From: Mauro Carvalho Chehab <mchehab@redhat.com>
To: "Igor M. Liplianin" <liplianin@me.by>
Cc: linux-media@vger.kernel.org
Subject: Re: [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card
Date: Thu, 14 Oct 2010 14:48:41 -0300 [thread overview]
Message-ID: <4CB74279.1070103@redhat.com> (raw)
In-Reply-To: <201010040135.59454.liplianin@me.by>
Em 03-10-2010 19:35, Igor M. Liplianin escreveu:
> Patches to support for NetUP Dual DVB-T/C-CI RF from NetUP Inc.
> http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF
>
> Features:
>
> PCI-e x1
> Supports two DVB-T/DVB-C transponders simultaneously
> Supports two analog audio/video channels simultaneously
> Independent descrambling of two transponders
> Hardware PID filtering
>
> Components:
>
> Conexant CX23885
> STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver
> Xceive XC5000 silicon TV tuner
> Altera FPGA for Common Interafce
>
> The following changes since commit c8dd732fd119ce6d562d5fa82a10bbe75a376575:
>
> V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102 (2010-10-01
> 18:14:35 -0300)
>
> are available in the git repository at:
> http://udev.netup.ru/git/v4l-dvb.git netup-for-media-tree
Hmm... it is not working... perhaps you forgot to run git update-server-info.
The better would be to enable git protocol instead.
>
> Abylay Ospan (6):
> cx23885: Altera FPGA CI interface reworked.
> stv0367: change default value for AGC register.
> stv0367: implement uncorrected blocks counter.
> cx23885, cimax2.c: Fix case of two CAM insertion irq.
> Fix CI code for NetUP Dual DVB-T/C CI RF card
> Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF card
>
> Igor M. Liplianin (14):
> Altera FPGA firmware download module.
> Altera FPGA based CI driver module.
> Support for stv0367 multi-standard demodulator.
> xc5000: add support for DVB-C tuning.
> Initial commit to support NetUP Dual DVB-T/C CI RF card.
> cx23885: implement tuner_bus parameter for cx23885_board structure.
> cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure.
> stv0367: Fix potential divide error
> cx23885: remove duplicate set interrupt mask
> stv0367: coding style corrections
> cx25840: Fix subdev registration and typo in cx25840-core.c
> cx23885: 0xe becomes 0xc again for NetUP Dual DVB-S2
> cx23885: disable MSI for NetUP cards, otherwise CI is not working
> cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter.
>
> drivers/media/common/tuners/xc5000.c | 18 +
> drivers/media/dvb/frontends/Kconfig | 7 +
> drivers/media/dvb/frontends/Makefile | 1 +
> drivers/media/dvb/frontends/stv0367.c | 3419 +++++++++++++++++++++++++
> drivers/media/dvb/frontends/stv0367.h | 62 +
> drivers/media/dvb/frontends/stv0367_priv.h | 211 ++
> drivers/media/dvb/frontends/stv0367_regs.h | 3614 +++++++++++++++++++++++++++
> drivers/media/video/cx23885/Kconfig | 12 +-
> drivers/media/video/cx23885/Makefile | 1 +
> drivers/media/video/cx23885/altera-ci.c | 841 +++++++
> drivers/media/video/cx23885/altera-ci.h | 102 +
> drivers/media/video/cx23885/cimax2.c | 24 +-
> drivers/media/video/cx23885/cx23885-cards.c | 116 +-
> drivers/media/video/cx23885/cx23885-core.c | 35 +-
> drivers/media/video/cx23885/cx23885-dvb.c | 175 ++-
> drivers/media/video/cx23885/cx23885-reg.h | 1 +
> drivers/media/video/cx23885/cx23885-video.c | 7 +-
> drivers/media/video/cx23885/cx23885.h | 7 +-
> drivers/media/video/cx25840/cx25840-core.c | 4 +-
> drivers/misc/Kconfig | 1 +
> drivers/misc/Makefile | 1 +
> drivers/misc/stapl-altera/Kconfig | 8 +
> drivers/misc/stapl-altera/Makefile | 3 +
> drivers/misc/stapl-altera/altera.c | 2739 ++++++++++++++++++++
> drivers/misc/stapl-altera/jbicomp.c | 163 ++
> drivers/misc/stapl-altera/jbiexprt.h | 94 +
> drivers/misc/stapl-altera/jbijtag.c | 1038 ++++++++
> drivers/misc/stapl-altera/jbijtag.h | 83 +
> drivers/misc/stapl-altera/jbistub.c | 70 +
> include/misc/altera.h | 49 +
Hmm... that's new for me... a driver at misc?
> 30 files changed, 12872 insertions(+), 34 deletions(-)
> create mode 100644 drivers/media/dvb/frontends/stv0367.c
> create mode 100644 drivers/media/dvb/frontends/stv0367.h
> create mode 100644 drivers/media/dvb/frontends/stv0367_priv.h
> create mode 100644 drivers/media/dvb/frontends/stv0367_regs.h
> create mode 100644 drivers/media/video/cx23885/altera-ci.c
> create mode 100644 drivers/media/video/cx23885/altera-ci.h
> create mode 100644 drivers/misc/stapl-altera/Kconfig
> create mode 100644 drivers/misc/stapl-altera/Makefile
> create mode 100644 drivers/misc/stapl-altera/altera.c
> create mode 100644 drivers/misc/stapl-altera/jbicomp.c
> create mode 100644 drivers/misc/stapl-altera/jbiexprt.h
> create mode 100644 drivers/misc/stapl-altera/jbijtag.c
> create mode 100644 drivers/misc/stapl-altera/jbijtag.h
> create mode 100644 drivers/misc/stapl-altera/jbistub.c
> create mode 100644 include/misc/altera.h
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-10-14 17:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-03 22:35 [GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card Igor M. Liplianin
2010-10-14 17:48 ` Mauro Carvalho Chehab [this message]
2010-10-14 17:54 ` Mauro Carvalho Chehab
2010-10-14 18:58 ` Igor M. Liplianin
2010-10-14 19:04 ` Mauro Carvalho Chehab
2010-10-14 18:11 ` Mauro Carvalho Chehab
2010-10-14 18:59 ` Mauro Carvalho Chehab
2010-10-16 8:07 ` Igor M. Liplianin
-- strict thread matches above, loose matches on Subject: below --
2010-10-11 19:15 Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CB74279.1070103@redhat.com \
--to=mchehab@redhat.com \
--cc=linux-media@vger.kernel.org \
--cc=liplianin@me.by \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.