From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless <linux-wireless@vger.kernel.org>
Cc: "Luis R. Rodriguez" <lrodriguez@atheros.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [PATCH] ath9k: fix channel flag / regd issues with multiple cards
Date: Fri, 01 Oct 2010 01:06:53 +0200 [thread overview]
Message-ID: <4CA5180D.3010702@openwrt.org> (raw)
Since the regulatory code touches the channel array, it needs to be
copied for each device instance. That way the original channel array
can also be made const.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org [all]
---
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -57,7 +57,7 @@ MODULE_PARM_DESC(blink, "Enable LED blin
* on 5 MHz steps, we support the channels which we know
* we have calibration data for all cards though to make
* this static */
-static struct ieee80211_channel ath9k_2ghz_chantable[] = {
+static const struct ieee80211_channel ath9k_2ghz_chantable[] = {
CHAN2G(2412, 0), /* Channel 1 */
CHAN2G(2417, 1), /* Channel 2 */
CHAN2G(2422, 2), /* Channel 3 */
@@ -78,7 +78,7 @@ static struct ieee80211_channel ath9k_2g
* on 5 MHz steps, we support the channels which we know
* we have calibration data for all cards though to make
* this static */
-static struct ieee80211_channel ath9k_5ghz_chantable[] = {
+static const struct ieee80211_channel ath9k_5ghz_chantable[] = {
/* _We_ call this UNII 1 */
CHAN5G(5180, 14), /* Channel 36 */
CHAN5G(5200, 15), /* Channel 40 */
@@ -478,10 +478,17 @@ err:
return -EIO;
}
-static void ath9k_init_channels_rates(struct ath_softc *sc)
+static int ath9k_init_channels_rates(struct ath_softc *sc)
{
+ void *channels;
+
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+ channels = kmemdup(ath9k_2ghz_chantable,
+ sizeof(ath9k_2ghz_chantable), GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ sc->sbands[IEEE80211_BAND_2GHZ].channels = channels;
sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
ARRAY_SIZE(ath9k_2ghz_chantable);
@@ -491,7 +498,15 @@ static void ath9k_init_channels_rates(st
}
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
- sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
+ channels = kmemdup(ath9k_5ghz_chantable,
+ sizeof(ath9k_5ghz_chantable), GFP_KERNEL);
+ if (!channels) {
+ if (sc->sbands[IEEE80211_BAND_2GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels);
+ return -ENOMEM;
+ }
+
+ sc->sbands[IEEE80211_BAND_5GHZ].channels = channels;
sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
ARRAY_SIZE(ath9k_5ghz_chantable);
@@ -500,6 +515,7 @@ static void ath9k_init_channels_rates(st
sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
ARRAY_SIZE(ath9k_legacy_rates) - 4;
}
+ return 0;
}
static void ath9k_init_misc(struct ath_softc *sc)
@@ -602,8 +618,11 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
goto err_btcoex;
+ ret = ath9k_init_channels_rates(sc);
+ if (ret)
+ goto err_btcoex;
+
ath9k_init_crypto(sc);
- ath9k_init_channels_rates(sc);
ath9k_init_misc(sc);
return 0;
@@ -784,6 +803,12 @@ static void ath9k_deinit_softc(struct at
{
int i = 0;
+ if (sc->sbands[IEEE80211_BAND_2GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels);
+
+ if (sc->sbands[IEEE80211_BAND_5GHZ].channels)
+ kfree(sc->sbands[IEEE80211_BAND_5GHZ].channels);
+
if ((sc->btcoex.no_stomp_timer) &&
sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
next reply other threads:[~2010-09-30 23:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-30 23:06 Felix Fietkau [this message]
2010-09-30 23:37 ` [PATCH] ath9k: fix channel flag / regd issues with multiple cards Felix Fietkau
2010-10-01 14:51 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA5180D.3010702@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.