From: Patrick McHardy <kaber@trash.net>
To: KOVACS Krisztian <hidden@balabit.hu>
Cc: netdev@vger.kernel.org, netfilter-devel@vger.kernel.org,
Balazs Scheidler <bazsi@balabit.hu>,
David Miller <davem@davemloft.net>
Subject: Re: [PATCH v2 1/9] tproxy: split off ipv6 defragmentation to a separate module
Date: Thu, 21 Oct 2010 13:30:30 +0200 [thread overview]
Message-ID: <4CC02456.4050301@trash.net> (raw)
In-Reply-To: <20101021104709.5192.64336.stgit@este.odu>
Am 21.10.2010 12:47, schrieb KOVACS Krisztian:
> diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
> index 138a8b3..bb669b4 100644
> --- a/net/ipv6/netfilter/nf_conntrack_reasm.c
> +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
> @@ -73,7 +73,7 @@ static struct inet_frags nf_frags;
> static struct netns_frags nf_init_frags;
>
> #ifdef CONFIG_SYSCTL
> -struct ctl_table nf_ct_ipv6_sysctl_table[] = {
> +struct ctl_table nf_ct_frag6_sysctl_table[] = {
> {
> .procname = "nf_conntrack_frag6_timeout",
> .data = &nf_init_frags.timeout,
> @@ -97,6 +97,8 @@ struct ctl_table nf_ct_ipv6_sysctl_table[] = {
> },
> { }
> };
> +
> +static struct ctl_table_header *nf_ct_frag6_sysctl_header;
> #endif
>
> static unsigned int nf_hashfn(struct inet_frag_queue *q)
> @@ -623,11 +625,19 @@ int nf_ct_frag6_init(void)
> inet_frags_init_net(&nf_init_frags);
> inet_frags_init(&nf_frags);
>
> + nf_ct_frag6_sysctl_header = register_sysctl_paths(nf_net_netfilter_sysctl_path,
> + nf_ct_frag6_sysctl_table);
> + if (!nf_ct_frag6_sysctl_header)
> + return -ENOMEM;
This needs to call inet_frags_fini() on errors since inet_frags_init()
starts a timer to recalculate the secret.
> +
> return 0;
> }
>
> void nf_ct_frag6_cleanup(void)
> {
> + unregister_sysctl_table(nf_ct_frag6_sysctl_header);
> + nf_ct_frag6_sysctl_header = NULL;
> +
> inet_frags_fini(&nf_frags);
>
> nf_init_frags.low_thresh = 0;
> diff --git a/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
> new file mode 100644
> index 0000000..99abfb5
> --- /dev/null
> +++ b/net/ipv6/netfilter/nf_defrag_ipv6_hooks.c
> @@ -0,0 +1,131 @@
> +/* (C) 1999-2001 Paul `Rusty' Russell
> + * (C) 2002-2004 Netfilter Core Team <coreteam@netfilter.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/types.h>
> +#include <linux/ipv6.h>
> +#include <linux/in6.h>
> +#include <linux/netfilter.h>
> +#include <linux/module.h>
> +#include <linux/skbuff.h>
> +#include <linux/icmp.h>
> +#include <linux/sysctl.h>
> +#include <net/ipv6.h>
> +#include <net/inet_frag.h>
> +
> +#include <linux/netfilter_ipv6.h>
> +#include <linux/netfilter_bridge.h>
> +#include <net/netfilter/nf_conntrack.h>
> +#include <net/netfilter/nf_conntrack_helper.h>
> +#include <net/netfilter/nf_conntrack_l4proto.h>
> +#include <net/netfilter/nf_conntrack_l3proto.h>
> +#include <net/netfilter/nf_conntrack_core.h>
> +#include <net/netfilter/nf_conntrack_zones.h>
> +#include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
> +#include <net/netfilter/ipv6/nf_defrag_ipv6.h>
> +
> +static enum ip6_defrag_users nf_ct6_defrag_user(unsigned int hooknum,
> + struct sk_buff *skb)
> +{
> + u16 zone = NF_CT_DEFAULT_ZONE;
> +
> + if (skb->nfct)
> + zone = nf_ct_zone((struct nf_conn *)skb->nfct);
> +
> +#ifdef CONFIG_BRIDGE_NETFILTER
> + if (skb->nf_bridge &&
> + skb->nf_bridge->mask & BRNF_NF_BRIDGE_PREROUTING)
> + return IP6_DEFRAG_CONNTRACK_BRIDGE_IN + zone;
> +#endif
> + if (hooknum == NF_INET_PRE_ROUTING)
> + return IP6_DEFRAG_CONNTRACK_IN + zone;
> + else
> + return IP6_DEFRAG_CONNTRACK_OUT + zone;
> +
> +}
> +
> +static unsigned int ipv6_defrag(unsigned int hooknum,
> + struct sk_buff *skb,
> + const struct net_device *in,
> + const struct net_device *out,
> + int (*okfn)(struct sk_buff *))
> +{
> + struct sk_buff *reasm;
> +
> + /* Previously seen (loopback)? */
> + if (skb->nfct && !nf_ct_is_template((struct nf_conn *)skb->nfct))
> + return NF_ACCEPT;
> +
> + reasm = nf_ct_frag6_gather(skb, nf_ct6_defrag_user(hooknum, skb));
> + /* queued */
> + if (reasm == NULL)
> + return NF_STOLEN;
> +
> + /* error occured or not fragmented */
> + if (reasm == skb)
> + return NF_ACCEPT;
> +
> + nf_ct_frag6_output(hooknum, reasm, (struct net_device *)in,
> + (struct net_device *)out, okfn);
> +
> + return NF_STOLEN;
> +}
> +
> +static struct nf_hook_ops ipv6_defrag_ops[] = {
> + {
> + .hook = ipv6_defrag,
> + .owner = THIS_MODULE,
> + .pf = NFPROTO_IPV6,
> + .hooknum = NF_INET_PRE_ROUTING,
> + .priority = NF_IP6_PRI_CONNTRACK_DEFRAG,
> + },
> + {
> + .hook = ipv6_defrag,
> + .owner = THIS_MODULE,
> + .pf = NFPROTO_IPV6,
> + .hooknum = NF_INET_LOCAL_OUT,
> + .priority = NF_IP6_PRI_CONNTRACK_DEFRAG,
> + },
> +};
> +
> +static int __init nf_defrag_init(void)
> +{
> + int ret = 0;
> +
> + ret = nf_ct_frag6_init();
> + if (ret < 0) {
> + pr_err("nf_defrag_ipv6: can't initialize frag6.\n");
> + return ret;
> + }
> + ret = nf_register_hooks(ipv6_defrag_ops, ARRAY_SIZE(ipv6_defrag_ops));
> + if (ret < 0) {
> + pr_err("nf_defrag_ipv6: can't register hooks\n");
> + goto cleanup_frag6;
> + }
> + return ret;
> +
> +cleanup_frag6:
> + nf_ct_frag6_cleanup();
> + return ret;
> +
> +}
> +
> +static void __exit nf_defrag_fini(void)
> +{
> + nf_unregister_hooks(ipv6_defrag_ops, ARRAY_SIZE(ipv6_defrag_ops));
> + nf_ct_frag6_cleanup();
> +}
> +
> +void nf_defrag_ipv6_enable(void)
> +{
> +}
> +EXPORT_SYMBOL_GPL(nf_defrag_ipv6_enable);
> +
> +module_init(nf_defrag_init);
> +module_exit(nf_defrag_fini);
> +
> +MODULE_LICENSE("GPL");
>
>
next prev parent reply other threads:[~2010-10-21 11:30 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-21 10:47 [PATCH v2 0/9] tproxy: add IPv6 support KOVACS Krisztian
2010-10-21 10:47 ` [PATCH v2 2/9] tproxy: added const specifiers to udp lookup functions KOVACS Krisztian
2010-10-21 14:05 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 5/9] tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled KOVACS Krisztian
2010-10-21 14:11 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 3/9] tproxy: added udp6_lib_lookup function KOVACS Krisztian
2010-10-21 14:06 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 1/9] tproxy: split off ipv6 defragmentation to a separate module KOVACS Krisztian
2010-10-21 11:30 ` Patrick McHardy [this message]
2010-10-21 11:43 ` KOVACS Krisztian
2010-10-21 14:04 ` Patrick McHardy
2010-10-21 22:19 ` Eric Dumazet
2010-10-25 9:38 ` KOVACS Krisztian
2010-10-25 10:14 ` Eric Dumazet
2010-10-25 20:42 ` Patrick McHardy
2010-10-25 20:54 ` David Miller
2010-10-21 10:47 ` [PATCH v2 4/9] tproxy: added tproxy sockopt interface in the IPV6 layer KOVACS Krisztian
2010-10-21 14:09 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 6/9] tproxy: added IPv6 socket lookup function to nf_tproxy_core KOVACS Krisztian
2010-10-21 14:12 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 7/9] tproxy: added IPv6 support to the TPROXY target KOVACS Krisztian
2010-10-21 14:17 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 8/9] tproxy: added IPv6 support to the socket match KOVACS Krisztian
2010-10-21 14:20 ` Patrick McHardy
2010-10-21 10:47 ` [PATCH v2 9/9] tproxy: use the interface primary IP address as a default value for --on-ip KOVACS Krisztian
2010-10-21 14:21 ` Patrick McHardy
2010-10-21 14:26 ` Amos Jeffries
2010-10-21 14:48 ` Patrick McHardy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CC02456.4050301@trash.net \
--to=kaber@trash.net \
--cc=bazsi@balabit.hu \
--cc=davem@davemloft.net \
--cc=hidden@balabit.hu \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.