From: Sergei Shtylyov <sshtylyov@mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] DockStar: LED support
Date: Wed, 08 Sep 2010 14:24:47 +0400 [thread overview]
Message-ID: <4C87646F.4020008@mvista.com> (raw)
In-Reply-To: <1283869696-10077-6-git-send-email-ecc@cmu.edu>
Hello.
On 07-09-2010 18:28, Eric Cooper wrote:
> derived from patches posted by Jeff Doozan
> in the uBoot forum at http://forum.doozan.com
> Signed-off-by: Eric Cooper<ecc@cmu.edu>
[...]
> diff --git a/board/Marvell/dockstar/dockstar.c b/board/Marvell/dockstar/dockstar.c
> index 13cd347..7788837 100644
> --- a/board/Marvell/dockstar/dockstar.c
> +++ b/board/Marvell/dockstar/dockstar.c
> @@ -153,3 +153,33 @@ void reset_phy(void)
> printf("88E1116 Initialized on %s\n", name);
> }
> #endif /* CONFIG_RESET_PHY_R */
> +
> +#define GREEN_LED (1<< 14)
> +#define ORANGE_LED (1<< 15)
> +#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
> +#define NEITHER_LED 0
> +
> +static void set_leds(u32 leds, u32 blinking)
> +{
> + struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
> + u32 oe = readl(&r->oe) | BOTH_LEDS;
> + writel(oe& ~leds,&r->oe); /* active low */
> + u32 bl = readl(&r->blink_en)& ~BOTH_LEDS;
> + writel(bl | blinking,&r->blink_en);
> +}
> +
> +void show_boot_progress(int val)
> +{
> + switch (val) {
> + case 15: /* booting Linux */
*case* should be aligned with *switch*. Don't align using spaces.
> + set_leds(BOTH_LEDS, NEITHER_LED);
> + break;
> + case 64: /* Ethernet initialization */
> + set_leds(GREEN_LED, GREEN_LED);
> + break;
> + default:
> + if (val < 0) /* error */
> + set_leds(ORANGE_LED, ORANGE_LED);
> + break;
> + }
> +}
WBR, Sergei
next prev parent reply other threads:[~2010-09-08 10:24 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-07 14:28 [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Eric Cooper
2010-09-07 14:28 ` [U-Boot] [PATCH 1/5] add DOCKSTAR machine type Eric Cooper
2010-09-07 15:07 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 2/5] DockStar: board support (derived from sheevaplug) Eric Cooper
2010-09-07 15:11 ` Wolfgang Denk
[not found] ` <20100908010601.GG8903@localhost>
2010-09-08 10:19 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 3/5] DockStar: change RAM definitions to one bank (128 MB) Eric Cooper
2010-09-07 15:12 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 4/5] DockStar: config Eric Cooper
2010-09-07 15:52 ` Wolfgang Denk
2010-09-07 14:28 ` [U-Boot] [PATCH 5/5] DockStar: LED support Eric Cooper
2010-09-07 15:53 ` Wolfgang Denk
2010-09-08 10:24 ` Sergei Shtylyov [this message]
2010-09-27 9:07 ` [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Thomas Weber
2010-09-27 9:36 ` [U-Boot] How to debug u-boot with GDB & BDI3000 sywang
2010-09-27 10:08 ` Wolfgang Denk
2010-09-28 4:20 ` sywang
2010-09-27 11:03 ` [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar Eric Cooper
2010-10-20 14:54 ` [U-Boot] [PATCH v2] Seagate FreeAgent DockStar support Eric Cooper
2010-10-21 4:52 ` Prafulla Wadaskar
2010-10-21 15:01 ` Eric Cooper
2010-10-21 15:07 ` Wolfgang Denk
2010-10-21 6:17 ` Wolfgang Denk
2010-10-21 6:26 ` Prafulla Wadaskar
2010-10-21 6:35 ` Wolfgang Denk
2010-10-21 6:38 ` [U-Boot] [RFC] [PATCH] kirkwood: get rid of config.mk files Wolfgang Denk
2010-10-21 7:43 ` Prafulla Wadaskar
2010-10-21 8:21 ` Wolfgang Denk
2010-10-21 8:37 ` Prafulla Wadaskar
2010-10-21 9:34 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C87646F.4020008@mvista.com \
--to=sshtylyov@mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.