All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Torquil Macdonald Sørensen" <torquil@gmail.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] AR9285: Possible intermittent connection drop-outs
Date: Wed, 08 Sep 2010 18:33:16 +0200	[thread overview]
Message-ID: <4C87BACC.6020503@gmail.com> (raw)
In-Reply-To: <AANLkTimEVJwVsGrsDkhCp6vA6auqYqP6913_RQse=zRR@mail.gmail.com>

On 23/08/10 14:05, Mohammed Shafi wrote:
> Hi Torquil,
>
>                  Thanks for your ath9k debug messages .I tested the
> ath9k driver in 2.6.35.2
>
> with D-LINK DIR655  router  in ubunt 10.04 , but could not    reproduce
> the issue .I got  all
>
> of  your   similar debugging  messages(invalid cmd 2  several times
> ,cycle count
>
> ,ofdm,cck etc   under healthy connection( which you had  suspected for
> the connection loss ).
>
>                I think those were mainly  (modulation schemes ofdm ,cck ).
>
> while cmd is related to ANI information (enum ath9k_ani_cmd in ani.h).
>
>
> I had got these things under healthy connection ,
>
>   6464.669170] ath: Writing ofdmbase=12582412   cckbase=12582712
> [ 6464.728750] ath: invalid cmd 2
>
>   Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264144] ath: ANI parameters:
> 1994 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264149] ath:
> noiseImmunityLevel=0, spurImmunityLevel=7, ofdmWeakSigDetectOff=0
> 1995 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264156] ath:
> cckWeakSigThreshold=0, firstepLevel=2, listenTime=78
> 1996 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264163] ath:
> cycleCount=1452171193, ofdmPhyErrCount=436, cckPhyErrCount=14
> 1997 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264169]
> 1998 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264176] ath: ANI
> parameters:
> 1999 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264181] ath:
> noiseImmunityLevel=0, spurImmunityLevel=7, ofdmWeakSigDetectOff=0
> 2000 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264188] ath:
> cckWeakSigThreshold=0, firstepLevel=2, listenTime=78
> 2001 Aug 23 16:35:51 atheros-laptop kernel: [ 6345.264195] ath:
> cycleCount=1452171193, ofdmPhyErrCount=436, cckPhyErrCount=14
>
>
>
>                         I hope that enabling ATH_DBG_FATAL will give us
> some some clear idea.
>
> If you obtain the ath9k debug messages with ATH_DBG_FATAL please do send
> as soon
>
> as you get it.

Unfortunately, I get no debug output from the FATAL debugging when the problems 
come and go. I also discovered that the same problem persists even when using no 
encryption/authentication on the network.

In addition, this is an area with little to no other wireless networks, and 
problems persists even when I am the only user of the network.

Using Linux 2.6.35.4 at the moment.

Sometimes I get:

ath: tx hung, resetting the chip
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020

but I suspect that it is not related to my problems.

Best regards
Torquil S?rensen

  parent reply	other threads:[~2010-09-08 16:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-17 16:10 [ath9k-devel] AR9285: Possible intermittent connection drop-outs Torquil Macdonald Sørensen
2010-08-18 15:20 ` Peter Stuge
2010-08-18 17:08 ` Alan
2010-08-18 23:34   ` Ben Gamari
2010-08-19  0:59   ` Peter Stuge
2010-08-19  1:22   ` Adrian Chadd
2010-08-19 23:43     ` Torquil Macdonald Sørensen
2010-08-20  0:40       ` Adrian Chadd
     [not found] ` <AANLkTik=6gKT7+eXc8H9fGfWJ6egD5bm8CMzTJivbP7Z@mail.gmail.com>
2010-08-21 12:52   ` Torquil Macdonald Sørensen
     [not found]   ` <4C6FC95C.4090703@gmail.com>
     [not found]     ` <AANLkTimEVJwVsGrsDkhCp6vA6auqYqP6913_RQse=zRR@mail.gmail.com>
2010-08-23 15:20       ` Torquil Macdonald Sørensen
2010-09-08 16:33       ` Torquil Macdonald Sørensen [this message]
  -- strict thread matches above, loose matches on Subject: below --
2010-11-20 10:18 Dan Borlovan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4C87BACC.6020503@gmail.com \
    --to=torquil@gmail.com \
    --cc=ath9k-devel@lists.ath9k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.