[PATCH] Documentation about RS485 serial communications

[nicolas.ferre@atmel.com (Nicolas Ferre)]

Le 19/10/2010 19:22, Grant Edwards :
> On 2010-10-19, Alexander Stein <alexander.stein@systec-electronic.com> wrote:
>> On Tuesday 19 October 2010, 16:29:48 Grant Edwards wrote:
>>> On 2010-10-19, Claudio Scordino <claudio@evidence.eu.com> wrote:
>>>> +2. HARDWARE-RELATED CONSIDERATIONS
>>>> +
>>>> +   Some CPUs (e.g., Atmel AT91) contain a transceiver capable of working
>>>> both +   as RS232 and RS485.
>>>
>>> Pardon my curiosity, but I've looked at a few AT91 parts, and I've
>>> never seen on with an internal transceiver -- nor does Google seem
>>> able to find any.
>>>
>>> Frankly, I'd be pretty surprised, since it would be very difficult
>>> (fab-wise), to build a mircoprocessor with I/O cells capable of
>>> withstanding the voltage levels specified in RS232.
>>>
>>> Can you specify to which parts you're referring?
>>
>> I doubt the AT91 do have an internal transceiver but it has a
>> dedicated pin feature (RTS or CTS or something) which can be used to
>> switch between RS232 and RS485 by setting a bit in the USART provided
>> the pin is connected properly.
> 
> Yes, the AT91 UARTs do have a built-in half-duplex mode that will
> automatically control line direction by toggling RTS.
> 
> That can used to control external half-duplex hardware like an RS485
> transceiver or any RS232-connected half-duplex device like some
> modems.

Yes, that is a vocabulary misuse to talk about "transceiver" but the
idea of Claudio's documentation is that the USART can work in both full
and half duplex and then can comply with RS-232 and RS-485 modes like
you describe precisely in your post.

> Though the Atmel docs refer to it as "RS485 mode" there is no RS485
> transceiver in the AT91 parts (AFAIK), and "RS485 mode" isn't specific
> to RS485 - it can be used with any external half-duplex hardware.

Yes, for sure you will have to use an external transceiver.

Thanks for clarifications.

Best regards,
-- 
Nicolas Ferre