From: Javier Herrero <jherrero@domain.hid>
To: Philippe Gerum <rpm@xenomai.org>
Cc: adeos-main@gna.org
Subject: Re: [Adeos-main] Problem with dm9000 and adeos-ipipe-2.6.34-blackfin-1.14-02.patch
Date: Thu, 07 Oct 2010 16:55:19 +0200 [thread overview]
Message-ID: <4CADDF57.4070609@domain.hid> (raw)
In-Reply-To: <1286462018.13186.44.camel@domain.hid>
Hi, Philippe,
Thank you very much for your answer. I later found that the interrupt
for the dm9000 was not defined OK in the platform data (it was somehow
enabled both for rising edge and for high level). Surprisingly, this
caused no problem without the adeos patch - this is the reason we did
never caught that error before!
Once this was corrected, the system boots OK and the network works, but
not OK - after a short while, two dm9000 driver messages 'status check
fail: 70' appears. These messages indicate a problem in the reading of
the dm9000 rx buffer. Once a status check of that kind appears, the
driver disables automatically the dm9000 interrupts.
Since now the system boots, I can easily check /proc/interrupt. I will
also check with the patch that you suggest, and come back with any news :)
Best regards,
Javier
El 07/10/2010 16:33, Philippe Gerum escribió:
> On Sun, 2010-10-03 at 21:18 +0200, Javier Herrero wrote:
>> Hello,
>>
>> I'm trying adeos on a Blackfin BF532 board with a DM9000 ethernet
>> interface. If ethernet is down (cable disconnected) the system boots and
>> works OK, but as soon as the ethernet cable is plugged, the system
>> apparently hangs. After several seconds, a message dm9000 dm9000.0:
>> status check fail: 226 appears.
>>
>> I've read a previous post about problems with dm9000 and an ARM
>> processor,
>> https://mail.gna.org/public/xenomai-help/2010-03/msg00147.html but it
>> seems that there was not a response.
>>
>
> dm9000 is probably not the important issue, what makes a difference is
> which kind of IRQ is handled by this device. Knowing about the output
> of /proc/interrupts when the pipeline is disabled would help.
>
> You may want to upgrade to this patch as well:
> http://download.gna.org/adeos/patches/v2.6/blackfin/older/adeos-ipipe-2.6.34-blackfin-1.15-01.patch
>
>
>> Thank you very much. Best regards,
>>
>> Javier
>>
>
--
------------------------------------------------------------------------
Javier Herrero EMAIL: jherrero@domain.hid
Chief Technology Officer
HV Sistemas S.L. PHONE: +34 949 336 806
Los Charcones, 17 FAX: +34 949 336 792
19170 El Casar - Guadalajara - Spain WEB: http://www.hvsistemas.com
next prev parent reply other threads:[~2010-10-07 14:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-03 19:18 [Adeos-main] Problem with dm9000 and adeos-ipipe-2.6.34-blackfin-1.14-02.patch Javier Herrero
2010-10-07 14:33 ` Philippe Gerum
2010-10-07 14:55 ` Javier Herrero [this message]
2010-10-07 15:03 ` Philippe Gerum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CADDF57.4070609@domain.hid \
--to=jherrero@domain.hid \
--cc=adeos-main@gna.org \
--cc=rpm@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.