From: Felix Fietkau <nbd@openwrt.org>
To: linux-wireless <linux-wireless@vger.kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>,
"Luis R. Rodriguez" <lrodriguez@atheros.com>
Subject: [PATCH] ath9k_hw: remove some useless calibration data
Date: Fri, 01 Oct 2010 01:46:13 +0200 [thread overview]
Message-ID: <4CA52145.6050200@openwrt.org> (raw)
The percal struct and bitmask for the initial DC calibration are not
used anywhere, so they can be removed.
Signed-off-by: Felix Fietkau <nbd@openwrt.org
---
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -45,11 +45,6 @@ static void ar9002_hw_setup_calibration(
ath_print(common, ATH_DBG_CALIBRATE,
"starting ADC DC Calibration\n");
break;
- case ADC_DC_INIT_CAL:
- REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
- ath_print(common, ATH_DBG_CALIBRATE,
- "starting Init ADC DC Calibration\n");
- break;
case TEMP_COMP_CAL:
break; /* Not supported */
}
@@ -950,13 +945,6 @@ static const struct ath9k_percal_data ad
ar9002_hw_adc_dccal_collect,
ar9002_hw_adc_dccal_calibrate
};
-static const struct ath9k_percal_data adc_init_dc_cal = {
- ADC_DC_INIT_CAL,
- MIN_CAL_SAMPLES,
- INIT_LOG_COUNT,
- ar9002_hw_adc_dccal_collect,
- ar9002_hw_adc_dccal_calibrate
-};
static void ar9002_hw_init_cal_settings(struct ath_hw *ah)
{
@@ -973,16 +961,12 @@ static void ar9002_hw_init_cal_settings(
&adc_gain_cal_single_sample;
ah->adcdc_caldata.calData =
&adc_dc_cal_single_sample;
- ah->adcdc_calinitdata.calData =
- &adc_init_dc_cal;
} else {
ah->iq_caldata.calData = &iq_cal_multi_sample;
ah->adcgain_caldata.calData =
&adc_gain_cal_multi_sample;
ah->adcdc_caldata.calData =
&adc_dc_cal_multi_sample;
- ah->adcdc_calinitdata.calData =
- &adc_init_dc_cal;
}
ah->supp_cals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
}
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -50,7 +50,6 @@ static void ar9003_hw_setup_calibration(
ath_print(common, ATH_DBG_CALIBRATE,
"starting Temperature Compensation Calibration\n");
break;
- case ADC_DC_INIT_CAL:
case ADC_GAIN_CAL:
case ADC_DC_CAL:
/* Not yet */
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -59,7 +59,6 @@ struct ar5416IniArray {
} while (0)
enum ath9k_cal_types {
- ADC_DC_INIT_CAL = 0x1,
ADC_GAIN_CAL = 0x2,
ADC_DC_CAL = 0x4,
IQ_MISMATCH_CAL = 0x8,
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -692,7 +692,6 @@ struct ath_hw {
enum ath9k_cal_types supp_cals;
struct ath9k_cal_list iq_caldata;
struct ath9k_cal_list adcgain_caldata;
- struct ath9k_cal_list adcdc_calinitdata;
struct ath9k_cal_list adcdc_caldata;
struct ath9k_cal_list tempCompCalData;
struct ath9k_cal_list *cal_list;
reply other threads:[~2010-09-30 23:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA52145.6050200@openwrt.org \
--to=nbd@openwrt.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.