From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4CA8D713.8090900@domain.hid> Date: Sun, 03 Oct 2010 21:18:43 +0200 From: Javier Herrero MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [Adeos-main] Problem with dm9000 and adeos-ipipe-2.6.34-blackfin-1.14-02.patch List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: adeos-main@gna.org Hello, I'm trying adeos on a Blackfin BF532 board with a DM9000 ethernet interface. If ethernet is down (cable disconnected) the system boots and works OK, but as soon as the ethernet cable is plugged, the system apparently hangs. After several seconds, a message dm9000 dm9000.0: status check fail: 226 appears. I've read a previous post about problems with dm9000 and an ARM processor, https://mail.gna.org/public/xenomai-help/2010-03/msg00147.html but it seems that there was not a response. Thank you very much. Best regards, Javier -- ------------------------------------------------------------------------ Javier Herrero EMAIL: jherrero@domain.hid Chief Technology Officer HV Sistemas S.L. PHONE: +34 949 336 806 Los Charcones, 17 FAX: +34 949 336 792 19170 El Casar - Guadalajara - Spain WEB: http://www.hvsistemas.com