From: Greg Ungerer <gerg@snapgear.com>
To: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: uClinux development list <uclinux-dev@uclinux.org>,
linux-kernel@vger.kernel.org
Subject: Re: [uClinux-dev] [PATCH] m68k{nommu} : Remove unused DEFINE's from asm-offsets.c
Date: Mon, 30 Aug 2010 15:30:35 +1000 [thread overview]
Message-ID: <4C7B41FB.3020406@snapgear.com> (raw)
In-Reply-To: <AANLkTi=c+brmSOjVQhhTngRFezfyrAooZRhcCg9kFw4m@mail.gmail.com>
Geert Uytterhoeven wrote:
> On Fri, Aug 27, 2010 at 08:08, Greg Ungerer <gerg@snapgear.com> wrote:
>> Philippe De Muyter wrote:
>>> m68k{nommu}/asm-offsets.c define many constants which are not used
>>> anymore anywhere; remove IRQ_DEVID, IRQ_HANDLER, IRQ_NEXT, STAT_IRQ,
>>> TASK_ACTIVE_MM, TASK_BLOCKED, TASK_FLAGS, TASK_PTRACE, TASK_STATE,
>>> TASK_THREAD_INFO, TI_CPU, TI_EXECDOMAIN and TI_TASK.
>>>
>>> Signed-off-by: Philippe De Muyter <phdm@macqel.be>
>> I have no problem with the m68knommu part. I can push that into
>> the m68knommu git tree. Or if the m68k guys are happy I can put
>> the whole thing there?
>
> The m68k part is fine, too.
>
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Thanks Geert. I have pushed this into the m68knommu git tree.
Regards
Greg
>
>>> ---
>>> arch/m68k/kernel/asm-offsets.c | 12 ------------
>>> arch/m68knommu/kernel/asm-offsets.c | 9 ---------
>>> 2 files changed, 0 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/arch/m68k/kernel/asm-offsets.c
>>> b/arch/m68k/kernel/asm-offsets.c
>>> index 73e5e58..78e59b8 100644
>>> --- a/arch/m68k/kernel/asm-offsets.c
>>> +++ b/arch/m68k/kernel/asm-offsets.c
>>> @@ -22,13 +22,9 @@
>>> int main(void)
>>> {
>>> /* offsets into the task struct */
>>> - DEFINE(TASK_STATE, offsetof(struct task_struct, state));
>>> - DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
>>> - DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
>>> DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
>>> DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
>>> DEFINE(TASK_MM, offsetof(struct task_struct, mm));
>>> - DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
>>> #ifdef CONFIG_MMU
>>> DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
>>> #endif
>>> @@ -64,14 +60,6 @@ int main(void)
>>> /* bitfields are a bit difficult */
>>> DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
>>> - /* offsets into the irq_handler struct */
>>> - DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
>>> - DEFINE(IRQ_DEVID, offsetof(struct irq_node, dev_id));
>>> - DEFINE(IRQ_NEXT, offsetof(struct irq_node, next));
>>> -
>>> - /* offsets into the kernel_stat struct */
>>> - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
>>> -
>>> /* offsets into the irq_cpustat_t struct */
>>> DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t,
>>> __softirq_pending));
>>> diff --git a/arch/m68knommu/kernel/asm-offsets.c
>>> b/arch/m68knommu/kernel/asm-offsets.c
>>> index 9a8876f..eca508c 100644
>>> --- a/arch/m68knommu/kernel/asm-offsets.c
>>> +++ b/arch/m68knommu/kernel/asm-offsets.c
>>> @@ -21,14 +21,8 @@
>>> int main(void)
>>> {
>>> /* offsets into the task struct */
>>> - DEFINE(TASK_STATE, offsetof(struct task_struct, state));
>>> - DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
>>> - DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
>>> - DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
>>> DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
>>> - DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
>>> DEFINE(TASK_MM, offsetof(struct task_struct, mm));
>>> - DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
>>> /* offsets into the irq_cpustat_t struct */
>>> DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t,
>>> __softirq_pending));
>>> @@ -77,11 +71,8 @@ int main(void)
>>> DEFINE(THREAD_SIZE, THREAD_SIZE);
>>> /* Offsets in thread_info structure */
>>> - DEFINE(TI_TASK, offsetof(struct thread_info, task));
>>> - DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
>>> DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
>>> DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info,
>>> preempt_count));
>>> - DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
>>> return 0;
>>> }
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
>
--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
prev parent reply other threads:[~2010-08-30 5:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-18 16:27 [PATCH] m68k{nommu} : Remove unused DEFINE's from asm-offsets.c Philippe De Muyter
2010-08-27 6:08 ` [uClinux-dev] " Greg Ungerer
2010-08-27 7:42 ` Geert Uytterhoeven
2010-08-30 5:30 ` Greg Ungerer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C7B41FB.3020406@snapgear.com \
--to=gerg@snapgear.com \
--cc=geert@linux-m68k.org \
--cc=linux-kernel@vger.kernel.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.