From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:51282 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753652Ab0IOUOs (ORCPT ); Wed, 15 Sep 2010 16:14:48 -0400 Message-ID: <4C912935.7010109@iki.fi> Date: Wed, 15 Sep 2010 23:14:45 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Gregory Orange CC: linux-media@vger.kernel.org Subject: Re: Leadtek DTV2000DS remote References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit List-ID: Sender: Leadtek WinFast DTV2000DS remote is not supported at all. Leadtek WinFast DTV Dongle Gold remote is. If you can compile and install latest drivers from http://git.linuxtv.org/anttip/media_tree.git af9015 tree I can add support for that remote rather easily. Antti On 09/15/2010 10:45 AM, Gregory Orange wrote: > Shall I assume that noone has had any experience with one of these > devices? From some input from other sources, I'm now not sure if I > lack a kernel module, or perhaps the firmware for this device isn't > supported (or somesuch - a bit confused on that). > > In any case, pretty well everything is now working including EIT at > last. The remote is all I lack. I have no idea who else to ask or what > to try, so I may try borrowing a different remote. I'm all Googled out > (: > > Regards, > Greg. > > On 9 September 2010 22:11, Gregory Orange wrote: >> Hi all, first post. >> >> I have a newly purchased Leadtek DTV2000DS dual tuner card in my >> machine, configured and running in Mythbuntu 10.04 (after installing >> latest v4l-dvb from source). I am having a bit of trouble getting the >> supplied remote control working. Is anyone here able to assist? I >> asked on the LIRC sf.net list and after a bit of back and forth I was >> directed to see if you guys can help me. In particular I wonder if the >> author of dvb_usb_af9015 and af9013 is around - hmm, seems to be Antti >> Palosaari, who seems to be a fairly recent poster. Don't get me wrong >> though - anyone who can assist would be great (: >> >> I have confirmed that the hardware works - I installed the drivers in >> a Windows boot, and the remote works. >> >> In terms of driver support I'm not sure exactly what I'm looking for, >> but there is this line in dmesg: >> [ 22.263721] input: IR-receiver inside an USB DVB receiver as >> /devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5 >> >> cat /proc/bus/input/devices yields >> I: Bus=0003 Vendor=0413 Product=6a04 Version=0200 >> N: Name="IR-receiver inside an USB DVB receiver" >> P: Phys=usb-0000:02:0a.2-1/ir0 >> S: Sysfs=/devices/pci0000:00/0000:00:0e.0/0000:02:0a.2/usb2/2-1/input/input5 >> U: Uniq= >> H: Handlers=kbd event5 >> B: EV=3 >> B: KEY=108fc310 2802891 0 0 0 0 118000 200180 4803 e1680 0 100000 ffe >> >> So I've been using /dev/input/event5 in my tests. I have tried using >> evtest, mode2, and irw to no avail. I get no indication of any signal >> coming from the remote. Am I missing a kernel driver module? Any >> further advice or specific experience with this device would be >> gratefully welcomed. >> >> Cheers, >> Greg. >> >> -- >> Gregory Orange >> > > > -- http://palosaari.fi/