8225b000 (XEN) TOTAL: ffffffff80000000->ffffffff82400000 (XEN) ENTRY ADDRESS: ffffffff8166a200 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .................................................done. (XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65 (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 172kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... ERROR: Unable to locate IOAPIC for GSI 2 ERROR: Unable to locate IOAPIC for GSI 9 ERROR: Unable to locate IOAPIC for GSI 9 (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:03.3 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.2 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 (XEN) PCI add device 00:1f.5 (XEN) PCI add device 01:00.0 (XEN) PCI add device 02:01.0 registering netback %G Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: %G[ OK ] Setting hostname fedora11-x86-64-host: [ OK ] mdadm: No arrays found in config file or automatically Setting up Logical Volume Management: 20 logical volume(s) in volume group "virtualmachines" now active 4 logical volume(s) in volume group "vg_fedora11_host" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/mapper/vg_fedora11_host-lv_root /dev/mapper/vg_fedora11_host-lv_root: clean, 785576/1966080 files, 6514693/7864320 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 82/51200 files, 139260/204800 blocks [/sbin/fsck.ext4 (1) -- /var] fsck.ext4 -a /dev/mapper/vg_fedora11_host-lv_var /dev/mapper/vg_fedora11_host-lv_var: clean, 36201/655360 files, 512419/2621440 blocks [/sbin/fsck.ext4 (1) -- /home] fsck.ext4 -a /dev/mapper/vg_fedora11_host-lv_home /dev/mapper/vg_fedora11_host-lv_home: clean, 31281/655360 files, 2487527/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Applying Intel CPU microcode update: WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-intel, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-original, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-nvidia, it will be ignored in a future release. [ OK ] iptables: Applying firewall rules: [ OK ] WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-intel, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-original, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-nvidia, it will be ignored in a future release. Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Bringing up interface vpn_000: WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-intel, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-original, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-nvidia, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-intel, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-original, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/blacklist.conf-nvidia, it will be ignored in a future release. Device vpn_000 does not seem to be present, delaying initialization. [FAILED] Starting auditd: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting system message bus: [ OK ] Starting acpi daemon: [ OK ] Starting HAL daemon: [ OK ] Starting lm_sensors: loading module coretemp [ OK ] Starting MySQL: [ OK ] Starting clamd.scan: LibClamAV Warning: *********************************************************** LibClamAV Warning: *** This version of the ClamAV engine is outdated. *** LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq *** LibClamAV Warning: *********************************************************** LibClamAV Warning: *********************************************************** LibClamAV Warning: *** This version of the ClamAV engine is outdated. *** LibClamAV Warning: *** DON'T PANIC! Read http://www.clamav.net/support/faq *** LibClamAV Warning: *********************************************************** [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting ntop: [ OK ] Error Opening file ./GeoLiteCity.dat Starting console mouse services: Error Opening file ./GeoIPASNum.dat [ OK ] Starting httpd: httpd: apr_sockaddr_info_get() failed for fedora11-x86-64-host httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [ OK ] Starting mythbackend: [ OK ] Starting crond: [ OK ] [ OK ] Starting boinc-client: [ OK ] Starting Barnyard: Barnyard Version 0.2.0 (Build 32) 3163 [ OK ] Starting OSSEC: 2010/08/26 19:36:33 ossec-maild: INFO: E-Mail notification disabled. Clean Exit. [ OK ] Starting smartd: [ OK ] Starting snort service: 3363 [ OK ] Fedora release 11 (Leonidas) Kernel 2.6.32.19-xen-enming.teo on an x86_64 (/dev/hvc0) ================================================================================ Banner Created on 5th September 2009 A.D. Saturday at 10:57 A.M. SGT This is the home personal computer system of Mr. Teo En Ming Dip(Mechatronics) BEng(Hons)(Mechanical Engineering) Alma Maters: (1) Singapore Polytechnic (2) National University of Singapore Hanyu Pinyin Name: Zhang Enming Age: 31 Email: space.time.universe@gmail.com Mobile Phone: +65-9648-9798 Street: Bedok Reservoir Road Republic of Singapore ================================================================================ fedora11-x86-64-host login: root Password: Last login: Thu Aug 26 16:05:07 on tty1 [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# start-windows + service boinc-client stop Stopping boinc-client: [ OK ] + service snort stop Shutting down snort service: [ OK ] + service barnyard stop Shutting down Barnyard: [ OK ] + service ntop stop Stopping ntop: [ OK ] + service ossec stop Stopping OSSEC: [ OK ] + /etc/xen/scripts/passthru-igd.sh + echo '8086 2e12' + echo 0000:00:02.0 + echo 0000:00:02.0 + /etc/xen/scripts/passthru-firewire.sh + echo '11c1 5811' + echo 0000:02:01.0 + echo 0000:02:01.0 + rmmod firewire_ohci + rmmod firewire_core + /etc/xen/scripts/passthru-audio.sh + echo '8086 3a6e' + echo 0000:00:1b.0 + echo 0000:00:1b.0 + rmmod snd_hda_intel + ls -ltr /sys/bus/pci/drivers/pci-stub/ total 0 --w------- 1 root root 4096 2010-08-26 19:37 unbind --w------- 1 root root 4096 2010-08-26 19:37 new_id --w------- 1 root root 4096 2010-08-26 19:37 bind --w------- 1 root root 4096 2010-08-26 19:37 uevent --w------- 1 root root 4096 2010-08-26 19:37 remove_id lrwxrwxrwx 1 root root 0 2010-08-26 19:37 0000:02:01.0 -> ../../../../devices/pci0000:00/0000:00:1e.0/0000:02:01.0 lrwxrwxrwx 1 root root 0 2010-08-26 19:37 0000:00:1b.0 -> ../../../../devices/pci0000:00/0000:00:1b.0 lrwxrwxrwx 1 root root 0 2010-08-26 19:37 0000:00:02.0 -> ../../../../devices/pci0000:00/0000:00:02.0 + sleep 5 + xm create winxphome32 Using config file "/etc/xen/winxphome32". (XEN) domctl.c:1035:d0 ioport_map:add f_gport=3b0 f_mport=3b0 np=c (XEN) domctl.c:1035:d0 ioport_map:add f_gport=3c0 f_mport=3c0 np=20 (XEN) domctl.c:979:d0 memory_map:add: gfn=a0 mfn=a0 nr_mfns=20 (XEN) HVM1: HVM Loader Started domain winxphome32 (id=1)(XEN) HVM1: Detected Xen v4.0.1 (XEN) HVM1: CPU speed is 2800 MHz (XEN) irq.c:243: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:243: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:243: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:243: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 You have new mail in /var/spool/mail/root [root@fedora11-x86-64-host ~]# (XEN) HVM1: pci dev 01:2 INTD->IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 02:0 INTA->IRQ11 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: pci dev 04:0 INTA->IRQ5 (XEN) domctl.c:979:d0 memory_map:add: gfn=e0000 mfn=b0000 nr_mfns=10000 (XEN) HVM1: pci dev 02:0 bar 18 size 10000000: e000000c (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f0000008 (XEN) domctl.c:979:d0 memory_map:add: gfn=f1000 mfn=d3400 nr_mfns=400 (XEN) HVM1: pci dev 02:0 bar 10 size 00400000: f1000004 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f1400000 (XEN) HVM1: pci dev 01:2 bar 20 size 00000020: 0000c201 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c221 (XEN) domctl.c:1035:d0 ioport_map:add f_gport=c230 f_mport=e220 np=8 (XEN) HVM1: pci dev 02:0 bar 20 size 00000008: 0000c231 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: - CPU1 ... 36-bit phys ... fixed MTRRs ... var MTRRs [3/8] ... done. (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 10524 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc00291c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading VGABIOS of passthroughed gfx ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc002c00-fc012d1f (XEN) HVM1: vm86 TSS at fc013000 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-cc7ff: VGA BIOS (XEN) HVM1: cc800-d8fff: Etherboot ROM (XEN) HVM1: eb000-eb167: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: *** int 15h function AX=5f21, BX=c000 not yet supported! (XEN) HVM1: *** int 15h function AX=5f22, BX=0004 not yet supported! (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata0-0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 (XEN) HVM1: ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (51200 MBytes) (XEN) HVM1: IDE time out (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) HVM1: PCI BIOS: PCI not present (XEN) HVM1: (XEN) HVM1: (XEN) HVM1: Press F12 for boot menu. (XEN) HVM1: (XEN) HVM1: Booting from Hard Disk... (XEN) HVM1: Booting from 0000:7c00 (XEN) HVM1: PCI BIOS: PCI not present (XEN) HVM1: int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM1: *** int 15h function AX=e980, BX=0069 not yet supported! (XEN) irq.c:243: Dom1 PCI link 0 changed 5 -> 0 (XEN) irq.c:243: Dom1 PCI link 1 changed 10 -> 0 (XEN) irq.c:243: Dom1 PCI link 2 changed 11 -> 0 (XEN) irq.c:243: Dom1 PCI link 3 changed 5 -> 0 (XEN) domctl.c:989:d0 memory_map:remove: gfn=f1000 mfn=d3400 nr_mfns=400 (XEN) domctl.c:989:d0 memory_map:remove: gfn=e0000 mfn=b0000 nr_mfns=10000 (XEN) domctl.c:1059:d0 ioport_map:remove f_gport=c230 f_mport=e220 np=8 (XEN) domctl.c:979:d0 memory_map:add: gfn=f1000 mfn=d3400 nr_mfns=400 (XEN) domctl.c:979:d0 memory_map:add: gfn=e0000 mfn=b0000 nr_mfns=10000 (XEN) domctl.c:1035:d0 ioport_map:add f_gport=c230 f_mport=e220 np=8 (XEN) grant_table.c:1121:d1 Expanding dom (1) grant table from (4) to (32) frames. (XEN) irq.c:309: Dom1 callback via changed to GSI 28 [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# [root@fedora11-x86-64-host ~]# reboot  Broadcast message from root@fedora11-x86-64-host (/dev/hvc0) at 19:42 ... The system is going down for reboot NOW! Yours sincerely, Mr. Teo En Ming (Zhang Enming) Citizenship: Singapore Citizen/Singaporean Facebook account: Teo En Ming (Zhang Enming) Facebook link: http://www.facebook.com/profile.php?id=100000750083982 Facebook photos: http://www.facebook.com/profile.php?id=100000750083982#!/profile.php?id=100000750083982&v=photos Facebook videos: http://www.facebook.com/profile.php?id=100000750083982&v=app_2392950137 Mobile Phone (Starhub pre-paid): +65-8369-2618 Windows Live Messenger: teoenming at hotmail.com Location: Bedok Reservoir Road, Singapore ZIP: 470103 My Open Letter (Plea for Medical Help/Assistance) to World Leaders:- http://lists.mcs.anl.gov/pipermail/mpich-discuss/2010-August/007693.html http://lists.fedoraproject.org/pipermail/users/2010-August/380213.html http://mythtv.org/pipermail/mythtv-users/2010-August/294733.html Photo of Mr. Teo En Ming (Zhang Enming) of Singapore: http://img7.uploadhouse.com/fileuploads/6074/6074897a77d2320fd67b332fa4cd1f7078ee316.jpg On 08/26/2010 03:30 PM, Keir Fraser wrote: > On 26/08/2010 08:07, "Mr. Teo En Ming (Zhang Enming) of Singapore" > wrote: > > >> Dear Keir Fraser, >> >> You could find my logs in the thread series "[Xen-devel] Xen patches >> merged to upstream Linux 2.6.36, plans for 2.6.37?". >> >> http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01497.html >> > Thanks. There's really nothing of note in the logs. Debugging a black screen > remotely, and VGA passthru in general, is hard. If you're lucky someone from > Intel on the list might offer some help, but I think this just illustrates > how hit-and-miss VGA paasthru is even for a supposedly working setup (IGD). > Small changes to BIOS, or chipset revision, can make all the difference. > > K. > > >> Thank you very much. >> >> Yours sincerely, >> >> Mr. Teo En Ming (Zhang Enming) >> Citizenship: Singapore Citizen/Singaporean >> Facebook account: Teo En Ming (Zhang Enming) >> Facebook link: http://www.facebook.com/profile.php?id=100000750083982 >> Facebook photos: >> http://www.facebook.com/profile.php?id=100000750083982#!/profile.php?id=100000 >> 750083982&v=photos >> Facebook videos: >> http://www.facebook.com/profile.php?id=100000750083982&v=app_2392950137 >> Mobile Phone (Starhub pre-paid): +65-8369-2618 >> Windows Live Messenger: teoenming at hotmail.com >> Location: Bedok Reservoir Road, Singapore >> ZIP: 470103 >> My Open Letter (Plea for Medical Help/Assistance) to World Leaders:- >> http://lists.mcs.anl.gov/pipermail/mpich-discuss/2010-August/007693.html >> http://lists.fedoraproject.org/pipermail/users/2010-August/380213.html >> http://mythtv.org/pipermail/mythtv-users/2010-August/294733.html >> Photo of Mr. Teo En Ming (Zhang Enming) of Singapore: >> http://i.imgur.com/LAml2.jpg >> >> >> >> >> >> On 08/25/2010 11:44 PM, Keir Fraser wrote: >> >>> On 25/08/2010 14:41, "Mr. Teo En Ming (Zhang Enming) of Singapore" >>> wrote: >>> >>> >>> >>>> Dear Keir Fraser, >>>> >>>> I have just upgraded from Xen 4.0.1-rc6-pre to Xen 4.0.1-RELEASE. I am >>>> still getting Windows XP Home Edition HVM domU crashes when doing the >>>> onboard Intel integrated graphics VGA passthrough, despite the upgrade. >>>> >>>> >>> Noone is going to want to watch your 10-minute videos. You're at least more >>> likely to get assistance if you send logs or, where that's not possible, >>> links to still photos of things like BSODs. >>> >>> -- Keir >>> >>> >>> >>>> I have just made a 7-minute video demonstrating the crash and uploaded >>>> it to my Youtube account, which has 22 videos at the time of this writing. >>>> >>>> Please watch my Youtube video at the following link. >>>> >>>> http://www.youtube.com/watch?v=mI67TjpSO5k >>>> >>>> Please also read through the other thread entitled "[Xen-devel] Xen >>>> patches merged to upstream Linux 2.6.36, plans for 2.6.37?" at the >>>> following link. >>>> >>>> http://lists.xensource.com/archives/html/xen-devel/2010-08/msg01497.html >>>> >>>> There's my 10-minute video demonstrating the crash/BSOD of Windows XP >>>> Home Edition HVM domU when doing Intel integrated graphics VGA >>>> passthrough with Xen 4.0.1-rc6-pre and pv-ops dom0 kernel 2.6.32.19, as >>>> well as kernel debugging messages and system configuration files. >>>> >>>> Yours sincerely, >>>> >>>> Mr. Teo En Ming (Zhang Enming) >>>> Citizenship: Singapore Citizen/Singaporean >>>> Facebook account: Teo En Ming (Zhang Enming) >>>> Facebook link:http://www.facebook.com/profile.php?id=100000750083982 >>>> Facebook photos: >>>> >>>> http://www.facebook.com/profile.php?id=100000750083982#!/profile.php?id=1000 >>>> 00 >>>> 750083982&v=photos >>>> >>> 00 >>>> 000750083982&v=photos> >>>> >>>> >>>> Facebook videos: >>>> http://www.facebook.com/profile.php?id=100000750083982&v=app_2392950137 >>>> >>>> Mobile Phone (Starhub pre-paid): +65-8369-2618 >>>> Windows Live Messenger: teoenming at hotmail.com >>>> Location: Bedok Reservoir Road, Singapore >>>> ZIP: 470103 >>>> My Open Letter (Plea for Medical Help/Assistance) to World Leaders:- >>>> http://lists.mcs.anl.gov/pipermail/mpich-discuss/2010-August/007693.html >>>> http://lists.fedoraproject.org/pipermail/users/2010-August/380213.html >>>> http://mythtv.org/pipermail/mythtv-users/2010-August/294733.html >>>> Photo of Mr. Teo En Ming (Zhang Enming) of Singapore: >>>> http://i38.tinypic.com/2a6pp4z.jpg >>>> >>>> >>>> >>>> On 08/25/2010 04:32 PM, Keir Fraser wrote: >>>> >>>> >>>>> Folks, >>>>> >>>>> RELEASE-4.0.1 has been tagged in http://xenbits.xen.org/xen-4.0-testing.hg >>>>> >>>>> Browsing the above URL will show the mercurial changelog contains many many >>>>> bug fixes since 4.0.0. We recommend all users to upgrade. >>>>> >>>>> A source tarball will soon be available from >>>>> http://www.xen.org/products/xen_source.html >>>>> >>>>> -- Keir >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Xen-devel mailing list >>>>> Xen-devel@lists.xensource.com >>>>> http://lists.xensource.com/xen-devel >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> > > >