From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pramod Subject: Re: beagle hangs in uart3 disabling clocks Date: Tue, 5 Oct 2010 15:04:30 +0530 Message-ID: <4CAAF126.5080206@ti.com> References: <4CA9C5F6.7060902@ti.com> <87wrpy0xp3.fsf@deeprootsystems.com> <87iq1hzt3u.fsf@deeprootsystems.com> <4CAACFFF.9040702@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:53721 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932314Ab0JEJe2 (ORCPT ); Tue, 5 Oct 2010 05:34:28 -0400 In-Reply-To: Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Paul Walmsley Cc: Ming Lei , Kevin Hilman , Govindraj , "Premi, Sanjeev" , "linux-omap@vger.kernel.org" On Tuesday 05 October 2010 12:49 PM, Paul Walmsley wrote: > On Tue, 5 Oct 2010, Pramod wrote: > >> I applied this patch on my kernel which is based on android-2.6.32 e= nabling >> dynamic printks. I still see the console hang after enabling the log= s in >> hwmod. >> >> I am using zoom3 board. Can you please let me know which defconfig f= rom lo >> master branch can be used to test on zoom3? I would like to test thi= s patch >> with lo master branch and zoom3. > > Could you please paste your boot log messages here? > > > - Paul Hi paul, These are the boot log messages. Uncompressing=20 Linux..................................................................= =2E....................................................................= =2E...................... =2E............................................................. done,=20 booting the kernel. Initializing cgroup subsys cpu Linux version 2.6.32.9-00001-g8d10978-dirty (dw@dw-desktop) (gcc versio= n=20 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #23 PREEMPT Tue Oct 5 12:25:20 IS= T=20 2010 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=3D10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: OMAP Zoom3 board Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 131072 free_area_init_node: node 0, pgdat c06c1968, node_mem_map c07cb000 Normal zone: 1024 pages used for memmap Normal zone: 0 pages reserved Normal zone: 130048 pages, LIFO batch:31 DIE ID: 5C320000000000000156087C06005013 OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk ) omap_sam_base (VA) =3D=3D 0xfe400000 omap_sram_start (PA) =3D=3D 0x40200000 omap_sram_size (SIZE) =3D=3D 0x10000 SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000 Reserving 14745600 bytes SDRAM for VRAM Built 1 zonelists in Zone order, mobility grouping on. Total pages: 13= 0048 Kernel command line: console=3DttyO2,115200n8 root=3D/dev/nfs rw=20 nfsroot=3D172.24.137.0:/home/dw/l25.x/25.INC3.1/myfs,nolock,wsize=3D102= 4,rsize=3D1024=20 init=3D/init ip=3Ddhcp videoout=3Domap24xx vout omap_vout.video1_numbuffers=3D6 omap_vout.vid1_static_vrfb_alloc=3D= y=20 omapfb.vram=3D0:4M earlyprintk loglevel=3D8 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB =3D 512MB total Memory: 491008KB available (6180K code, 1352K data, 224K init, 0K highm= em) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .init : 0xc0008000 - 0xc0040000 ( 224 kB) .text : 0xc0040000 - 0xc0649000 (6180 kB) .data : 0xc0674000 - 0xc06ce3d0 ( 361 kB) Hierarchical RCU implementation. NR_IRQS:402 IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts Total of 96 interrupts on 1 active controller Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz Reprogramming SDRC clock to 400000000 Hz GPMC revision 5.0 OMAP GPIO hardware version 2.5 OMAP clockevent source: GPTIMER1 at 32768 Hz Console: colour dummy device 80x30 Calibrating delay loop... 597.64 BogoMIPS (lpj=3D2334720) Mount-cache hash table entries: 512 Initializing cgroup subsys debug Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 mux: Setting signal i2c2_scl.i2c2_scl 0x0118 -> 0x0100 mux: Setting signal i2c2_sda.i2c2_sda 0x0118 -> 0x0100 mux: Setting signal i2c3_scl.i2c3_scl 0x0118 -> 0x0100 mux: Setting signal i2c3_sda.i2c3_sda 0x0118 -> 0x0100 mux: Setting signal uart3_cts_rctx.gpio_163 0x0108 -> 0x011c mux: Setting signal cam_xclka.gpio_96 0x0004 -> 0x0004 mux: Setting signal cam_wen.gpio_167 0x0004 -> 0x0004 mux: Setting signal mcspi1_cs2.mcspi1_cs2 0x0108 -> 0x0108 mux: Setting signal cam_hs.gpio_94 0x010c -> 0x0104 mux: Setting signal cam_xclka.gpio_96 0x0004 -> 0x0004 mux: Setting signal gpmc_ncs5.gpio_56 0x0004 -> 0x0004 mux: Setting signal cam_vs.gpio_95 0x0114 -> 0x0004 mux: Setting signal sys_nirq.sys_nirq 0x0118 -> 0x4118 mux: Setting signal cam_pclk.gpio_97 0x0114 -> 0x011c mux: Setting signal cam_d2.gpio101 0x0104 -> 0x0004 mux: Setting signal mcbsp1_clkx.gpio162 0x011c -> 0x0104 mux: Setting signal etk_clk.etk_clk 0x001b -> 0x011a mux: Setting signal mcspi1_cs1.mcspi1_cs1 0x000b -> 0x011b mux: Setting signal etk_d4.etk_d4 0x0103 -> 0x011a mux: Setting signal etk_d5.etk_d5 0x0103 -> 0x011a mux: Setting signal etk_d6.etk_d6 0x0103 -> 0x011a mux: Setting signal etk_d3.etk_d3 0x0103 -> 0x011a (wl12xx): Connectivity board init (wl12xx): Connectivity board init for OMAP3+WL127x (wl12xx): wl127x_vio_leakage_fix (wl12xx): Adding Connectivity platform device (wl12xx): Configuring Connectivity GPIOs mux: Setting signal cam_d10.gpio109 0x0104 -> 0x0004 mux: Setting signal mcbsp1_fsx.gpio161 0x011c -> 0x0004 mux: Setting signal uart3_rts_sd.gpio164 0x0000 -> 0x0004 OMAP DMA hardware revision 5.0 bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c_omap i2c_omap.1: bus 1 rev4.0 at 100 kHz twl4030: PIH (irq 7) chaining IRQs 368..375 twl4030: power (irq 373) chaining IRQs 376..383 twl4030: gpio (irq 368) chaining IRQs 384..401 mux: Setting signal sdmmc1_clk.sdmmc1_clk 0x0000 -> 0x0118 mux: Setting signal sdmmc1_cmd.sdmmc1_cmd 0x0118 -> 0x0118 mux: Setting signal sdmmc1_dat0.sdmmc1_dat0 0x0118 -> 0x0118 mux: Setting signal sdmmc1_dat1.sdmmc1_dat1 0x0118 -> 0x0118 mux: Setting signal sdmmc1_dat2.sdmmc1_dat2 0x0118 -> 0x0118 mux: Setting signal sdmmc1_dat3.sdmmc1_dat3 0x0118 -> 0x0118 regulator: VUSB1V5: 1500 mV normal standby regulator: VUSB1V8: 1800 mV normal standby regulator: VUSB3V1: 3100 mV normal standby twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 1 twl4030_usb twl4030_usb: Initialized TWL4030 USB module regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby regulator: VDAC: 1800 mV normal standby regulator: VPLL2: 1800 mV normal standby regulator: VMMC2: 1850 mV normal standby regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby i2c_omap i2c_omap.2: bus 2 rev4.0 at 100 kHz i2c_omap i2c_omap.3: bus 3 rev4.0 at 400 kHz Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Switching to clocksource 32k_counter musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=3D0 HS USB OTG: revision 0x40, sysconfig 0x2005, sysstatus 0x1, intrfsel=20 0x1, simenable 0x0 musb_hdrc: ConfigData=3D0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk= =20 split (X), HB-ISO Rx, HB-ISO Tx, SoftConn) musb_hdrc: MHDRC RTL version 1.800 musb_hdrc: setup fifo_mode 4 musb_hdrc: 28/31 max ep, 16384/16384 memory musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. dspbridge_init: 600000 bytes @ 81a00000 zoom2_wifi_init: start omap-iommu omap-iommu.0: isp registered iovmm-omap initialized isp, major: 253, base-minor: 0 ashmem: initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) =EF=BF=BD=C2=A9 2001-2006 Red Hat, Inc. yaffs Oct 5 2010 12:18:21 Installing. msgmni has been set to 959 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) OMAP DSS rev 2.0 OMAP DISPC rev 3.0 OMAP VENC rev 2 dsi_init calling OMAP DSI rev 1.0 omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq =3D 72) is a OMAP UART0 omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq =3D 73) is a OMAP UART1 omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq =3D 74) is a OMAP UART2 console [ttyO2] enabled omap-hsuart.3: ttyO3 at MMIO 0x10000000 (irq =3D 262) is a OMAP UART3 brd: module loaded loop: module loaded Android kernel panic handler initialized (bind=3Dkpanic) <6>LIS331DLH accelerometer driver omap2-nand driver initializing omap2-nand: irqstatus set on cmd entry ff NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB=20 1,8V 16-bit) Creating 7 MTD partitions on "omap2-nand.0": 0x000000000000-0x000000080000 : "X-Loader-NAND" 0x000000080000-0x000000200000 : "U-Boot-NAND" 0x0000001c0000-0x000000200000 : "Boot Env-NAND" 0x000000200000-0x000001e00000 : "Kernel-NAND" 0x000002000000-0x00000d400000 : "system" 0x00000d400000-0x000011400000 : "userdata" 0x000011400000-0x000013400000 : "cache" smsc911x: Driver version 2008-10-21. smsc911x-mdio: probed eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=3Dffffffff:01= ,=20 irq=3D-1) net eth0: MAC Address: 00:08:ee:03:2a:0d Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. android init android_probe pdata: c0684bb0 android_bind android_usb gadget: adding config #1 'android'/c06ab104 android_bind_config android_usb gadget: cfg 1/c06ab104 speeds: android_usb gadget: android_usb ready musb_hdrc musb_hdrc: MUSB HDRC host driver drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor =3D 0 usb usb1: New USB device found, idVendor=3D1d6b, idProduct=3D0002 usb usb1: New USB device strings: Mfr=3D3, Product=3D2, SerialNumber=3D= 1 usb usb1: Product: MUSB HDRC host driver usb usb1: Manufacturer: Linux 2.6.32.9-00001-g8d10978-dirty musb-hcd usb usb1: SerialNumber: musb_hdrc usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected hub 1-0:1.0: standalone hub hub 1-0:1.0: individual port power switching hub 1-0:1.0: no over-current protection hub 1-0:1.0: power on to power good time: 10ms hub 1-0:1.0: 100mA bus power budget for each child hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports drivers/usb/core/inode.c: creating file '001' f_adb init android_register_function adb f_mass_storage init android_register_function usb_mass_storage f_rndis init android_register_function rndis rndis_function_bind_config MAC: 02:05:43:33:32:30 android_usb gadget: using random self ethernet address android_usb gadget: using random host ethernet address usb0: MAC 02:96:06:2f:1b:90 usb0: HOST MAC b6:86:7c:cf:72:ef android_usb gadget: adding 'rndis'/dfae7cc0 to config 'android'/c06ab10= 4 rndis_register: configNr =3D 0 rndis_set_param_medium: 0 0 rndis_set_param_vendor: android_usb gadget: RNDIS: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in mass_storage_bind_config android_usb gadget: adding 'usb_mass_storage'/dfa70a00 to config=20 'android'/c06ab104 android_usb gadget: fsg_function_bind android_usb gadget: Number of LUNs=3D1 adb_bind_config android_usb gadget: adding 'adb'/dfae79c0 to config 'android'/c06ab104 android_usb gadget: adb_function_bind dev: dfae79c0 android_usb gadget: create_bulk_endpoints dev: dfae79c0 android_usb gadget: usb_ep_autoconfig for ep_in got ep4in android_usb gadget: usb_ep_autoconfig for adb ep_out got ep3out android_usb gadget: dual speed adb: IN/ep4in, OUT/ep3out hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 input: twl4030-keypad as=20 /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input0 twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 2 synaptics_ts_probe: Product Major Version 1 synaptics_ts_probe: Product Minor Version 3 synaptics_ts_probe: product property 2 synaptics_ts_probe: device control 81 synaptics_ts_probe: interrupt enable 3 synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0 synaptics_ts_probe: Sensor properties 601 synaptics_ts_probe: max_x 7515, max_y 4667 synaptics_ts_probe: inactive_x 0 0, inactive_y 0 0 synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0 input: synaptics-rmi-touchscreen as /devices/virtual/input/input1 synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in=20 interrupt mode using rtc device, twl_rtc, for alarms twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 i2c /dev entries driver Linux video capture interface: v2.00 omap-previewer omap-previewer: omap-previewer: Registered preview wrapp= er omap3isp omap3isp: Revision 15.0 found omap-iommu omap-iommu.0: isp: version 1.1 Saving csi2 context Restoring csi2 context Saving csi2 context Driver for 1-wire Dallas network protocol. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCILL protocol initialized cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver logger: created 64K log 'log_main' logger: created 256K log 'log_events' logger: created 64K log 'log_radio' logger: created 64K log 'log_system' Advanced Linux Sound Architecture Driver Version 1.0.21. No device for DAI twl4030 No device for DAI twl4030 Voice No device for DAI twl4030 Clock No device for DAI omap-mcbsp-dai-0 No device for DAI omap-mcbsp-dai-1 No device for DAI omap-mcbsp-dai-2 No device for DAI omap-mcbsp-dai-3 No device for DAI omap-mcbsp-dai-4 Zoom2 SoC init set mux for group mode =3D OMAP_MCBSP2_SLAVE mux: Setting signal mcbsp2_fsx.mcbsp2_fsx 0x0100 -> 0x0100 mux: Setting signal mcbsp2_clkx.mcbsp2_clkx 0x0100 -> 0x0100 mux: Setting signal mcbsp2_dr.mcbsp2_dr 0x0100 -> 0x0100 mux: Setting signal mcbsp2_dx.mcbsp2_dx 0x0000 -> 0x0000 No device for DAI null set mux for group mode =3D OMAP_MCBSP4_SLAVE mux: Setting signal mcbsp4_fsx.mcbsp4_fsx 0x0004 -> 0x0100 mux: Setting signal gpmc_ncs4.gpmc_ncs4 0x0000 -> 0x0102 mux: Setting signal gpmc_ncs5.gpmc_ncs5 0x0004 -> 0x0102 mux: Setting signal gpmc_ncs6.gpmc_ncs6 0x0104 -> 0x0002 TWL4030 Audio Codec init asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok asoc: twl4030 Voice <-> omap-mcbsp-dai-1 mapping ok asoc: null <-> omap-mcbsp-dai-1 mapping ok asoc: null <-> omap-mcbsp-dai-2 mapping ok ALSA device list: #0: Zoom2 (twl4030) oprofile: using timer Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (7676 buckets, 30704 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=3D1 kernel parameter, acct=3D1 nf_conntrack module op= tion or sysctl net.netfilter.nf_conntrack_acct=3D1 to enable it. ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Power Management for TI OMAP3. sr1_opp_margin[1]=3D37500 sr1_opp_margin[2]=3D37500 sr1_opp_margin[3]=3D37500 sr1_opp_margin[4]=3D62500 steps added, volt will berecaliberated automatically SR2:Fused Nvalues for VDD2OPP1 11192746 SmartReflex driver initialized Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "sad2d_ick" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1" VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 rotation =3D 0, var->rotate =3D 0 Console: switching to colour frame bu= ffer=20 device 100x30 OMAP DISPCONTROL read (stallmode)0 OMAP DISPCONTROL read (gpout)0 OMAP DISPCONTROL read (stallmode)0 omapdss DPI: Could not find exact pixel clock. Requested 21800 kHz, got= =20 21600 kHz sil9022 3-0039: sil9022 HDMI Chip version = =3D b0 regulator_init_complete: incomplete constraints, leaving VPLL2 on twl_rtc twl_rtc: setting system clock to 2000-02-24 20:28:34 UTC (95142= 4114) lv8093 2-0072: Registered lv8093 as V4L2 device. Registered lv8093 as i2c device. lv8093_lens_power_set(ON) lv8093 Lens HW detected lv8093_lens_power_set(OFF) Restoring csi2 context imx046_sensor_power_set(ON) Context config pixel format unsupported imx046 2-001a: model id detected 0x46 mfr 0xb, rev# 0x2 imx046 2-001a: imx046 chip version 0x02 detected imx046_sensor_power_set(OFF) Saving csi2 context Restoring csi2 context omap3 omap3isp CSI memvs initted Saving csi2 context omap_vout: registered and initialized video device 3 [v4l2] omap_vout: registered and initialized video device 4 [v4l2] net eth0: SMSC911x/921x identified at 0xe08b4000, IRQ: 318 usb0: eth_open ADDRCONF(NETDEV_UP): usb0: link is not ready Sending DHCP requests . hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend =2E, OK IP-Config: Got DHCP answer from 0.0.0.0, my address is 172.24.137.179 usb0: stop stats: rx/tx 0/0, errs 0/0 IP-Config: Complete: device=3Deth0, addr=3D172.24.137.179, mask=3D255.255.254.0, gw=3D= 172.24.136.2, host=3D172.24.137.179, domain=3Dapr.dhcp.ti.com, nis-domain=3D(no= ne), bootserver=3D0.0.0.0, rootserver=3D172.24.137.0, rootpath=3D Looking up port of RPC 100003/2 on 172.24.137.0 Looking up port of RPC 100005/1 on 172.24.137.0 VFS: Mounted root (nfs filesystem) on device 0:13. =46reeing init memory: 224K Warning: unable to open an initial console. usb usb1: uevent usb 1-0:1.0: uevent init: cannot open '/initlogo.rle' init: cannot find '/system/bin/pvrsrvinit', disabling 'pvrsrvinit' init: cannot find '/system/etc/install-recovery.sh', disabling=20 'flash_recovery' init: cannot find '/system/bin/fw3a_core', disabling 'fw3a' init: cannot find '/system/bin/playmp3', disabling 'bootsound' twl4030_usb twl4030_usb: HW_CONDITIONS 0x70/112; link 1 proc_load: Processor Loaded /system/lib/dsp/baseimage.dof omap mailbox rev 4.0 warning: `rild' uses 32-bit capabilities (legacy support in use) proc_start: dsp in running state procwrap_detach: deprecated dspbridge ioctl /bin/sh: can't access tty; job control turned off # eth0: no IPv6 routers present NFS: server 172.24.137.0 error: fileid changed fsid 0:d: expected fileid 0xbe2e57, got 0xbe2e4a -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html